Page 326 of 2752

Re: Let's see your PEDAL BOARD!

Posted: Sat May 07, 2011 1:31 am
by Haki
Bassus Sanguinis wrote:Image
...doesn't perhaps look that much, compared to some other monstrosities, but believe me, I do A HELL OF A LOT of different things with this setup.


Understatement of the year? You can blow up Finland with that board.

Bassus Sanguinis wrote:...and then comes the McSpunckle fx And aardvark and the Br00tlz MiniGnome...


You don't want a full deluxe version? If you tidy up those cables a bit you could cram it in there.

Re: Let's see your PEDAL BOARD!

Posted: Sat May 07, 2011 2:30 am
by Bassus Sanguinis
Haki wrote:
Bassus Sanguinis wrote:Image
...doesn't perhaps look that much, compared to some other monstrosities, but believe me, I do A HELL OF A LOT of different things with this setup.


Understatement of the year? You can blow up Finland with that board.

Bassus Sanguinis wrote:...and then comes the McSpunckle fx And aardvark and the Br00tlz MiniGnome...


You don't want a full deluxe version? If you tidy up those cables a bit you could cram it in there.


IF FINLAND IS BLOWN AWAY TODAY IT'S BECAUSE OF THE FIRST FUZZIFER SHOW. :omg: :animal: :lol:

There sure is still more room in there, have to buy a cable set and tidy up the mess :whateva: AND later the Boss looper/sampler might end up going into my amp fx loop with the TSR-12. I really like the possibilities they both give me but neither of them likes my pedalboard signal level. :erm: No wonder, really.

The McSpunckle fx pedals are already in Finland, haven't just got the time to go to the Helsinki-Vantaa Airport Customs pot office. :no: Wanted to rock teh br00tz but no can do :facepalm: The DLX VTF is definitely on my want list but had to start from somewhere. So I sold a vint. Schaller fuzz for the McSpunckle fx And aardvark and the Br00tlz MiniGnome. :love:

Re: Let's see your PEDAL BOARD!

Posted: Sat May 07, 2011 2:43 am
by Eric!
I wish America had a
Bassus Sanguinis wrote:pot office.

Re: Let's see your PEDAL BOARD!

Posted: Sat May 07, 2011 5:38 am
by Bassus Sanguinis
Eric! wrote:I wish America had a
Bassus Sanguinis wrote:pot office.

:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:

Re: Let's see your PEDAL BOARD!

Posted: Sat May 07, 2011 10:11 am
by modernage
StupidDream88 wrote:Image

Still pretty much this.

Love it!

Re: Let's see your PEDAL BOARD!

Posted: Sat May 07, 2011 10:22 am
by trad3mark
I don't have pics of my guitar right now (my room is really messy after spending 4 days making architectural models, and i'm moving out in a week), but it's a Peavey EXP, with the neck pickup removed, and the bridge pickup replaced with a GFS Crunchy Rail. The amp is a Vox AD30VT, and this is my board:

Image

It's not all connected up, cos i've to get a new power supply, but it's something like this:
Input > Line 6 Constrictor > Digitech Whammy > ohnoho Blowing Up > eighty seven percent Issue 3.3 > eighty seven percent Issue 3.3 > Marshall Jackhammer > eighty seven percent Cannon (White Face Version) > EHX Big Muff > eighty seven percent Cannon (Red Face Version) > eighty seven percent Death Ray > eighty seven percent Snap to Grid + Behringer FX600 > Korg MiniKP > Amp

all the eighty seven percent stuff is all pedals i've built. The Issue 3.3 is a clean boost (I use 2 to go from boost > drive), and the two cannons are based on the big muff, but heavily modified, and running on germaniums. The White face version is dirtier, with 2 ge transistors, and 2 silicon ones, whereas the Red Face one is all germanium. Snap to Grid is a feedback loop.

Re: Let's see your PEDAL BOARD!

Posted: Sat May 07, 2011 11:52 am
by nieh
Haven't posted here in a while. Heres my small board.

Strat > Memory Toy > Logan 5 > Arc Flash > Crush Fuzz > Homemade gated Fuzz > Jet City JCA20

Image

Re: Let's see your PEDAL BOARD!

Posted: Sat May 07, 2011 11:57 am
by nieh
StupidDream88 wrote:Image

Still pretty much this.


What are those two pedals in the front? I'm guessing the one on the right is a SHO?

Re: Let's see your PEDAL BOARD!

Posted: Sat May 07, 2011 12:16 pm
by bigchiefbc
Bassus Sanguinis wrote:
bigchiefbc wrote:
Whoa, that looks exactly like my old AB-Synth. Did you buy that off me, Bassus, or off of someone else? I don't even remember who I sold it to.


I bought it from You, with the DE Soda Meiser (in 2009 when You needed the cash for the MoogerFooger). Says #23 in the side. 1/3 of this finish, one of the first custom XS size AB-Synths.


Ah, yes, I remember now. And that Moogerfooger became my DE Improbability Drive, which became my Sonic Alienator. Man, the lineage of my pedals is such a tangled web :!!!:

Re: Let's see your PEDAL BOARD!

Posted: Sat May 07, 2011 12:39 pm
by mathias
bigchiefbc wrote:Ah, yes, I remember now. And that Moogerfooger became my DE Improbability Drive, which became my Sonic Alienator. Man, the lineage of my pedals is such a tangled web :!!!:


I know the feeling. I was cleaning out my PMs and realized I traded my BIT to Gunnar Recall for a VFM, then I traded the VFM to Giant_Robot as part of the deal for my EQD pedals. :lol: And that's just one pedal and its lineage.. traded quite a few things over the years since I started playing boutique gear, though I've kept most of it rather than selling/trading. :thumb:

Re: Let's see your PEDAL BOARD!

Posted: Sat May 07, 2011 1:41 pm
by modernage
mathias wrote:
bigchiefbc wrote:Ah, yes, I remember now. And that Moogerfooger became my DE Improbability Drive, which became my Sonic Alienator. Man, the lineage of my pedals is such a tangled web :!!!:


I know the feeling. I was cleaning out my PMs and realized I traded my BIT to Gunnar Recall for a VFM, then I traded the VFM to Giant_Robot as part of the deal for my EQD pedals. :lol: And that's just one pedal and its lineage.. traded quite a few things over the years since I started playing boutique gear, though I've kept most of it rather than selling/trading. :thumb:


Hitting a little too close to home there....
Here's a little peek into my life:
Legend: "->" = a trade went down

Zvex Box of Metal off Ebay -> Zvex Ooh Wah II -> Moog Murf -> Dr Scientist Cleanness and RRminiR

Dr Scientist Cleanness -> my PaulC Timmy
Dr Scientist RRminiR -> ProCo Rat2 + $$$

Rat2 + Dano CC Fuzz -> EQD Sound Shank
$$$ -> probably used it to buy my Geiger Counter

Re: Let's see your PEDAL BOARD!

Posted: Sat May 07, 2011 1:46 pm
by Eric!
There are SO MANY WEBS over the past couple years...

Here's an example!
$$$ -> PP2+ from ebay -> RRminiR -> PitchFactor -> $$$

Re: Let's see your PEDAL BOARD!

Posted: Sat May 07, 2011 4:49 pm
by Teej212
trad3mark wrote:I don't have pics of my guitar right now (my room is really messy after spending 4 days making architectural models, and i'm moving out in a week), but it's a Peavey EXP, with the neck pickup removed, and the bridge pickup replaced with a GFS Crunchy Rail. The amp is a Vox AD30VT, and this is my board:

Image

It's not all connected up, cos i've to get a new power supply, but it's something like this:
Input > Line 6 Constrictor > Digitech Whammy > ohnoho Blowing Up > eighty seven percent Issue 3.3 > eighty seven percent Issue 3.3 > Marshall Jackhammer > eighty seven percent Cannon (White Face Version) > EHX Big Muff > eighty seven percent Cannon (Red Face Version) > eighty seven percent Death Ray > eighty seven percent Snap to Grid + Behringer FX600 > Korg MiniKP > Amp

all the eighty seven percent stuff is all pedals i've built. The Issue 3.3 is a clean boost (I use 2 to go from boost > drive), and the two cannons are based on the big muff, but heavily modified, and running on germaniums. The White face version is dirtier, with 2 ge transistors, and 2 silicon ones, whereas the Red Face one is all germanium. Snap to Grid is a feedback loop.


about time i see you over here!

Re: Let's see your PEDAL BOARD!

Posted: Sat May 07, 2011 4:54 pm
by warwick.hoy
StupidDream88 wrote:Image

Still pretty much this.


I like this setup even though I'm not a big M9/M13 lover. What are the two pedals on the bottom for? Bypass? Blend? ????

Re: Let's see your PEDAL BOARD!

Posted: Sat May 07, 2011 5:12 pm
by Eric!
I ...think you should put that M9 in a feedback looper