ilovefuzz.com

Here's the latest jenga on the Pedaltrain Jr...

Signal chain: a Boss OC-2 that turns on an off way too easily > Wounded Paw P90 with tape on the LED to make it less distracting > Polytune > loop switcher: fuzz side > Dunwich Fuzz Throne > Naga Viper boost also with tape to tame the super bright LED > loop switcher: clean side > Superego synth > Trinity reverb > loop switcher return > Ditto looper > JHS buffered splitter: side 1 > Echorec to a PVY VTM 60 | splitter side 2 > Ibanez Time Machine amp top echo box from the '80s into a Hovercraft Dwarvenaut 20. The swirly footswitch turns the Time Machine on and off.

The diagonal pedal is a bit of an assault on my OCD but it leaves room for all the necessary cables etc. With this arrangement I change the delay time on the Echorec every time I use the Ditto which is interesting. The Fuzz Throne is epic and sounds great no matter where you put the knobs. Everything is powered with a Voodoo Labs ISO5 plus a couple of daisy-chain cables.

fallen wrote:

Here's the latest jenga on the Pedaltrain Jr...

Signal chain: a Boss OC-2 that turns on an off way too easily > Wounded Paw P90 with tape on the LED to make it less distracting > Polytune > loop switcher: fuzz side > Dunwich Fuzz Throne > Naga Viper boost also with tape to tame the super bright LED > loop switcher: clean side > Superego synth > Trinity reverb > loop switcher return > Ditto looper > JHS buffered splitter: side 1 > Echorec to a PVY VTM 60 | splitter side 2 > Ibanez Time Machine amp top echo box from the '80s into a Hovercraft Dwarvenaut 20. The swirly footswitch turns the Time Machine on and off.

The diagonal pedal is a bit of an assault on my OCD but it leaves room for all the necessary cables etc. With this arrangement I change the delay time on the Echorec every time I use the Ditto which is interesting. The Fuzz Throne is epic and sounds great no matter where you put the knobs. Everything is powered with a Voodoo Labs ISO5 plus a couple of daisy-chain cables.

Interestingly you would have needed to tape up the FT but on that run I used lower intensity LEDs so you got lucky.

"Lower intensity" by Dunwich standards is still about 10000 candle power stronger than anything else.

new05002 wrote:

fallen wrote:

Here's the latest jenga on the Pedaltrain Jr...

Signal chain: a Boss OC-2 that turns on an off way too easily > Wounded Paw P90 with tape on the LED to make it less distracting > Polytune > loop switcher: fuzz side > Dunwich Fuzz Throne > Naga Viper boost also with tape to tame the super bright LED > loop switcher: clean side > Superego synth > Trinity reverb > loop switcher return > Ditto looper > JHS buffered splitter: side 1 > Echorec to a PVY VTM 60 | splitter side 2 > Ibanez Time Machine amp top echo box from the '80s into a Hovercraft Dwarvenaut 20. The swirly footswitch turns the Time Machine on and off.

The diagonal pedal is a bit of an assault on my OCD but it leaves room for all the necessary cables etc. With this arrangement I change the delay time on the Echorec every time I use the Ditto which is interesting. The Fuzz Throne is epic and sounds great no matter where you put the knobs. Everything is powered with a Voodoo Labs ISO5 plus a couple of daisy-chain cables.

Interestingly you would have needed to tape up the FT but on that run I used lower intensity LEDs so you got lucky.

Thanks for not blinding me.

Appropriate smiley: +150xp for passing a charisma check.

I have drooled all over myself.
Yes. Drooled....


Please excuse me.

I'm jamming in a new configuration (1 guitar instead of 2) so my board is about to get bigger. I am starting to look at power supplies just so I don't have to deal with constantly unplugging stuff. Time to educate myself zzzz

Noise board which is basically my bass board with a few extra bits and a Doepfer Dark Energy.

Signal path: Dark Energy > Dobsky bass > Pt999 > Hi-band Flanger > Freeze (modded with effects loop w/ HM2 > Gristlizer > Repeat Percussion in the loop) > bass looper (w/ Mutron III clone > PT80 delay with inifinite feedback switch > Ross Phaser) > Rub a dub reverb.

Updated:

What's the Black Vorba, man?

bubble font clone

Nice. How's it hold up to your original?

It's the closest I've found so far!

Cool, thanks man.
Wanna head down that path soon, myself.
Good to have a reference point.