ilovefuzz.com

The signal chain is:
Volume pedal > Mooer Yellow Comp > Longsword > ZVez Lofi Loop Junky > Pladask FORM(but loaded with programs from the upcoming Fabrikat(time stretch ingen, freeze, etc) > RV-3.

I love this small setup. Compact and light weight(2.8 kg), but I can do a lot with this. Did a recording session with this as my main setup+Boomerang III, and didn't miss anything.

ognoy wrote:The signal chain is:
Volume pedal > Mooer Yellow Comp > Longsword > ZVez Lofi Loop Junky > Pladask FORM(but loaded with programs from the upcoming Fabrikat(time stretch ingen, freeze, etc) > RV-3.

I love this small setup. Compact and light weight(2.8 kg), but I can do a lot with this. Did a recording session with this as my main setup+Boomerang III, and didn't miss anything.

Yeah that's really tight. Seems like daisy chaining is a huge weight saver. Definitely looks awesome!

PeteeBee wrote:

ognoy wrote:The signal chain is:
Volume pedal > Mooer Yellow Comp > Longsword > ZVez Lofi Loop Junky > Pladask FORM(but loaded with programs from the upcoming Fabrikat(time stretch ingen, freeze, etc) > RV-3.

I love this small setup. Compact and light weight(2.8 kg), but I can do a lot with this. Did a recording session with this as my main setup+Boomerang III, and didn't miss anything.

Yeah that's really tight. Seems like daisy chaining is a huge weight saver. Definitely looks awesome!

I had the fairly light weight Strymon Ojai on my last board, but it definately helps.
None of the pedals really need large amounts of power, so the daisy chain works just fine.

so, because i'm too busy/lazy to nubble through a manual right now and y'all are SMART and way more up to date on pedals and their peccadilloes than i am........ Eventide H9 question please to -

if you have a mono signal running into Input 01, will it send a duplicate signal to Output 01 and Output 02? using mono effects algorithms of course.

murp?

edit - diiiiiiiiid check the manual -

"he H9 detects which input and output jacks have cables plugged in and routes audio I/O accordingly. With a Mono Input (Input 1) and Stereo Outputs, the dry contribution for both
outputs comes from the Mono Input (Input 1)"

this means if it should work how i want? 1 input will give me 2 separate identical outputs?

behndy wrote:so, because i'm too busy/lazy to nubble through a manual right now and y'all are SMART and way more up to date on pedals and their peccadilloes than i am........ Eventide H9 question please to -

if you have a mono signal running into Input 01, will it send a duplicate signal to Output 01 and Output 02? using mono effects algorithms of course.

murp?

edit - diiiiiiiiid check the manual -

"he H9 detects which input and output jacks have cables plugged in and routes audio I/O accordingly. With a Mono Input (Input 1) and Stereo Outputs, the dry contribution for both
outputs comes from the Mono Input (Input 1)"

this means if it should work how i want? 1 input will give me 2 separate identical outputs?

yeh

An undying love of Boss pedals + need for something tiny =

I'm waiting a Pedaltrain Metro16 to srink down my live setup
In the meanwhile here's my PT-Jr live ambient based setup:

Somnambulance wrote: yeh

lol. succinct!

yurp. set it up. works. WOOT GHETTO PATCH BAY.

JM > Tuner > SS/BS Mini > Little Big Muff > SS/BS TAFM > Julia > SMMH > Boss DSD-2 > Polara > Boss TR-2 > Peavey Special 130


I'm getting bored with the LBM, any suggestions ?

gila_crisis wrote:I'm waiting a Pedaltrain Metro16 to srink down my live setup
In the meanwhile here's my PT-Jr live ambient based setup:

That springboard

Adding a Fourth Board really ties the room together.

It's a tiny new baby board!

ziltoid wrote:It's a tiny new baby board!

nshuman wrote:Adding a Fourth Board really ties the room together.

Somehow I don't think that room'll be complete until there're pedals all around the perimeter.

nshuman wrote:Adding a Fourth Board really ties the room together.

goddamn