ilovefuzz.com

Goo is great. Awesome to see some new custom work.

Broadband, Splits one expression or cv signal into 3 independent signals, each one has range and auxiliar range controls to set the amount of sweep (if it is an lfo) or amount (if its a fixed signal), has an cv out in case you decide to sync the signal into another device (so it will be 4 outs). Each channel has a toggle so you can set expression out or cv (0-5v) out, for those looking to manipulate different devices. There are 2 inputs and a switch to change them, so you can have an expression in the cv in and a lfo in the cv aux.

Wow, cool!
Just wondering, I think I remember you mentioned updating some of your pedals / circuits somewhere, are you still in the process of that?

yes, bigger case with more knobs and more exp/cv jacks. But some new stuff will come out first, for example an smaller/simpler version of the broadband will go out first (3 channels, 3 knobs and one input no footswitch)

Looks awesome adam! will there be a broadband broadcast combo? That would be killer.

Custom Trek, extra footswitch to select from 2 knobs for the range knob (PWM), when the led is red the top range knob is active and when the led is green the the range knob on the side or expression pedal is active.

Ooh, sick one, love it!

Sith Youth Orbit, crazy one, it has independent vol for dry signal, fuzz signal and vco signal, second footswitch activates a square wave tremolo to cut the signal mix on and off of the 3 voices (or one voice or 2 voices depending on how you set the vol knobs), also extra toggle to add modulation to the vco frequency.

Sith Youth Orbit, I love the graphic and the name! Demo? When will it be available? Looks like it will be fun!

that was a custom design/request, i could make another

6 knobber orbit, independent dry, vco and fuzz volume, that way you can shape the sound and get lots of awesome fuzz tones

6 knobber trek, extra knob for dry volume to add some clarity to the fuzz and extra knob to set the amount of internal modulation that changes the pulse width when you press the second (momentary) footswitch, the rate of the changes is determined by the frequency of the notes (similar to the molecule), once you release the switch it goes to what you have set the range knob or what you have plugged in the expression jack (expression pedal, lfo, cv controller, etc)

Custom Polypus + Broadcast : There are 2 taps outs (normally open and normally close) to sync other pedals, EXPRESSION out like a broadcast (will work when the tremolo is bypassed), expression in to control the rate or tap ratio or the lfo, and there's a switch so the the tap out are synced to the tap ratio of the lfo, so you can tap in the pedal and via the expression change the tap ratios so you can play/create some tap patterns with your delay or other devices with tap in.

It's BEAUTIFUL!

Synth Vader : Orbit + 8 knob Mantis