Page 3 of 3
Re: Gleeze // Fritch project
Posted: Sun Jan 01, 2017 8:15 am
by chrisdermo
Every time I come in this sub ILF tells me there's a new message in this thread, even though there isn't. Such a tease as I'm waiting for that gleeze/fritch demo
Re: Gleeze // Fritch project
Posted: Sun Jan 01, 2017 8:28 am
by odontophobia
Yeah I think this post had an edit or something, once. I had that happening for a day. I think if you mark threads as read on this forum OR mark all threads read from the main page it'll go away.
Also sorry to get your hopes up in this thread by posting again.
Re: Gleeze // Fritch project
Posted: Sun Jan 01, 2017 5:33 pm
by jrfox92
It glitches every once in a while, usually it's fixed when another comment is added.
Re: Gleeze // Fritch project
Posted: Mon Jan 02, 2017 7:34 am
by chrisdermo
Yep, fixed!
Re: Gleeze // Fritch project
Posted: Tue Jan 24, 2017 7:36 pm
by fcknoise
Whoa, that looks sick. I want it!
Re: Gleeze // Fritch project
Posted: Tue Feb 14, 2017 10:39 pm
by digi2t
Looks like you just made one of these... in a roundabout kinda way...
[youtube]http://www.youtube.com/watch?v=fMSukOHvysw[/youtube]
Mines been glue to my board since day one. Never fails to add some far out dimension to a phase.
Re: Gleeze // Fritch project
Posted: Tue Apr 25, 2017 8:55 am
by spacelordmother
Wellllll....
Re: Gleeze // Fritch project
Posted: Wed Jun 07, 2017 4:14 pm
by whoismarykelly
This project was a disaster. When I finally wired everything up a bunch of weird stuff happened. The Freeze side didn't work at all once in the box even though it worked fine after the rework. Then the Raptio had a weird thing where the hold/glitch switch wouldn't always work. Or it would switch modes after about 10 seconds of the switch being in that position. The two circuits just weren't happy in the same box. Or the extensive rework caused like a 5% functionality issue. I ripped out the guts and put them in their own boxes and sold them off to friends.
digi2t wrote:Looks like you just made one of these... in a roundabout kinda way...
[youtube]http://www.youtube.com/watch?v=fMSukOHvysw[/youtube]
Mines been glue to my board since day one. Never fails to add some far out dimension to a phase.
I have one of these actually and its cool but also there is an explosion of white noise on the stutter modes. The builder designed unnecessary gain or compression into the software. Its kind of frustrating because I love the pedal otherwise. It doesn't do the freeze stuff though.
Re: Gleeze // Fritch project
Posted: Thu Jun 08, 2017 4:40 pm
by goroth
Sucks dude! This was a rad project.
Re: Gleeze // Fritch project
Posted: Thu Jun 08, 2017 8:44 pm
by whoismarykelly
goroth wrote:Sucks dude! This was a rad project.
I wanted it to work out but now I just have a separate freeze pedal on my board with a bunch of glitch options.
Re: Gleeze // Fritch project
Posted: Fri Jun 09, 2017 1:52 pm
by Strange Tales
Too late to ask now but how much power were you feeding that thing? The EHX Freeze on it's own requires 140mA and the Spin chip for the Raptio will require some power as well. Your issues sound in line with the pedal not drawing enough.
Re: Gleeze // Fritch project
Posted: Fri Jun 09, 2017 2:33 pm
by oldangelmidnight
Glitch pedal was too glitchy?
Re: Gleeze // Fritch project
Posted: Fri Jun 09, 2017 4:06 pm
by whoismarykelly
Strange Tales wrote:Too late to ask now but how much power were you feeding that thing? The EHX Freeze on it's own requires 140mA and the Spin chip for the Raptio will require some power as well. Your issues sound in line with the pedal not drawing enough.
I considered that but I was feeding the pedal way more than enough current.