New INFANEM fuzz - 141g/141t
Moderator: Ghost Hip
- Disarm D'arcy
- Supporter

- Posts: 5104
- Joined: Sun Dec 04, 2011 5:04 pm
- Location: France
- Contact:
Re: New INFANEM fuzz - 141g
Ken is good at fuzz. I'm sure I can find a good reason to get one to pair with my 2nd voice.
Good deals: OsbornKT, Phantasmagorovich, UglyCasanova, DarkAxel, Skip, D.o.S, ColdBrightSunlight, Eivind August, Goroth
https://linktr.ee/disarmdarcy
https://linktr.ee/disarmdarcy
- neonblack
- IAMILFFAMOUS

- Posts: 8090
- Joined: Fri Feb 28, 2014 12:00 am
- Location: Wilmington, NC
Re: New INFANEM fuzz - 141g
Its weird, its less of a drive pedal and more of an extreme tone colorer. theres some gain but it never gets too hairy, even maxed out.
When I push it with other pedals, I really hear the separation of the two drives. Even more so with an octave up fuzz before it. I really love this thing. I gotta stop spending money though, I'm trying to save up for when Jwar flips that Polytope
Also. Didn't mean to turn this into a Driving Notion thread, but that's fine too. Not enough info online about this fine little box.
When I push it with other pedals, I really hear the separation of the two drives. Even more so with an octave up fuzz before it. I really love this thing. I gotta stop spending money though, I'm trying to save up for when Jwar flips that Polytope
Also. Didn't mean to turn this into a Driving Notion thread, but that's fine too. Not enough info online about this fine little box.
-
earthbound
- interested

- Posts: 33
- Joined: Wed Feb 22, 2012 3:12 am
- Location: NJ
- Contact:
Re: New INFANEM fuzz - 141g
Pics were just posted today and it looks killer. $99 is a steal.
- spacelordmother
- HERO

- Posts: 5719
- Joined: Sun May 16, 2010 4:45 pm
- Location: Rochester, NY
- Contact:
Re: New INFANEM fuzz - 141g
Yeah, ditto. No offence meant to Ken and his designs. It's just that (for better or worse) the world of fuzz is way less exciting to me without Devi in it.EvilCatBucky wrote:I didn't mean to imply that Ken couldn't come up with his own designs. His stuff is awesome. This just seemed kinda up Devi's alley and with her on the demoI just thought maybe they'd worked on it together or something. Honestly I'd be down for more Devi designed stuff as long as someone else handled the business side of it
![]()
And I do love the look of Infanem pedals.
- neonblack
- IAMILFFAMOUS

- Posts: 8090
- Joined: Fri Feb 28, 2014 12:00 am
- Location: Wilmington, NC
Re: New INFANEM fuzz - 141g
In the same way that a stable relationship is less exciting than an abusive yet passionate one?
- spacelordmother
- HERO

- Posts: 5719
- Joined: Sun May 16, 2010 4:45 pm
- Location: Rochester, NY
- Contact:
Re: New INFANEM fuzz - 141g
Never thought of it like that, but I suppose so!neonblack wrote:In the same way that a stable relationship is less exciting than an abusive yet passionate one?
- neonblack
- IAMILFFAMOUS

- Posts: 8090
- Joined: Fri Feb 28, 2014 12:00 am
- Location: Wilmington, NC
Re: New INFANEM fuzz - 141g
Still no specs or bass demo. Specs were supposed to go up the 10th, then the 11th. I don't care necessarily, I just hope this means Ken is super busy getting our pedals ready to ship 
- Uncle Grandfather
- IAMILFFAMOUS

- Posts: 8550
- Joined: Mon Oct 14, 2013 7:34 pm
Re: New INFANEM fuzz - 141g
i hope it means he's busy building my one off expression pedal for my faye's her....also gassin for my 141gneonblack wrote:I don't care necessarily, I just hope this means Ken is super busy getting our pedals ready to ship
- neonblack
- IAMILFFAMOUS

- Posts: 8090
- Joined: Fri Feb 28, 2014 12:00 am
- Location: Wilmington, NC
Re: New INFANEM fuzz - 141g
Details! Is it just a standard expression pedal in cool enclosure, or is there more?
- Uncle Grandfather
- IAMILFFAMOUS

- Posts: 8550
- Joined: Mon Oct 14, 2013 7:34 pm
Re: New INFANEM fuzz - 141g
no, no....it's just the standard extension pedal for the faye's her, it has two inputs for expression pedals...one for each phaser. he's just not making them anymore so he had to retool or whatever, really cool of him cause it turns the faye's her into a real monster. I just needed a second one cause i lost the first one.neonblack wrote:Details! Is it just a standard expression pedal in cool enclosure, or is there more?
-
odontophobia
- Supporter

- Posts: 5556
- Joined: Tue Jan 15, 2013 3:09 pm
- Location: grand rapids
Re: New INFANEM fuzz - 141g
in that breadboard demo this pedal gets so synth with just the tiniest hint of squealing here and there. like a more tame version of the LAL Octavella in some regards.
Definitely a cool demo.
Definitely a cool demo.
- neonblack
- IAMILFFAMOUS

- Posts: 8090
- Joined: Fri Feb 28, 2014 12:00 am
- Location: Wilmington, NC
Re: New INFANEM fuzz - 141g
SPEX!
The 141G Fuzz follows a typical Infanem formula: start with inspiring sounds, stretch them further with intuitive controls, then pack everything up neatly in the smallest possible enclosure. The result is a fuzzbox that pairs a huge range of modern textures and oscillation tones with classic touch sensitivity.
You also get high input impedance so the 141 G plays nice with all input sources, bass-friendly frequency response, and no finicky temperature sensitivities. And, thanks to its transparent gate control, you can have all the wild oscillation-driven fuzztones your heart desires while gating out oscillation between notes.
Controls:
IN-
Input gain.
OUT-
Volume. There's plenty on tap and a logarithmic potentiometer keeps it smoothly controllable.
FOCUS-
Filtered variably positive and negative feedback loops! These are the secret to the 141G's tonal range. Start at 12 o'clock and experiment.
LOW: Mostly affects the bass and low mids. Turn it up for more doomy rumble and a muffier feel. Trim it down for more sharp definition. Oscillations from higher LOW FOCUS settings favor subharmonic pulses and bass drones.
HIGH: Mostly affects the treble and high mids. Turn it up for more blow-your-ears-up noiserock screams and high note definition. Trim it down for less abrasive sounds. Oscillations from higher HIGH FOCUS settings are (??? this part just cuts off)
GATE-
A transparent gate control that retains all of the character, tone, and feel of your fuzztone without the noise between notes. Indeed, your source remains connected to the fuzz circuit and the circuit is allowed to continue oscillating; it's just disconnected from the output.
The gate triggers directly from the input, allowing the threshold to remain fixed regardless of IN/FOCUS settings.
So yeah, very excited.
The 141G Fuzz follows a typical Infanem formula: start with inspiring sounds, stretch them further with intuitive controls, then pack everything up neatly in the smallest possible enclosure. The result is a fuzzbox that pairs a huge range of modern textures and oscillation tones with classic touch sensitivity.
You also get high input impedance so the 141 G plays nice with all input sources, bass-friendly frequency response, and no finicky temperature sensitivities. And, thanks to its transparent gate control, you can have all the wild oscillation-driven fuzztones your heart desires while gating out oscillation between notes.
Controls:
IN-
Input gain.
OUT-
Volume. There's plenty on tap and a logarithmic potentiometer keeps it smoothly controllable.
FOCUS-
Filtered variably positive and negative feedback loops! These are the secret to the 141G's tonal range. Start at 12 o'clock and experiment.
LOW: Mostly affects the bass and low mids. Turn it up for more doomy rumble and a muffier feel. Trim it down for more sharp definition. Oscillations from higher LOW FOCUS settings favor subharmonic pulses and bass drones.
HIGH: Mostly affects the treble and high mids. Turn it up for more blow-your-ears-up noiserock screams and high note definition. Trim it down for less abrasive sounds. Oscillations from higher HIGH FOCUS settings are (??? this part just cuts off)
GATE-
A transparent gate control that retains all of the character, tone, and feel of your fuzztone without the noise between notes. Indeed, your source remains connected to the fuzz circuit and the circuit is allowed to continue oscillating; it's just disconnected from the output.
The gate triggers directly from the input, allowing the threshold to remain fixed regardless of IN/FOCUS settings.
So yeah, very excited.
- goosekevin
- Supporter

- Posts: 2236
- Joined: Tue Jul 10, 2012 10:25 pm
- Location: NSW Australia
Re: New INFANEM fuzz - 141g
thats fucking sick, very glad i jumped on this
love how the gate switch works
cant wait!
love how the gate switch works
cant wait!
Derelict78 wrote:That probably sounds awful in the best possible way.
- Uncle Grandfather
- IAMILFFAMOUS

- Posts: 8550
- Joined: Mon Oct 14, 2013 7:34 pm
Re: New INFANEM fuzz - 141g
Yeah, the demo sold me more than any specs will though.goosekevin wrote:thats fucking sick, very glad i jumped on this
love how the gate switch works
cant wait!
- goosekevin
- Supporter

- Posts: 2236
- Joined: Tue Jul 10, 2012 10:25 pm
- Location: NSW Australia
Re: New INFANEM fuzz - 141g
Yeah definitely! But about reading what's possible with it only adds to the anticipationUncle Grandfather wrote:Yeah, the demo sold me more than any specs will though.goosekevin wrote:thats fucking sick, very glad i jumped on this
love how the gate switch works
cant wait!
Derelict78 wrote:That probably sounds awful in the best possible way.