Page 3 of 4
Re: Penny Pedals 'Digital Pulse' PWM Bit Sweeper
Posted: Mon Jul 06, 2015 9:00 pm
by blankfield
Magnificent!
Re: Penny Pedals 'Digital Pulse' PWM Bit Sweeper
Posted: Tue Jul 07, 2015 5:24 am
by ThorZ
I have no use for this what so ever.
Which means i want it more than ever
Re: Penny Pedals 'Digital Pulse' PWM Bit Sweeper
Posted: Fri Jul 17, 2015 9:57 pm
by TweedBassman
release date Friday, 7-24-15.
Intro ILF brodown lowprice $139. (reg price $179, this thing is expensive to make!) US shipping is free, international $30 via USPS priority.
First run of 10 will be 'large heart' graphics shown, next ten and future runs will have 3 smaller hearts across the middle (full, half, empty heart meter) and the switches will be under the knobs.
I have had MANY requests for this thing so don't blow it. The next batch will have a couple weeks wait.
What is it? It's a fuzzy pulse width modulator that does straight up old school video game sounds (not a transistor fuzz that sorts sounds like a video game, this actually does a pseudo analog to digital conversion in a lofi bitcrush type way) but also has an onboard optical (vactrol) LFO, that can do square chop or smooth sine sweeps between the highest bit rate and whatever you set as the bit low point. The result is low sweeping phaser-like bit sweeps, or stuttering bitcrunching and all sorts of synth goodness. Most settings work well on the higher notes on a guitar too, and it has plenty of sustain, so you really have a great "synth engine" to run into your other effects.
Controls: switch 1: LFO wave control (square, soft triangle, sine), switch 2: tone filter (flat, bright, deep).
Knobs: Bit depth, LFO depth, LFO speed, Volume.
By carefully tuning the knobs this thing can get a million sounds. Straight old school 8bit sounds can be had by selecting sine wave LFO and turning the speed and depth all the way up; same setting on square wave yields an 8 bit ring mod. back off the speed a hair and it's a hummingbird trem-u-bit. just a billion things to do with it.

Re: Penny Pedals 'Digital Pulse' PWM Bit Sweeper
Posted: Fri Jul 17, 2015 10:03 pm
by DRodriguez
I want one! PM'd!!edit: or am I being dumb and I can't actually try and buy this until next friday.

Re: Penny Pedals 'Digital Pulse' PWM Bit Sweeper
Posted: Fri Jul 24, 2015 12:12 pm
by blankfield
Aww yiss, muthafuckin release day.
Re: Penny Pedals 'Digital Pulse' PWM Bit Sweeper
Posted: Fri Jul 24, 2015 2:42 pm
by Tristan
Is it possible to get one with an expression input for the LFO / that cancels the internal LFO so I can use my Goatkeeper 3 with it?
Re: Penny Pedals 'Digital Pulse' PWM Bit Sweeper
Posted: Fri Jul 24, 2015 11:21 pm
by TweedBassman
Tristan wrote:Is it possible to get one with an expression input for the LFO / that cancels the internal LFO so I can use my Goatkeeper 3 with it?
not yet. this one is just too small inside, i tried to cram one in there for ya but no go.
there should be more room on the next batch.
as for this batch....
IT'S A GO!
There will be a video up tomorrow night with the highlights of all the controls and sounds. Orders are being taken for the first 10 (some are spoken for already) which will ship out Wednesday of next week. If you would like one, send an email to
pennypedalsfx@gmail.com or send over a PM here. Then, I will write you back and forward an invoice for payment. Note, if you email or PM tonight or tomorrow (Saturday) I will not get back to you until tomorrow night; no worries just hang tight.
who's pumped?

Re: Penny Pedals 'Digital Pulse' PWM Bit Sweeper
Posted: Sat Aug 01, 2015 5:42 pm
by TweedBassman
Full, albeit low volume and mediocre, demo:
[youtube]http://www.youtube.com/watch?v=P-Uw8xkX9yU[/youtube]
I will be editing the demo with subtitles to explain what the hell is going on in the clips.
everyone who contacted for a pre-order will be sent payment info TONIGHT so hang tight!
Anyone else wants in before this batch is gone better hurry, only a couple left. word.
Re: Penny Pedals 'Digital Pulse' PWM Bit Sweeper
Posted: Sat Aug 01, 2015 5:55 pm
by Chankgeez
Sounds nicely nasty.

Re: Penny Pedals 'Digital Pulse' PWM Bit Sweeper
Posted: Sat Aug 01, 2015 6:07 pm
by TweedBassman
oh and to increase the sexy, I changed the switch layout from barely reachable at the top to fully usable under the knobs.

Re: Penny Pedals 'Digital Pulse' PWM Bit Sweeper
Posted: Sat Aug 01, 2015 7:24 pm
by blankfield
Yes and yes!
Re: Penny Pedals 'Digital Pulse' PWM Bit Sweeper
Posted: Mon Aug 24, 2015 3:46 pm
by DRodriguez
Just got mine, this thing is really fun to mess around with. I' only got to play with it a little bit because I'm at work, but I'll give it a full rundown in the coming days.
Only thing to note is that the tone switch and the LFO mode switch are reversed on mine vs what the instruction sheet says. So my LFO mode is on the left, and the tone is on the right.
Re: Penny Pedals 'Digital Pulse' PWM Bit Sweeper
Posted: Thu Aug 27, 2015 7:00 am
by DRodriguez
Not a demo, but I couldn't sleep last night and this is the result. The Digital pulse is used on the high synth line constantly in the bg (comes in around 0:08). Really gives it some character. The three guitar tracks are all live takes/improvisations, so excuse timing issues and flubs.
[soundcloud]https://soundcloud.com/drod91/nimbus-rough[/soundcloud]
I recommend checking out the sound around 2:48. This pedal can get really glitchy if you ride the input volume a play with the gate
Re: Penny Pedals 'Digital Pulse' PWM Bit Sweeper
Posted: Thu Aug 27, 2015 1:00 pm
by UglyCasanova
Oh yeah. Fuck yeah! Dope stuff, DRodriguez!

Re: Penny Pedals 'Digital Pulse' PWM Bit Sweeper
Posted: Fri Aug 28, 2015 11:02 pm
by TweedBassman
DRodriguez that sounds siiiick great work! wish i lived in Brooklyn sounds like my kinda stuff.
You are right the switches are swapped in the manual. They are correct on the pedal just reversed the ol' L and R in writing. my bad.
Those responsible for the sacking have been sacked.