Page 279 of 408
Re: Let's see your finished DIY projects!
Posted: Thu Jan 01, 2015 6:06 pm
by Gigahearts_FX
Jero wrote:^Damn I want one of those^
Full release is January 2nd allegedly, so you will be able to buy one soon
Just make sure you get a legit pt2399
I can't help feeling the multiplex and zero point are just as good or better however but it depends what you want.
There are plans for a 4 x mn3008 dirtbag at some point, too.
Re: Let's see your finished DIY projects!
Posted: Thu Jan 01, 2015 7:05 pm
by Jero
Gone Fission wrote:Jero wrote:^Damn I want one of those^
One of the most frequent responses I have when reading ILF, but totally. Wish I had caught on to this project. I may have to just wait for the updated BBD DMM boards instead.
Gigahearts_FX wrote:Full release is January 2nd allegedly, so you will be able to buy one soon
Just make sure you get a legit pt2399
I can't help feeling the multiplex and zero point are just as good or better however but it depends what you want.
There are plans for a 4 x mn3008 dirtbag at some point, too.
I really just like the idea of it...and your execution on the finished product
I've never been a bbd/tape/etc purist. That being said, nothing I've played really gets that MM sound. Been meaning to make one of those Multiplex's. They seem awesome.
Re: Let's see your finished DIY projects!
Posted: Thu Jan 01, 2015 7:34 pm
by Gigahearts_FX
Jero wrote:
I really just like the idea of it...and your execution on the finished product
I've never been a bbd/tape/etc purist. That being said, nothing I've played really gets that MM sound. Been meaning to make one of those Multiplex's. They seem awesome.
cheers breaux
I made a couple of the MN3005 dirtbags, they are pretty legit.
Sold one, kept one....
Keeper
Sold (for too little....
)
My big box reissue sounds the best outta any of them though.
Re: Let's see your finished DIY projects!
Posted: Fri Jan 02, 2015 11:36 am
by Gone Fission
For those who don't want to wait for fab'ed boards, there is a vero for the Dirtbaby:
http://guitar-fx-layouts.42897.x6.nabbl ... 15783.html
It looks like it is unverified so far. And note cautions about the "trails" version towards the bottom of the page.
Re: Let's see your finished DIY projects!
Posted: Sun Jan 04, 2015 12:18 am
by UglyCasanova
Ian, those are insanely good looking!
Re: Let's see your finished DIY projects!
Posted: Sun Jan 04, 2015 4:52 pm
by resincum
UglyCasanova wrote:Ian, those are insanely good looking!
Re: Let's see your finished DIY projects!
Posted: Mon Jan 05, 2015 4:44 am
by Gigahearts_FX
UglyCasanova wrote:Ian, those are insanely good looking!
Thank you. The white one lives in Denmark now....
Re: Let's see your finished DIY projects!
Posted: Fri Jan 09, 2015 2:13 am
by DannDubbleEwe
Yeah, those are KILLER man.
Re: Let's see your finished DIY projects!
Posted: Sun Jan 11, 2015 6:37 am
by TheTransient
Fixed up the first green muff clone I built. Rebuilt the board and it fixed whatever was causing the issue before.
Re: Let's see your finished DIY projects!
Posted: Mon Jan 12, 2015 7:41 am
by digi2t
Re: Let's see your finished DIY projects!
Posted: Mon Jan 12, 2015 8:11 am
by Gigahearts_FX
very nice Dino
Do you goop the ICs? If so, why?
It looks like it from the photo...
Re: Let's see your finished DIY projects!
Posted: Mon Jan 12, 2015 9:17 am
by digi2t
Gigahearts_FX wrote:very nice Dino
Do you goop the ICs? If so, why?
It looks like it from the photo...
No, it's not goop. It's a new process that I'm testing to prevent the IC's from ever falling out. It's a quick cure epoxy that I've brushed on from where the IC meets the socket on one side, over the top, and over to the other side. Sort of like a "glue strap" if you will. It's thin enough to crack with an IC removal tool if ever the IC needs to be removed, and thin enough that you can read the writing on the IC. You can see that on the lowest IC on the board. Lousy lighting blanked out the others.
I used to use hot glue in the past, but I decided to futz around a bit, and see if I could come up with something more... elegant?
Re: Let's see your finished DIY projects!
Posted: Tue Jan 20, 2015 10:17 am
by ran_dizolph
Just finished this one up last night:
Re: Let's see your finished DIY projects!
Posted: Tue Jan 20, 2015 7:56 pm
by Gigahearts_FX
Sweet rat!
Re: Let's see your finished DIY projects!
Posted: Wed Jan 21, 2015 10:13 am
by ran_dizolph
Gigahearts_FX wrote:Sweet rat!
Thanks!
Got to try out my new soldering station for the first time on this build...what a difference! Was previously using the orange Weller pen and burning through a tip every other build.
