Re: Let's see your PEDAL BOARD!
Posted: Sun Jul 23, 2017 3:59 pm
a very SPARTAN SETUP.
More like negative bone. Wait, no that's not right. Mega bone. Boner even.
Tone is in the finger tips anyway. Everyone knows that.
Page 2380 of 2752
Re: Let's see your PEDAL BOARD!
Posted: Sun Jul 23, 2017 4:22 pm
Re: Let's see your PEDAL BOARD!
Posted: Sun Jul 23, 2017 4:50 pm
That setup has bypass pedals, great cables, 4 dedicated buffers, 2 line drivers, some always on buffer bypasses. The tone is the same through the board or direct in the amp. Just have to do it right.vidret wrote:There simply can't be any tone left running through this. negative tone.weebles wrote:oh yeah this is totally normalnshuman wrote:I will post it later. They are all wired together, it's not such a crazy signal chain.goroth wrote:Whats the signal chain for any one of those?nshuman wrote:Some changes to the setup, some new pedals.
Re: Let's see your PEDAL BOARD!
Posted: Sun Jul 23, 2017 5:41 pm
They just jelly.
Re: Let's see your PEDAL BOARD!
Posted: Sun Jul 23, 2017 6:18 pm
LOL It would be interesting for YOU to approximate cable runs, internal pedal wiring lengths, factor in bypass pedals/blenders/loopers that isolate longer chains. Calculate the effect of line drivers, buffers, etc. Then maybe calculate signal decay? Or, you know, whatever.vidret wrote:with the amount of distance your signal runs through bypassed solderings on pedals who cares if you have great cables
to be serious though, i'd be super interested in hearing a recording of you going through all of this, then taking the cable from your guitar and going into the amp.
Re: Let's see your PEDAL BOARD!
Posted: Sun Jul 23, 2017 6:32 pm
FIGHT FIGHT FIGHT
And Jwar: tone is in the bonertip, doy.
And Jwar: tone is in the bonertip, doy.
Re: Let's see your PEDAL BOARD!
Posted: Sun Jul 23, 2017 6:39 pm
So, the signal chain is kind of simple and stays pretty short depending on what is or is not activated:
Top Level Chain:
Bass > SFX MicroThumpinator (HPF+Buffer) > Ploytune Mini 2 > SFX B3 > SFX Micro EQ (used as first line driver) > Broughton Broughctave > COG T-16 > SouthAMPTon Fifth Gear v2 > Broughton PowerStage > FEA DE-CL > H9 [Wounded Paw Blender V4 in effects loop] > Broughton Asure Skiez > Broughton JoshWah > CT5 > SouthAMPton Ictineo > Junction BOX > H9 > Broughton Archetype > Broughton Super Stack > Lehle DC Filter > SFX D][plomat > AMPS
---
Wounded Paw Blender v4 Chain:
A: CLean
B: Broughton Sentinel
C: Fairfield Barbershop > SFX Micro Red Dragon mk II > Broughton Azure Drive
D: Buffer Buster Ball Buster > SFX 42 > SFX Micro Fuzz > Broughton Pi > Broughton Sunder Fuzz v2 > Dunwich Volt Thrower > Broughton Bass Box > Cornish Buffer clone
---
Junction Box (bypassable) Chain:
Bypass Box > Board #3
---
Bypass Box Chain:
Cornish Buffer Clone > COG Grand Tarkin > SouthAMPTon Boosted Fuzz > Puhzing > MOOG Freqbox > Moog Ringmod > Moog LPF > MOOG Phaser > MOOG CLusterflux > MOOG Delay (104m) > MIDI MUrf > Back to Bypass Box
---
Board #3 (After bypass box but also in the junction box chain)
Cali76 G P > Hudson Broadcast > SOuthAMPTon All Things Equal v2 > Heinseberg > Broughton Transboost > Cornish buffer clone > Broughton AMplitude > Fairfield Accountant > Valve Caster v2 (higher voltage heaters) > Broughton Dunder Mufflin > Broughton PLL > Dunwich Wizard Fuzz > Broughton Terraformer > SGFX Imperial > MODEL 001 > FEA Photon Fuzz > DITTO > Beat Buddy > Broughton MONOBLOCK II > Broughton PHAETON > FEA DE-CL > Broughton HLPF > Broughton Studio One > Cali76 TX > SFX buffered splitter > back to junction Box.
I am probably forgetting stuff, but this is good enough.
Top Level Chain:
Bass > SFX MicroThumpinator (HPF+Buffer) > Ploytune Mini 2 > SFX B3 > SFX Micro EQ (used as first line driver) > Broughton Broughctave > COG T-16 > SouthAMPTon Fifth Gear v2 > Broughton PowerStage > FEA DE-CL > H9 [Wounded Paw Blender V4 in effects loop] > Broughton Asure Skiez > Broughton JoshWah > CT5 > SouthAMPton Ictineo > Junction BOX > H9 > Broughton Archetype > Broughton Super Stack > Lehle DC Filter > SFX D][plomat > AMPS
---
Wounded Paw Blender v4 Chain:
A: CLean
B: Broughton Sentinel
C: Fairfield Barbershop > SFX Micro Red Dragon mk II > Broughton Azure Drive
D: Buffer Buster Ball Buster > SFX 42 > SFX Micro Fuzz > Broughton Pi > Broughton Sunder Fuzz v2 > Dunwich Volt Thrower > Broughton Bass Box > Cornish Buffer clone
---
Junction Box (bypassable) Chain:
Bypass Box > Board #3
---
Bypass Box Chain:
Cornish Buffer Clone > COG Grand Tarkin > SouthAMPTon Boosted Fuzz > Puhzing > MOOG Freqbox > Moog Ringmod > Moog LPF > MOOG Phaser > MOOG CLusterflux > MOOG Delay (104m) > MIDI MUrf > Back to Bypass Box
---
Board #3 (After bypass box but also in the junction box chain)
Cali76 G P > Hudson Broadcast > SOuthAMPTon All Things Equal v2 > Heinseberg > Broughton Transboost > Cornish buffer clone > Broughton AMplitude > Fairfield Accountant > Valve Caster v2 (higher voltage heaters) > Broughton Dunder Mufflin > Broughton PLL > Dunwich Wizard Fuzz > Broughton Terraformer > SGFX Imperial > MODEL 001 > FEA Photon Fuzz > DITTO > Beat Buddy > Broughton MONOBLOCK II > Broughton PHAETON > FEA DE-CL > Broughton HLPF > Broughton Studio One > Cali76 TX > SFX buffered splitter > back to junction Box.
I am probably forgetting stuff, but this is good enough.
Re: Let's see your PEDAL BOARD!
Posted: Sun Jul 23, 2017 6:59 pm
mathias wrote:They just jelly.
Re: Let's see your PEDAL BOARD!
Posted: Sun Jul 23, 2017 6:59 pm
I need to rewrite my board.
Re: Let's see your PEDAL BOARD!
Posted: Sun Jul 23, 2017 7:40 pm
Accurate.mathias wrote:They just jelly.
Re: Let's see your PEDAL BOARD!
Posted: Sun Jul 23, 2017 7:42 pm
YesSomnambulance wrote:I need to rewrite my board.
Re: Let's see your PEDAL BOARD!
Posted: Sun Jul 23, 2017 8:37 pm
It's a spartan set up because he has 300 pedals on his board.behndy wrote:a very SPARTAN SETUP.
Re: Let's see your PEDAL BOARD!
Posted: Sun Jul 23, 2017 8:47 pm
HAH.Inconuucl wrote:It's a spartan set up because he has 300 pedals on his board.behndy wrote:a very SPARTAN SETUP.
or, can hold off as many as he wants with his Three Hundy Noise Combos?
super pimper setup suh. seems well thought out and massive with potentialities.
lol. just. like. PLEASE tell me you don't lug all that to shows. i was DYING from one PT Pro board and a small second amp bugger board.
Re: Let's see your PEDAL BOARD!
Posted: Sun Jul 23, 2017 9:12 pm
Shows? LOL This is all strictly for messing around at home. My kids can use the pedals to build their own boards when they get older.behndy wrote:HAH.Inconuucl wrote:It's a spartan set up because he has 300 pedals on his board.behndy wrote:a very SPARTAN SETUP.
or, can hold off as many as he wants with his Three Hundy Noise Combos?
super pimper setup suh. seems well thought out and massive with potentialities.
lol. just. like. PLEASE tell me you don't lug all that to shows. i was DYING from one PT Pro board and a small second amp bugger board.
Re: Let's see your PEDAL BOARD!
Posted: Sun Jul 23, 2017 11:05 pm
vidret wrote:uhm.. yeah, a recording of all of this, and then a recording without any of it?nshuman wrote:LOL It would be interesting for YOU to approximate cable runs, internal pedal wiring lengths, factor in bypass pedals/blenders/loopers that isolate longer chains. Calculate the effect of line drivers, buffers, etc. Then maybe calculate signal decay? Or, you know, whatever.vidret wrote:with the amount of distance your signal runs through bypassed solderings on pedals who cares if you have great cables
to be serious though, i'd be super interested in hearing a recording of you going through all of this, then taking the cable from your guitar and going into the amp.
You know, to see what the difference might be (if any)
Sure, if I felt like I owed some sort of proof to some stranger on the internet.