Page 3 of 5
Re: Elektron Digitakt
Posted: Wed Mar 07, 2018 11:40 am
by aen
molokaio wrote:if I'm not mistaken the octatrack mkI can do this even more extensively, and it kinda is in the same ballpark pricewise
Speaking of which: The MKII update to the Octatrack is almost entirely comsetic, thought there are a couple easier shortcuts/dedicated buttons, I guess. The functionality/capabilities are the same. So yeah, now that used OTs are like $800 and under, it makes these choices harder. It seems like the Digitakt is kind of an "Octatrack light" hidden in a foxy new box.
And yes I do want one.
Re: Elektron Digitakt
Posted: Wed Mar 07, 2018 11:51 am
by DRodriguez
I just picked up an analog 4 and octatrack for 1250 shipped. Deals are out there making it cheap.
Minor difference, the inputs are balanced in the mkII. But software is identical.
Re: Elektron Digitakt
Posted: Wed Mar 07, 2018 11:55 am
by aen
Wow, nice score! I'm really interested in the A4. Now that the octotrack makes sense to me I'd really like to pair it with an elektron synth.
Re: Elektron Digitakt
Posted: Wed Mar 07, 2018 12:03 pm
by DRodriguez
I'm still working on the making sense part. Have had them for a grand total of 36 hours. A4 was fairly easy to get working instantly. Octatrack has a little bit of a learning curve.
I'll bring them to the foam party chez j'angle if you want to try it out.
Re: Elektron Digitakt
Posted: Wed Mar 07, 2018 2:27 pm
by Dr. Sherman Sticks M.D.
i think it made more sense, when the digitakt was released it was like $100 cheaper.
then i think they switched it to include over bridge rather than charging extra for it. and made it $100 more?
Re: Elektron Digitakt
Posted: Thu Mar 08, 2018 4:33 am
by D Rock
Ev_O))) wrote:Man I own an Analog 4 and I want one of these to pair with it so bad. A4 can't output the sequencer via MIDI, but the DT can and I'm killing to bring trig conditions to other gear/software.
Dude before you buy it for just that... It can't retrig external midi, at least with the current firmware. I was hoping that it could as well but basically it can only retrig internal samples, which is still super cool and a fun feature, but I was under the impression it could do midi as well. Fingers crossed for midi retrigs in 2.0, I mean it is a no-brainer right? Unless there is a problem with midi hardware receiving retrigs(freezing, etc.).
Re: Elektron Digitakt
Posted: Thu Mar 08, 2018 6:19 am
by ognoy
Can any of the Elektron boxes play unsynced loops?
Thinking of getting a sampler, but will most likely use it for drones, time stretched pianos etc, so to be able to have different length(and not in sync) loops/samples is a deal-breaker.
Re: Elektron Digitakt
Posted: Thu Mar 08, 2018 6:34 am
by DRodriguez
Yes, octatrack can. It has various sync setting including unsynced that can be changed per track instantly. It can also do unsynced but restart all loops once the master track plays x amount of times. You can also overdub onto any of the 8 tracks. And sample from other tracks.
Re: Elektron Digitakt
Posted: Thu Mar 08, 2018 1:46 pm
by aen
DRodriguez wrote:I'm still working on the making sense part. Have had them for a grand total of 36 hours. A4 was fairly easy to get working instantly. Octatrack has a little bit of a learning curve.
I'll bring them to the foam party chez j'angle if you want to try it out.
I was pretty lost when going into the manual, youtube was the magic bullet.
Re: Elektron Digitakt
Posted: Fri Mar 09, 2018 12:36 am
by Ev_O)))
D Rock wrote:Ev_O))) wrote:Man I own an Analog 4 and I want one of these to pair with it so bad. A4 can't output the sequencer via MIDI, but the DT can and I'm killing to bring trig conditions to other gear/software.
Dude before you buy it for just that... It can't retrig external midi, at least with the current firmware. I was hoping that it could as well but basically it can only retrig internal samples, which is still super cool and a fun feature, but I was under the impression it could do midi as well. Fingers crossed for midi retrigs in 2.0, I mean it is a no-brainer right? Unless there is a problem with midi hardware receiving retrigs(freezing, etc.).
Shit really? Fark you've saved me man.
Does anyone know if you can use conditional triggers on the octatrack's MIDI sequencer with he latest firmware?
If not, my other option is a CV to MIDI converter. Disting Mk4 does it with the MIDI breakout box but I'm petrified if I dip my toes into modular that I'll eventually diving all the way in....
Re: Elektron Digitakt
Posted: Fri Mar 09, 2018 11:42 am
by Dr. Sherman Sticks M.D.
retrigs are different from conditional trigs.
you can do midi conditional trigs w/ the DT. its right on the main page of any midi track.
Re: Elektron Digitakt
Posted: Wed Mar 28, 2018 9:42 am
by worra
Buuuuump
I have one of these out for delivery today! I've watched quite a few videos while waiting and I'm stooooooked.
Re: Elektron Digitakt
Posted: Wed Mar 28, 2018 9:54 am
by Inconuucl
I want I want I want I'm going to jawr jwar jwar my pretty years years years for this this this yes yes yes
Re: Elektron Digitakt
Posted: Wed Mar 28, 2018 10:30 am
by DRodriguez
Dooooeeeett
Re: Elektron Digitakt
Posted: Thu Mar 29, 2018 1:09 am
by Psyre
Inconuucl wrote:I want I want I want I'm going to jawr jwar jwar my pretty years years years for this this this yes yes yes
I've proposed this move to my collaborator and wife on many occasions and suprisingly they always talk me out of it. Needless to say, I'll be eyeing your earnings and stroking my stubble.