ilovefuzz.com

I knew this was you qersty as soon as I saw that photo

qersty wrote:

I want to experiment more with stacking. Which pedals do you find stack best in your setup?

boss and the like since they have rubber on both sides they stick together better

qersty wrote:boss and the like since they have rubber on both sides they stick together better

that makes a lot of sense.

Brought Randy out of semi-retirement. Thinking a shallow water is gonna fill the hole there

Signal Path:
Diamond Comp > Randy > Mini > Buzzz > Dizzytone > LAL > Freaker Wah > Tonal Recall > Avalance > Pitchblack

Fuzz_Pi wrote:

Brought Randy out of semi-retirement. Thinking a shallow water is gonna fill the hole there

Signal Path:
Diamond Comp > Randy > Mini > Buzzz > Dizzytone > LAL > Freaker Wah > Tonal Recall > Avalance > Pitchblack

this board ruuuuuuulez! i have the buzzz to match your mini from that val-day run!

My board mountain. Rearranged and not all patched yet but let's check it anyway in this phase because why not

Fuzz_Pi wrote:

Brought Randy out of semi-retirement. Thinking a shallow water is gonna fill the hole there

Signal Path:
Diamond Comp > Randy > Mini > Buzzz > Dizzytone > LAL > Freaker Wah > Tonal Recall > Avalance > Pitchblack

dizzy plus the LAL

Monarch wrote:My board mountain. Rearranged and not all patched yet but let's check it anyway in this phase because why not

those old ibbyz are cool. do you have the pitch shifter one?

goosekevin wrote:this board ruuuuuuulez! i have the buzzz to match your mini from that val-day run!

Hey thanks man. In between Brian being MIA and now the virtual non-existence of tubes it feels like all my gear is more precious than ever.

Monarch wrote:My board mountain. Rearranged and not all patched yet but let's check it anyway in this phase because why not

What's the Vox pedal ?

I used to have the Compressor (which I loved at the time) and currently have a Chorus which I've converted to take a 9v power supply.

Looks like the 1901 Distortion

qersty wrote:those old ibbyz are cool. do you have the pitch shifter one?

Yes, the one on the top is like Harmonizer/Pitch shifter (and delay), model HD1000

Paul_C wrote:What's the Vox pedal ?

That's Vox 1094 Autowah. And btw. this one http://prntscr.com/ST2M7yqMFHPS is a Guyatone PS-104 auto wah, the same pedal inside. I like it very much so I had to buy another one as a backup if first one somehow dies, lal

Fuzz_Pi wrote:

lal

Looking for new dirt to replace the Muff. And I might try a Fairfield Accountant instead of the Guyatone ST2. Other than that, I'm pretty much set. Trying to convince myself to clean things up and wire everything up with solderless patch cables.

Here's my first ever completed board. I'm running a PRS Silver Sky through this board into my Fender Twin Reverb Tone Master. Looking to eventually add an expression/volume pedal on to the Swiss Things but haven't found the right one yet. My first loop is the bottom row (unbuffered) starting with the EQD Data Corrupter, Keeley Compressor, JerroStomps Fuzzo, Walrus Kangra, EHX Biff Muff Nano, EQD Plumes and finally EQD Westwood (which I just added this week and am LOVING). Second loop (buffered) started at the EHX Riddle Qballs, then MXR Phase 90, EQD Rainbow Machine, EQD Avalance Run then Ditto Looper+. I would love to have a discussion about signal order and what you might do to improve it. Also, with the EQD Swiss Things I can run two amps so I want to try a wet/dry setup. I have a Fender Mustang LT25 so my questions is, do you typcially run the more powerful amp as the reverb amp? Or is it the other way around? Thanks gang!