ilovefuzz.com

Send it to Aen.
Get him to fill it with joy
DIRGECRAFT.
Profit.

COILY WALNUT TRIPLE MOSES

There is room for a lot of coils and LEDs, I think we're on to a winner here.

monkeydancer wrote:

goroth wrote:How many knobs and switches is it drilled for?

Somewhere between many and lots...

Brb

Edit: looks like 10 knobs, 5 stomps, 6 holes for little switches/leds. Could probably get by with one led depending on exactly how many separate things are in it and how much they need switches...

http://www.parasitstudio.se/intotheunknown.html
It's PLL dude!
That's one stomp, 3 switches and 8 knobs two leds.
http://www.parasitstudio.se/sonicreducer.html
One stomp and two more knobs one led.

3 stomps, 0 knobs no little holes left.

Put a green ringer on a stomp, with one of the stomps for a massive jewel LED.

One stomp as a momentary kill-switch.
OR, even cooler. Put a no-knob delay in there. Not sure if both LEDs are necessary in the PLL, so you could use one of the small holes there for a 9mm pot for delay time. Or a three-way switch with fixed delay times, giving you three different delay times. Or fixed delay time and three-way switch for tone - dark, darker and darkerer!

PLL>SRR>simple delay.

BOOM!

Faceless FX dude is from your neck of the woods, he might be able to do it. If not there is a guy in Sthlm who looks aight. I've also had some stuff built by TurnipFarm and he rules.

goroth wrote:

monkeydancer wrote:

goroth wrote:How many knobs and switches is it drilled for?

Somewhere between many and lots...

Brb

Edit: looks like 10 knobs, 5 stomps, 6 holes for little switches/leds. Could probably get by with one led depending on exactly how many separate things are in it and how much they need switches...

http://www.parasitstudio.se/intotheunknown.html
It's PLL dude!
That's one stomp, 3 switches and 8 knobs two leds.
http://www.parasitstudio.se/sonicreducer.html
One stomp and two more knobs one led.

3 stomps, 0 knobs no little holes left.

Put a green ringer on a stomp, with one of the stomps for a massive jewel LED.

One stomp as a momentary kill-switch.
OR, even cooler. Put a no-knob delay in there. Not sure if both LEDs are necessary in the PLL, so you could use one of the small holes there for a 9mm pot for delay time. Or a three-way switch with fixed delay times, giving you three different delay times. Or fixed delay time and three-way switch for tone - dark, darker and darkerer!

PLL>SRR>simple delay.

BOOM!

Faceless FX dude is from your neck of the woods, he might be able to do it. If not there is a guy in Sthlm who looks aight. I've also had some stuff built by TurnipFarm and he rules.

What a devastating machine this would be. True destrvction

I vote against PLL.
Do anything but PLL.
Really, PLL sucks, it sounds weak.
Honestly.


*** reverse Trump mode deactivated ***

Parasit Studio is cool though, if you're looking for circuit boards that another builder can put together then that would be the first place I'd look as well so I'm with goroth.

I would fill it with cheap old DOD/Boss guts. DS-1? Death Metal? Grunge? Five of 'em.

Keep some of the controls internal and use the holes for circuit bend switches and patchbay action.

Probably be way cheaper than getting someone to build a PLL, too.

Ruiner wrote:fill it with Skittles. When people hand you a dollar you tell them they can keep all the skittles that come out. They'll see all the holes and be like "SWEET DEAL BRAH!" and then you'll turn it over and they'll only fit out of 4 of the holes. Most likely getting stuck so they might get one or two.... PROFIT!

This is the best thing I've read this week. Do this, monk.

You can stick 10mm LED's where the two extra footswitches are because having 5 placed like that would be awkward anyway.

Dunno. Honestly If someone asked me to do this, I'd probably turn it down. I don't like being limited by something like pre-drilled holes. Why not get Evan to do something with it? He's building again and is pretty creative with using pre-drilled boxes.

Or go DIY like suggested above.

DIY is definitely on my mind but would be a long project because I'm dumb! Could be fun though. Didn't realise Evan was building again, might hit him up...

Totally get you on turning it down, why limit yourself?

That parasit pll looks kinda cool...

Limiting myself is based on cost versus benefit. So when I'm limited (and trust me it's happened many times), I end up losing money. LOL. Not saying no one would do it, but I couldn't.

I'd say go with Evan if you can. If not, there's probably plenty of builder that could muster up something.


The RM 1N would be somewhat difficult to put in there though because of PCB size and because of the pots being board mounted. It's not impossible, just more difficult and more risk to be assumed.

Nah definitely not doing that, love the enclosure it comes in anyway!