ilovefuzz.com

Posted: **Tue Apr 22, 2014 8:26 am**

Not an amazing picture as I snapped it quickly on my phone before bed last night but alas, this thing rocks.

heavily modded rat with FAC control.
Sonic Violence!

Posted: **Tue Apr 22, 2014 8:55 am**

fuzzhead wrote:
Jero wrote:Pickdropper, that delay looks excellent! How much/easy was the setup with PPP for just one decal?

HorsSujet wrote:Brilliant artwork. This is really amazing !
Thank you! The original art is from the Sweet Tooth comics, by Jeff Lemire.

fuzzhead wrote:
That thing is nuts! Kind of tempted, but I bet wiring it was a nightmare.
Not that bad, me and the wires are good friends I built it 5 years ago when I began with electronic things.. In fact I have unboxed some diy pedals I had, and then put everything in this box, it is a prototype, just like a big pedal with several circuits inside. Perhaps it would be better to make a large single circuit and make it all cleaner, I can do it but.. since then I never had to open it other than to change a 3PDT footswitch. It has served me well .. Once a guy offered me $600 and I refused! I have too many good memories in that thing!

That's an impressive build. I don't think I would've sold that for $600 either. There's lots of work there.

Posted: **Tue Apr 22, 2014 8:57 am**

wildebelor wrote:Not an amazing picture as I snapped it quickly on my phone before bed last night but alas, this thing rocks.

heavily modded rat with FAC control.
Sonic Violence!

Dude...that looks awesome.
Can you line up a demo?

Posted: **Tue Apr 22, 2014 9:04 am**

Jero wrote:Pickdropper, that delay looks excellent! How much/easy was the setup with PPP for just one decal?

It's really no different setting them up to do one enclosure or a bunch. The pricing isn't very good for a single enclosure, though. They charge $20 to print a single box, but it goes down to $5 a box if you have four boxes with the same image. I did that for this one and just have a few extras that I can use in the future.

Posted: **Tue Apr 22, 2014 9:05 am**

This is a miniaturized Mutron V. I used the same mods that Madbean came up with for his Kraken PCB.

Posted: **Tue Apr 22, 2014 9:28 am**

Iommic Pope wrote: Dude...that looks awesome.
Can you line up a demo?

Yeah not a problem man - I actually just flew back home (two states away) to use the studio for demoing songs and recording pedal samples so I'm glad I brought the Sonic Violence to demo.
The FAC just adds a world of control and colour.
Really happy with how it turned out.
Not sure if the production pedals will be etched or screen printed however!

Posted: **Tue Apr 22, 2014 8:27 pm**

That etch looks super rad.
Cool man, thanks! Looking forward to it.

Posted: **Thu Apr 24, 2014 2:43 am**

wildebelor wrote:
Iommic Pope wrote: Dude...that looks awesome.
Can you line up a demo?
Yeah not a problem man - I actually just flew back home (two states away) to use the studio for demoing songs and recording pedal samples so I'm glad I brought the Sonic Violence to demo.
The FAC just adds a world of control and colour.
Really happy with how it turned out.
Not sure if the production pedals will be etched or screen printed however!

By a FAC mod, do you mean changing the coupling cap with a rotary switch?

Posted: **Thu Apr 24, 2014 4:11 am**

Well, considering that's exactly what an FAC is - yep!

Posted: **Sat Apr 26, 2014 10:58 pm**

wildebelor wrote:Well, considering that's exactly what an FAC is - yep!

I was not sure so I thought I would ask. I love your etch and the fonts you used. Look forward to an audio demo.

Cody

Posted: **Sun Apr 27, 2014 2:17 am**

Hey cody,

The sound demos are available here:

https://soundcloud.com/midnightamplific ... e-sample-1

AND

https://soundcloud.com/midnightamplification/sv-slp

Do yourself a favour and listen to this through anything BUT laptop speakers haha

Posted: **Fri May 02, 2014 10:53 pm**

Here's a plug for Small Bear's Bare Box. The challenge was to design a PNP Fuzz Face, and use the Bare Box system to enclose it. I up'd the ante, and went for a Big Muff. I also added a boost control for the mids.

The circuit is a mix of Triangle, and Ram's Head values, plus some special values to please my ears. It really rocks. Transistors are BC550C.

For those interested, here is the layout;

Of course, no video, means it never existed, right?

[youtube]http://www.youtube.com/watch?v=nLWD-3mBKJE[/youtube]

Posted: **Sat May 03, 2014 12:54 pm**

Great work man! The Bear Boxes are cool. I need to get a few more of those.

Posted: **Wed May 07, 2014 12:30 am**

Posted: **Wed May 07, 2014 12:34 am**

cloudscapes wrote:

what is?

ilovefuzz.com

Let's see your finished DIY projects!

Re: Let's see your finished DIY projects!

Re: Let's see your finished DIY projects!

Re: Let's see your finished DIY projects!

Re: Let's see your finished DIY projects!

Re: Let's see your finished DIY projects!

Re: Let's see your finished DIY projects!

Re: Let's see your finished DIY projects!

Re: Let's see your finished DIY projects!

Re: Let's see your finished DIY projects!

Re: Let's see your finished DIY projects!

Re: Let's see your finished DIY projects!

Re: Let's see your finished DIY projects!

Re: Let's see your finished DIY projects!

Re: Let's see your finished DIY projects!

Re: Let's see your finished DIY projects!