Page 625 of 3279
Re: What is in the post? The thread of and for GAS!
Posted: Mon Jul 02, 2012 1:05 am
by DannDubbleEwe
Re: What is in the post? The thread of and for GAS!
Posted: Mon Jul 02, 2012 3:28 am
by devnulljp
Was just about to buy a nice looking Warmoth neck for my tele, then I zoomed in on the headstock
ABORT! ABORT! ABORT!
Re: What is in the post? The thread of and for GAS!
Posted: Mon Jul 02, 2012 10:08 am
by Muse FTW
excane wrote:I already......already have 2 TAFM's

a vertical (old style) and new one horizontal with gate.
I need a NEW new vertical....rrrr right?
DANN - where is this mythical TAFM??!!!

Didn't know the new ones had gate. Now life just became more difficult.
Re: What is in the post? The thread of and for GAS!
Posted: Mon Jul 02, 2012 10:44 am
by excane
Muse FTW wrote:Didn't know the new ones had gate. Now life just became more difficult.
Yep. You could order it as an option with either a toggle or footsie.
Re: What is in the post? The thread of and for GAS!
Posted: Mon Jul 02, 2012 12:36 pm
by devnulljp
Re: What is in the post? The thread of and for GAS!
Posted: Mon Jul 02, 2012 3:22 pm
by stillborn
Want
[youtube]http://www.youtube.com/watch?v=VpzcvNqfSEc[/youtube]
Re: What is in the post? The thread of and for GAS!
Posted: Mon Jul 02, 2012 3:37 pm
by foomanfat
Hawt

Re: What is in the post? The thread of and for GAS!
Posted: Mon Jul 02, 2012 8:22 pm
by Zounds Perspex
Nice. I'm digging my new Protocaster quite a bit.
Re: What is in the post? The thread of and for GAS!
Posted: Mon Jul 02, 2012 8:54 pm
by Ashahalasin
stillborn wrote:Want
[youtube]http://www.youtube.com/watch?v=VpzcvNqfSEc[/youtube]
Oh God now I want that. I need to stop coming into this thread.
Re: What is in the post? The thread of and for GAS!
Posted: Mon Jul 02, 2012 10:02 pm
by Muse FTW
The GAS is finalizing into a few different areas:
Fuzz: AB-Synth
OD: Fuck OD
Reverb: RRR
Whammy: PS-6
Phaser: Whetstone/other
The RRR is at the top of the list, which takes out a decent chunk of the funds saved. I think I'll hold off on the Fuck OD even though I've wanted a drive for lower gain since The Elements is set to high gain. The oscillating fuzz keeps getting delayed for me because I'm not sure which iteration of the AB-Synth to hop on... and the usualy Whammy 5 or PS-6 debate always sidetracks me. Fuck my brain.
Oh, and I have GAS for a Sunny Day Delay even though I'm more than happy with my Timeline. I guess it's another one of those pedals that I just want after pining for it for so long.
Re: What is in the post? The thread of and for GAS!
Posted: Mon Jul 02, 2012 11:00 pm
by foomanfat
Got one of these guys coming.

That makes three different western straps for me.
Re: What is in the post? The thread of and for GAS!
Posted: Mon Jul 02, 2012 11:04 pm
by The4455
In: Blooghost's Rotovibe and Soundtank phaser, also maybe another rotovibe if n one outbids me

Also "Crime of teh century" and "suspiria soundtrack" on vinyl
Out: My only pay check this summer, but my birthday is soon

Re: What is in the post? The thread of and for GAS!
Posted: Tue Jul 03, 2012 1:15 am
by kbit
Drone Commander GAS coming on hard again...
Re: What is in the post? The thread of and for GAS!
Posted: Tue Jul 03, 2012 1:22 am
by skullservant
I came home today from a long (and final weekend) at my apartment down in Richmond to the Kramer 450g guitar I bought early last week. The guy described it as 'gently used' in the description, keep that in mind.
I opened up the package (very well packed, prompt speed, got here very fast) but upon opening the guitar case and inspecting the guitar I was kind of dumbfounded.
The neck pickup's rear screws had been taken out of the back of the guitar (where they are usually adjusted and connect the pickups to the actual guitar itself) and two holes had been drilled on either side of the pickup and the pickup itself had been driven into the body of the guitar with the inability to move or adjust it.
The neck itself has two additional holes drilled into it on top of the 3 original factory screws, but these screws were a tad to long and one of them made its way all the way through the aluminum neck, the wood inserts, the body, and the fret board so much so that the fret is chipped. It doesn't affect playability, but what in the hell?
Lastly, the pickup covers themselves are dented to hell and back. Like almost caved in. SO I messaged the seller, and having not left feedback for him yet, told him that I was not satisfied with my purchase (You dudes KNOW how much shit I sold to buy that guitar) and that I would like to discuss my findings before ANY feedback was left for him...
Re: What is in the post? The thread of and for GAS!
Posted: Tue Jul 03, 2012 1:27 am
by Mudfuzz
Dude! just dude!