Mountainking Electronics

General Gear Discussion - effects, synths, etc.

Moderator: Ghost Hip

Post Reply
User avatar
skullservant
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 16575
Joined: Wed Dec 28, 2011 12:55 am

Re: Mountainking Electronics

Post by skullservant »

I just got my Megalith today. I'm a bit torn about it. I dig the sounds coming out of it for the most part. I like it more on bass than guitar. The only thing I don't like is that the clipping seems a bit too square wave for my liking. Been playing around with it on and off all night. Going to give it a little more time. It's got a lot more low end than the Big Spider, but even the octave qualities of the Big Spider aren't as square/hissy as the clipping of the Megalith. I've been keeping the slope all the way down to combat the fizz, and the notch on 3 and around 3 o'clock to boost the mids
User avatar
excane
LORDOFDARKNESS
LORDOFDARKNESS
Posts: 7497
Joined: Sun Oct 02, 2011 12:13 pm
Location: NYC
Contact:

Re: Mountainking Electronics

Post by excane »

skullservant wrote:I just got my Megalith today. I'm a bit torn about it. I dig the sounds coming out of it for the most part. I like it more on bass than guitar. The only thing I don't like is that the clipping seems a bit too square wave for my liking. Been playing around with it on and off all night. Going to give it a little more time. It's got a lot more low end than the Big Spider, but even the octave qualities of the Big Spider aren't as square/hissy as the clipping of the Megalith. I've been keeping the slope all the way down to combat the fizz, and the notch on 3 and around 3 o'clock to boost the mids


Numero uno....post a pic :) I just loving seeing them

#2 It's VERY sensitive to what you're feeding it. You playing the Kramer through it?
User avatar
skullservant
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 16575
Joined: Wed Dec 28, 2011 12:55 am

Re: Mountainking Electronics

Post by skullservant »

Image

Switched out the knobs because such a big fuzz needs big knobs. It's #38. And yeah, been playing the Kramer through it. Usually play in the neck, but thats where it's been really square. Putting it in the bridge isn't as bad, but still noticeable. I've been using the buzz box for sub octave shit on top of it
User avatar
Demon666
experienced
experienced
Posts: 637
Joined: Fri Jan 07, 2011 2:41 am
Location: Brooklyn NY

Re: Mountainking Electronics

Post by Demon666 »

Try turning the input way down. I usually keep mine around 9:00 or less. It's pretty sensitive to what's going into it.
User avatar
skullservant
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 16575
Joined: Wed Dec 28, 2011 12:55 am

Re: Mountainking Electronics

Post by skullservant »

I'll have to try that out. I like the super saturation, just not the square clipping :(
User avatar
excane
LORDOFDARKNESS
LORDOFDARKNESS
Posts: 7497
Joined: Sun Oct 02, 2011 12:13 pm
Location: NYC
Contact:

Re: Mountainking Electronics

Post by excane »

Demon666 wrote:Try turning the input way down. I usually keep mine around 9:00 or less. It's pretty sensitive to what's going into it.


Definitely.

Skull - By the pic, you have the input all the way up which could/will cause problems depending on the bass, impedance, etc...

Where's da Spidaaa?? Nooooo!!!
User avatar
skullservant
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 16575
Joined: Wed Dec 28, 2011 12:55 am

Re: Mountainking Electronics

Post by skullservant »

Spider is in the corner! I am definitely digging the Spider into the Buzz Box but I'm trying to keep the board super minimal. Been A/B'ing stuff a majority of the night. I think tomorrow I will mess around with JUST the input knob and see what happens
User avatar
Demon666
experienced
experienced
Posts: 637
Joined: Fri Jan 07, 2011 2:41 am
Location: Brooklyn NY

Re: Mountainking Electronics

Post by Demon666 »

I find that it will really overload the pedal with it up like that. Making it sluggish and square waved. Also try the notch on 1 or 2 and around 11:00-2:30
User avatar
Wes Mantooth
Supporter
Supporter
Posts: 3643
Joined: Tue Feb 01, 2011 11:19 pm
Location: Minneapolis
Contact:

Re: Mountainking Electronics

Post by Wes Mantooth »

skullservant wrote:I just got my Megalith today. I'm a bit torn about it. I dig the sounds coming out of it for the most part. I like it more on bass than guitar. The only thing I don't like is that the clipping seems a bit too square wave for my liking. Been playing around with it on and off all night. Going to give it a little more time. It's got a lot more low end than the Big Spider, but even the octave qualities of the Big Spider aren't as square/hissy as the clipping of the Megalith. I've been keeping the slope all the way down to combat the fizz, and the notch on 3 and around 3 o'clock to boost the mids

I had that experience on guitar as well, loved the saturation but the clipping was too squarewave and fizzy no matter how I tweaked it, my guitar or my amp. This was just guitar to Mega to amp, no other pedals. I'd like to try it again with my sparkle motion as a dark boost to tame the top end.
User avatar
excane
LORDOFDARKNESS
LORDOFDARKNESS
Posts: 7497
Joined: Sun Oct 02, 2011 12:13 pm
Location: NYC
Contact:

Re: Mountainking Electronics

Post by excane »

skullservant wrote:Spider is in the corner! I am definitely digging the Spider into the Buzz Box but I'm trying to keep the board super minimal. Been A/B'ing stuff a majority of the night. I think tomorrow I will mess around with JUST the input knob and see what happens


Uhhh..... I was staring at the mEGAAaaa. Didn't see the spider :erm: :lol:

One other thing.... Alan added an input buffer on the newer 'liths, Behemo's, and Mag's to help them play better since the circuits are very sensitive to anything its fed.

I'm gonna guess no, but maybe ask him if he could mod yours? Even though the Kramer is passive, every PU makes a difference with the Mega. Do you have another bass you could try it with?
User avatar
Demon666
experienced
experienced
Posts: 637
Joined: Fri Jan 07, 2011 2:41 am
Location: Brooklyn NY

Re: Mountainking Electronics

Post by Demon666 »

So I have a crazy idea kicking around in me head that I was gonna ask Alan about to see if he could do. Since the Megalith , Magnatar, and huge box share the same eq. I was wondering if it would be possible to combine a pair of them into one box? I have to think about it some more but it's in the head space right now.
User avatar
skullservant
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 16575
Joined: Wed Dec 28, 2011 12:55 am

Re: Mountainking Electronics

Post by skullservant »

I remember putting the Mega around 3 o'clock and not being as upset with the clipping earlier today, but it was still present. Demon, Ill have to try that out. I like the thud of the 3rd notch, but I'll give the others more of a shot. I've got a buffer that I'll put before it tomorrow and see how it plays as well!
User avatar
Deltaphoenix
Supporter
Supporter
Posts: 4831
Joined: Sun Dec 04, 2011 1:38 am
Location: Gainesville, Fl
Contact:

Re: Mountainking Electronics

Post by Deltaphoenix »

Yeah input WAY Down, Output up a bit, and Notch on 1...my settings right now.
User avatar
Deltaphoenix
Supporter
Supporter
Posts: 4831
Joined: Sun Dec 04, 2011 1:38 am
Location: Gainesville, Fl
Contact:

Re: Mountainking Electronics

Post by Deltaphoenix »

Demon666 wrote:So I have a crazy idea kicking around in me head that I was gonna ask Alan about to see if he could do. Since the Megalith , Magnatar, and huge box share the same eq. I was wondering if it would be possible to combine a pair of them into one box? I have to think about it some more but it's in the head space right now.


Man, Alan seems kind of resistant these days to anything too custom. i asked him about a few things and essentially he just wasn't willing.
'
User avatar
excane
LORDOFDARKNESS
LORDOFDARKNESS
Posts: 7497
Joined: Sun Oct 02, 2011 12:13 pm
Location: NYC
Contact:

Re: Mountainking Electronics

Post by excane »

Deltaphoenix wrote:
Demon666 wrote:So I have a crazy idea kicking around in me head that I was gonna ask Alan about to see if he could do. Since the Megalith , Magnatar, and huge box share the same eq. I was wondering if it would be possible to combine a pair of them into one box? I have to think about it some more but it's in the head space right now.


Man, Alan seems kind of resistant these days to anything too custom. i asked him about a few things and essentially he just wasn't willing.
'


Yeah, he's really not doing custom things.

And the EQ's aren't the same in the Mega and Mag. I asked him very specifically about this, and they are different. Similar but still different.

The only thing that's the same is the Huge Box and Heavy Mach. Heavy starts with the Huge Box and expands on it with the notch/mids.
Post Reply