Zvex Invento Box + vex explains *HIS* InventoBox on pg. 10

[zackv]

but i'm not eating your current offering of soylent green because I know what it's made of....

the invento box is made out of people?!?!?



zack,

the fuzz probe is pretty cool.

Thanks. That dude's comments are a perfect example of "start typing, then engage brain."

[stanimal]

Awesome Zack vex just put me in my place!!!!

ILF rules!!!

Fell for it vex, don't waste your time, who cares what we think, forums were invented for opinions, if you choose to troll and engage people in tiffs about your products that's your call....

Poking fun at you and riling you up is something you always manage to get roped into, was not my intention when we started and yes, foreskin jokes make me laugh....

But just don't lose sight of the fact that we are fans and can be critical, you are welcome to defend your ideas and companies honor and ILF is one of the best places to do it (which is why I enjoying this way too much to have my feelings hurt)...

Rock on vex, glad you're here... And I'll chill my opinions until I get to try it out, because as a tinkerer I definitely will...

But recognize that opinions also mean we give a shit, and we are watching, and we are expectant of more cool stuff in the future....

[hazelwould]

Fuck, this thread proves... Nothing's sacred.

[hazelwould]

Awesome Zack vex just put me in my place!!!!

ILF rules!!!

Fell for it vex, don't waste your time, who cares what we think, forums were invented for opinions, if you choose to troll and engage people in tiffs about your products that's your call....

Poking fun at you and riling you up is something you always manage to get roped into, was not my intention when we started and yes, foreskin jokes make me laugh....

But just don't lose sight of the fact that we are fans and can be critical, you are welcome to defend your ideas and companies honor and ILF is one of the best places to do it (which is why I enjoying this way too much to have my feelings hurt)...

Rock on vex, glad you're here... And I'll chill my opinions until I get to try it out, because as a tinkerer I definitely will...

But recognize that opinions also mean we give a shit, and we are watching, and we are expectant of more cool stuff in the future....

Dude, honestly. Don't try to rationalize, it'll only get you sucked into this whirlwind of:

[magiclawnchair]

[youtube]http://www.youtube.com/watch?v=8Sp-VFBbjpE[/youtube]

[veteransdaypoppy]

!
Never thought I'd see Zachary around these parts.
Glad to have ya here, Vex. I would like to own a Fuzz Factory.

[bigchiefbc]

Wow, I thought I'd seen it all. Zack, even though we were at loggerheads in that ab-synth thread, its good to have you here.

As for the inventobox, I just want to make sure I get it before I form an opinion. So you basically just plug in PCBs in the upper part, and connect them to whatever pots you want, right? It looks like you can have more than two pcbs in there, but since you only have two stomp switches, you can only really switch between two signal paths. That's still cool. Is the plan to eventually offer all of your pedals as modules? Also, could I throw ANY pcb in there, or is there some specific layout it has to follow (thus you have to pump out the module for me)?

BTW - the probes and seeks are all awesome pedals. Ditto for the machine and loop junky.

[iblamesummers]

Wow...even though we were at loggerheads in that ab-synth thread, its good to have you here.

let's give Zvex an ILF sub-forum.

[zackv]

...Fell for it vex...

You were baiting? Nothing about your posts has any value to anyone here.

[zackv]

Wow, I thought I'd seen it all. Zack, even though we were at loggerheads in that ab-synth thread, its good to have you here.

As for the inventobox, I just want to make sure I get it before I form an opinion. So you basically just plug in PCBs in the upper part, and connect them to whatever pots you want, right? It looks like you can have more than two pcbs in there, but since you only have two stomp switches, you can only really switch between two signal paths. That's still cool. Is the plan to eventually offer all of your pedals as modules? Also, could I throw ANY pcb in there, or is there some specific layout it has to follow (thus you have to pump out the module for me)?

BTW - the probes and seeks are all awesome pedals. Ditto for the machine and loop junky.

Thanks.

The Inventobox does not require circuit boards at all. They just make assembly easier. You can use raw parts and design up anything you want! You need pins on the PC board to get them stuck into the socket. 0.1" spacing, DIP style, with the distance between the two rows of pins at .3" .4", or any .1" interval up to 1.1". Max height is .32" until I make the accessory that increases box height, when it will increase to 1.3" max height. That way you can put in sandwiched boards or tall components.

[stanimal]

...Fell for it vex...

You were baiting? Nothing about your posts has any value to anyone here.

................

again, glad you're here, but yours is a book easily read, not many chapters and all about opinions and beliefs that only matter to you..... and of course you have to have the last word... soooooooooo........

(insert zvex sarcastic remark here)

yeah, and the only thing i will ever post that SHOULD have value to people here is this: DO NOT TRY TO INTERACT WITH THIS MAN IF YOU HAVE AN OPINION AGAINST HIS OWN.... HE WILL GET PERSONAL AND NASTY IN A PUBLIC FORUM FOR THE SAKE OF HIS OWN SELF-GRATIFICATION....

oh wait...... (insert zvex sarcastic last word.....HERE)

[bigchiefbc]

Wow, I thought I'd seen it all. Zack, even though we were at loggerheads in that ab-synth thread, its good to have you here.

As for the inventobox, I just want to make sure I get it before I form an opinion. So you basically just plug in PCBs in the upper part, and connect them to whatever pots you want, right? It looks like you can have more than two pcbs in there, but since you only have two stomp switches, you can only really switch between two signal paths. That's still cool. Is the plan to eventually offer all of your pedals as modules? Also, could I throw ANY pcb in there, or is there some specific layout it has to follow (thus you have to pump out the module for me)?

BTW - the probes and seeks are all awesome pedals. Ditto for the machine and loop junky.

Thanks.

The Inventobox does not require circuit boards at all. They just make assembly easier. You can use raw parts and design up anything you want! You need pins on the PC board to get them stuck into the socket. 0.1" spacing, DIP style, with the distance between the two rows of pins at .3" .4", or any .1" interval up to 1.1". Max height is .32" until I make the accessory that increases box height, when it will increase to 1.3" max height. That way you can put in sandwiched boards or tall components.

K, thanks for the info. Have you thought about a copper-plate add-on so that we could make any circuit into a probe

[Big Mon]

holy shit-is it really you????!!!! Damn son,ZV infiltrated! I am the epitome of noob here,and know nothing of the inner workings of a pedal,but is the inventobox something even I could tackle? Wish I still had my fuzz factory. FUCK THE ECONOMY

[Chumley]

Oh em t3h gee its teh zv3x

[magiclawnchair]

K, thanks for the info. Have you thought about a copper-plate add-on so that we could make any circuit into a probe