ilovefuzz.com

take a break bro, that work will still be there tomorrow.
Look at some gear porn, Play a riff
I will send you a sweet vacation picture
from when I am Island Hopping in the Southern Caribbean
this Dec!

I want a clean bass amp head, for when i'm not trying to go nutz

Uncle Grandfather wrote:I'm not sure whats going on....i've been searching high and low for one of these and finally found a seller and made a deal. now he's backed out....
looks like foxtonemusic has recently taken over production of all flight of harmony gear, but they don't list the Infernal Noise Machine. guess i need to make a call. stupid gas
[youtube]http://www.youtube.com/watch?v=WLWPaZNf86M[/youtube]

Well that thing looks like fun and I love the name

I've been gassing for a Bass VI or a baritone jag after that Bass VI thread

ChetMagongalo wrote:I want a clean bass amp head, for when i'm not trying to go nutz

i got one of these on the way

im hoping its just that
super clean as clean can get
ive been on a bit of a gear tear lately
i think im gonna get an epi lp jr too
theres one for $70 on craigslist
or a special for $90
i want a shitty project guitar so bad
for lowlow oddball tunings

(i know its monday,sorry)

I'm going to be a dick here... Never played an epi LP I've liked. Do Yamaha make like a Pacifica LP copy? Played a cheapo strat copy that was awesome.

what didnt you like about it?
besides bein cheap crap
im gonna rip everything out of it
pretty much just goin for the skinny neck
really im gonna bastardize the fuck out of it
im open to suggestions
this is almost an experiment
if it works out ok ill do it on somethin better
but for now i need a sub $100 beater

I play an Epi LP Custom and really like it.
It's super comfortable and sounds great.
That being said it's one of the higher end Epis.
Although I'm considering flipping it to fund a bass vi or baritone.
Stupid gas.

I've only played low end shit and it was low end shit. Didn't intonate real well, frets felt crappy. I just didn't want to play them. But if you can try before you buy you might find one you like. They're probably cool too, and i haven't played one in years. I've played a couple of cheapo Yamahas. Cort are also good. Ish. my Ibanez RG-270 is pretty rad.

Pretty much spent Sunday browsing Beltom Brick based reverbs trying to find a kit or even schematics for something that would give me a reverb similar to the Sunshine Reverberations. The Tenebrion comes closest I think, although it lacks the Gain function. Most others would need to be more significantly modded. If I can find a way to mod the Tenebrion so that the reverb signal can run through an LPB or SHO withaster volume, I may be on to a winner the quest continues.....

IT IS MONDAY!!!!!!!! SHUT YOUR WHORE MOUTHS!!!!!!!!!!!!

jwar wrote:IT IS MONDAY!!!!!!!! SHUT YOUR WHORE MOUTHS!!!!!!!!!!!!

Thread Cop, Thread Cop...

chutneyfarmer wrote:Pretty much spent Sunday browsing Beltom Brick based reverbs trying to find a kit or even schematics for something that would give me a reverb similar to the Sunshine Reverberations. The Tenebrion comes closest I think, although it lacks the Gain function. Most others would need to be more significantly modded. If I can find a way to mod the Tenebrion so that the reverb signal can run through an LPB or SHO withaster volume, I may be on to a winner the quest continues.....

You want it on the verb only? or the entire circuit? Either way, it shouldn't be too hard.
Based on the schematic here: http://www.grindcustomsfx.com/forum/vie ... ?f=2&t=219
If you want it on the verb only, try putting your boost between where r6 and c5 connect to IC1D.
For boosting and adding gain to the entire thing, put it after r10.
Alternatively, if you'd like the ability to overload the brick before the output, try placing the boost between c2 and pin 9 of IC1C. (*I'm not sure how the brick will react to this, keep that in mind*)
Another option that is probably worth pursuing...try altering the setup on of IC1C or IC1D. For inspiration, try experimenting with the gain setup of other opamp driven devices...rat, dist+, tubescreamer, etc

as long as we say
"i was checkin this out ON SUNDAY"
or
"if this WAS SUNDAY Id totally be into this"
i think were ok
its like on illicit drug forums SWIM(someone who i met?)
"SWIM copped this many bags at such and such a corner"
"SWIM wanted an epi custom ON SUNDAY,
but SWIM couldnt afford it ON SUNDAY"

wait i think the most important thing here is
FUCK THE POLICE
and
FUCK RATS
you dudes are so not punk
ok ill shut it down
everydaysgonnabesundaywhenibecomegovernorofILFmotherfuckers

"

sonidero wrote:

jwar wrote:IT IS MONDAY!!!!!!!! SHUT YOUR WHORE MOUTHS!!!!!!!!!!!!

Thread Cop, Thread Cop...

Now I get what you were saying that one time!

Jero wrote:

chutneyfarmer wrote:Pretty much spent Sunday browsing Beltom Brick based reverbs trying to find a kit or even schematics for something that would give me a reverb similar to the Sunshine Reverberations. The Tenebrion comes closest I think, although it lacks the Gain function. Most others would need to be more significantly modded. If I can find a way to mod the Tenebrion so that the reverb signal can run through an LPB or SHO withaster volume, I may be on to a winner the quest continues.....

You want it on the verb only? or the entire circuit? Either way, it shouldn't be too hard.
Based on the schematic here: http://www.grindcustomsfx.com/forum/vie ... ?f=2&t=219
If you want it on the verb only, try putting your boost between where r6 and c5 connect to IC1D.
For boosting and adding gain to the entire thing, put it after r10.
Alternatively, if you'd like the ability to overload the brick before the output, try placing the boost between c2 and pin 9 of IC1C. (*I'm not sure how the brick will react to this, keep that in mind*)
Another option that is probably worth pursuing...try altering the setup on of IC1C or IC1D. For inspiration, try experimenting with the gain setup of other opamp driven devices...rat, dist+, tubescreamer, etc

PM'd you there dude. Thanks so much for all this info!