Pike Amps, pure douchery

[Jero]

So how are some people on TB justifying this guy's position? Do they think it's totally fine for him to copy the work he's being given to physically put together and box up, but then to pass the whole thing, circuit design and all, as being entirely his own original creation? I can't even begin to get my head around the levels of stupid involved in that, let alone the selfish motivations, deceptiveness and delusion at the centre of it all.

This exact thing is what I worry about when using other parties to do work for you. There are companies that will put all the boards together for your designs, etc...but who's to stop them from sharing your circuits, or stealing them downright?

[Chankgeez]

So how are some people on TB justifying this guy's position? Do they think it's totally fine for him to copy the work he's being given to physically put together and box up, but then to pass the whole thing, circuit design and all, as being entirely his own original creation? I can't even begin to get my head around the levels of stupid involved in that, let alone the selfish motivations, deceptiveness and delusion at the centre of it all.

This exact thing is what I worry about when using other parties to do work for you. There are companies that will put all the boards together for your designs, etc...but who's to stop them from sharing your circuits, or stealing them downright?

That's the thing. I think a lot of people really don't care where the products they buy come from or the ethics involved in making 'em.

I mean, look at some of the attitudes on TGP.

And speaking of TGP, look at the Klon KTR/Rockett fiasco.

[D.o.S.]

Yeah unfortunately that's the truth.

[Jwar]

Slipknot said it best

People equal shit

[behndy]

lol. they're trying to blast me a bit on TB for calling this guy a doucher.

01) like most people with their heads up their own asses, their game is WEAK.

02) only people on TB who i care what they think of me are on ILF.

03) fuck that place and it's sanctimonious bullshit.

[Jero]

Slipknot said it best

People equal shit

[youtube]http://www.youtube.com/watch?v=5sLgksAnq3k[/youtube]

[Chankgeez]

Yeah, baby, TN!!!

[behndy]

lol. i forgot how much i hate all the bullshit sucking up moderation fuckery that goes on over there.

"
Your message (3Leaf Audio Club - Episode 2) is in violation of our forum policy, and one of our staff has given you a warning. Please review our forum rules. Here is a copy of the content you posted:

doucherssss. DOUUUUUCHERRRRRS. you can't tell who i'm talking about? odd.

MY PANTIES ARE SO UNTWISTED AND FORM FITTING. LOVELY CLOSE JUBBLY HOLDERS. MAKE ME FEEL LIKE THE PRETTY LITTLE GRRL I AM.

mmmmmmmmmmm SEXY wear.

This is in violation of the following rule:
---------------------
Rule #10: No Trolling. Any member that posts in a trolling manner will not be tolerated. Trolling is defined as making inflammatory posts simply to get people riled up, while lacking in substance pertaining to the thread topic. Moderator discretion applies.
---------------------
"

[Eivind August]

No way. That's considered trolling over yonder?

[PeteeBee]

Trolling? More like panty patrolling.

You're telling me this whole thing has nothing to do with Matt pike? I just read the whole thread waiting for him to talk about his signature something or other.

[Dr. Sherman Sticks M.D.]

^

[deftones]

I'm honestly surprised at all the negative response and it's made me physically ill this morning so I'm gonna try my best to clear everything up.

The reason for the new company is to try some different ideas with branding. I wanted a brand that's just for bass players without any ambiguity. I was also getting really burned out and I needed a new creative outlet. It has nothing to do with "keeping the 3Leaf Audio name out of the muck" as there is no threat of legal action here. I'm not infringing on any trademarks and I didn't break any contracts. I'll still be running the 3Leaf brand, and that will be focused on all the fun and weird stuff I've always made, while Pike will be more utilitarian products for bass.

As to why the pedals look similar to the old USA-made DG pedals: Doug and I had a partnership and I designed those pedals. He came to me with the schematic for the audio section of the circuits, and I designed the bypass switching and did the physical designs. I also fronted the money for every production run and managed the entire production myself. I don't think most people realize how collaborative that partnership was...I wasn't just a hired gun if that was the impression that was given off. I won't get into the ending of that partnership other than to say that Darkglass stuck me with a few hundred enclosures that were already drilled for those pedals. I couldn't afford to just throw those away since I had already paid for them, so I had to come up with a design that would work in that box. I was originally thinking of making it a limited run just to get rid of the few hundred enclosures I had, but then Darkglass changed the look of their pedals to the point that my aesthetic design was no longer there, and it was a design I was really proud of so I wanted to 'reclaim' it so to speak. I obsess over the look and feel of the products I design and I didn't want to see my work die out with the end of that partnership.

Regarding the circuit: I wouldn't have done any of this if I were just going to copy Darkglass. I don't think it's fair to my customers to release a product that doesn't bring anything new to the table. The Vulcan circuit is inspired by my knowledge of the Darkglass circuits but taken in a direction that I think makes them appealing in a totally different way. I worked with those circuits for years so I learned what makes them sound good, but I also found lots of ways to change it to make it work more to my taste. The big difference with the Vulcan circuit is that it's actually two entire overdrive circuits in parallel that get blended together to form the complete sound. It's a very complex circuit design...the Vulcan circuit has 117 components and the XL has 173. In practice it sounds a lot different than a B3K or something like that, so I hope you guys get the chance to try one for yourself before just assuming that it's a ripoff since it has a similar look. I've spent most of the last year fine-tuning and obsessing over every detail of these pedals and I'm really excited about the results.

Sorry to be long-winded, but I needed to be thorough because all the speculation on here gave me an anxiety attack. It really wasn't my intent to ruffle any feathers. I'm currently putting the finishing touches on a series of onboard preamps with a really cool twist, and I think you guys will like them.

Pathetic, look how defensive and guilty he is. What a sack of shit and even worse is the TB crowd.

[D.o.S.]

Welcome to ILF!

[SmallEQ]

yeah. he worked for Dougy building his pedals, then put out a nigh identical looking and sounding copy of current pedals he sells.

not just taking an available circuit.

he's a dick bag. a bag of dicks. a bag MADE of dicks.

So if I'm reading all this right, the guy is hired to do the physical work -presumably because of his available resources at his own business- but then copies the pcb's he's being given, and drops them into his own "pike amp" boxes as a side line?

No.

[behndy]

I'm honestly surprised at all the negative response and it's made me physically ill this morning so I'm gonna try my best to clear everything up.

The reason for the new company is to try some different ideas with branding. I wanted a brand that's just for bass players without any ambiguity. I was also getting really burned out and I needed a new creative outlet. It has nothing to do with "keeping the 3Leaf Audio name out of the muck" as there is no threat of legal action here. I'm not infringing on any trademarks and I didn't break any contracts. I'll still be running the 3Leaf brand, and that will be focused on all the fun and weird stuff I've always made, while Pike will be more utilitarian products for bass.

As to why the pedals look similar to the old USA-made DG pedals: Doug and I had a partnership and I designed those pedals. He came to me with the schematic for the audio section of the circuits, and I designed the bypass switching and did the physical designs. I also fronted the money for every production run and managed the entire production myself. I don't think most people realize how collaborative that partnership was...I wasn't just a hired gun if that was the impression that was given off. I won't get into the ending of that partnership other than to say that Darkglass stuck me with a few hundred enclosures that were already drilled for those pedals. I couldn't afford to just throw those away since I had already paid for them, so I had to come up with a design that would work in that box. I was originally thinking of making it a limited run just to get rid of the few hundred enclosures I had, but then Darkglass changed the look of their pedals to the point that my aesthetic design was no longer there, and it was a design I was really proud of so I wanted to 'reclaim' it so to speak. I obsess over the look and feel of the products I design and I didn't want to see my work die out with the end of that partnership.

Regarding the circuit: I wouldn't have done any of this if I were just going to copy Darkglass. I don't think it's fair to my customers to release a product that doesn't bring anything new to the table. The Vulcan circuit is inspired by my knowledge of the Darkglass circuits but taken in a direction that I think makes them appealing in a totally different way. I worked with those circuits for years so I learned what makes them sound good, but I also found lots of ways to change it to make it work more to my taste. The big difference with the Vulcan circuit is that it's actually two entire overdrive circuits in parallel that get blended together to form the complete sound. It's a very complex circuit design...the Vulcan circuit has 117 components and the XL has 173. In practice it sounds a lot different than a B3K or something like that, so I hope you guys get the chance to try one for yourself before just assuming that it's a ripoff since it has a similar look. I've spent most of the last year fine-tuning and obsessing over every detail of these pedals and I'm really excited about the results.

Sorry to be long-winded, but I needed to be thorough because all the speculation on here gave me an anxiety attack. It really wasn't my intent to ruffle any feathers. I'm currently putting the finishing touches on a series of onboard preamps with a really cool twist, and I think you guys will like them.

Pathetic, look how defensive and guilty he is. What a sack of shit and even worse is the TB crowd.

your screen name makes me sad. i played with Deftones in a band i was in in High School a bunch of times before they blew up. and then a year or two ago played a show with this way too young band, bass player looked familiar, had a beat up cab with DEFTONES STAGE LEFT written on it.

was Chi's kid.

played with him when he was a few years older than me, then played with HIS FUCKING SON.

ugh.