Page 3 of 9

Re: The general Bananana thread

Posted: Tue Jan 10, 2017 12:52 am
by aholidayatthesea
That new pedal of yours is going to slay though, Teej.

Re: The general Bananana thread

Posted: Tue Jan 10, 2017 5:10 pm
by K2000
whoismarykelly wrote:Will Montreal Assembly make all their stuff in bare enclosures? That 856 and CT5 both look great.
Yes, if you request it. At least, he did it for me (Count to 5 and Goodbye24).

Re: The general Bananana thread

Posted: Tue Jan 10, 2017 5:55 pm
by elevenstrings
K2000 wrote:
whoismarykelly wrote:Will Montreal Assembly make all their stuff in bare enclosures? That 856 and CT5 both look great.
Yes, if you request it. At least, he did it for me (Count to 5 and Goodbye24).
Same here. I just asked. I need to upgrade my CT5 at some point (mine's from the first batch) so hopefully he'll be cool doing it again.

Re: The general Bananana thread

Posted: Fri Jan 20, 2017 9:00 pm
by Eivind August
o hai

[youtube]http://www.youtube.com/watch?v=KXr0KdVO6pk[/youtube]

Re: The general Bananana thread

Posted: Fri Jan 20, 2017 9:11 pm
by Invisible Man
chrisdermo wrote:
Eivind August wrote::hug:

"General Bananana reporting for service."
Image
The internet is fucken weird

Re: The general Bananana thread

Posted: Fri Jan 20, 2017 9:49 pm
by hotknife
Well done, as always, Eivind. Love that setup too. :love:


We need to see your toes, tho. Stop hiding them from us. :snax:

Re: The general Bananana thread

Posted: Sat Jan 21, 2017 1:48 am
by Pete
That was fantastic, Eivind! :animal: The Mandala will be the next glitch pedal I purchase. I've put off buying a Raptio, waiting for the new version to new come out, but this almost seems better than the Raptio. For starters, the ability to choose between momentary or latching, is really nice.

Re: The general Bananana thread

Posted: Sat Jan 21, 2017 4:33 am
by hotknife
Might wait until the Arp pedal comes out before I grab a Mandala (to save on shipping). The "Shooting at the Moon" is also tempting if only for the artwork.

Re: The general Bananana thread

Posted: Sun Feb 05, 2017 1:25 am
by Pete
So I got a Mandala, and it's almost really cool, except mine doesn't seem to work properly. :why:

I'll be in momentary mode, when all of a sudden it'll change to latching, or vice versa. It does this on its own, not from flicking the momentary/latching switch. It doesn't get corrected from flicking the momentary/latching switch, or from turning the pedal off or on. The only fix is to unplug the power jack and put it back in. Then like 20 seconds later of playing the pedal, the same thing will happen. The footswitch doesn't work well-Sometimes it won't turn the pedal on at all, no matter how hard/soft I press on it. Sometimes the pedal won't turn off-I step on the switch repeatedly and nothing happens. Again, the only fix is to unplug the power jack and put it back in- The pedal works normally at first, and shortly later the same problems arise. I have to take the power jack in and out constantly. The music store I bought it from included a note saying to make sure it gets 200 mA. I have it powered through a Voodoo Lab 4x4 output capable of powering pedals up to 400 mA. I tried playing the pedal through a one spot, and the same issues are present.

Re: The general Bananana thread

Posted: Sun Feb 05, 2017 1:50 am
by ALLisNOISE
Pete wrote:So I got a Mandala, and it's almost really cool, except mine doesn't seem to work properly. :why:

I'll be in momentary mode, when all of a sudden it'll change to latching, or vice versa. It does this on its own, not from flicking the momentary/latching switch. It doesn't get corrected from flicking the momentary/latching switch, or from turning the pedal off or on. The only fix is to unplug the power jack and put it back in. Then like 20 seconds later of playing the pedal, the same thing will happen. The footswitch doesn't work well-Sometimes it won't turn the pedal on at all, no matter how hard/soft I press on it. Sometimes the pedal won't turn off-I step on the switch repeatedly and nothing happens. Again, the only fix is to unplug the power jack and put it back in- The pedal works normally at first, and shortly later the same problems arise. I have to take the power jack in and out constantly. The music store I bought it from included a note saying to make sure it gets 200 mA. I have it powered through a Voodoo Lab 4x4 output capable of powering pedals up to 400 mA. I tried playing the pedal through a one spot, and the same issues are present.
You wouldn't have happened to purchase this particular pedal from Guitar Pedal Shoppe, would you have?

Re: The general Bananana thread

Posted: Sun Feb 05, 2017 3:48 am
by Pete
Yep, I did, actually

Re: The general Bananana thread

Posted: Sun Feb 05, 2017 4:17 am
by DRodriguez
This is getting interesting.

Image

What is this, a returned pedal being sold as new?

Re: The general Bananana thread

Posted: Sun Feb 05, 2017 5:25 am
by rustywire
It was already interesting tbh :snax:

Re: The general Bananana thread

Posted: Sun Feb 05, 2017 8:04 am
by Disarm D'arcy
:snax:

Re: The general Bananana thread

Posted: Sun Feb 05, 2017 11:54 am
by blakestree
ALLisNOISE wrote:
You wouldn't have happened to purchase this particular pedal from Guitar Pedal Shoppe, would you have?
Pete wrote:
Yep, I did, actually
DRodriguez wrote:
What is this, a returned pedal being sold as new?

Image