Re: marr jag
Posted: Fri Aug 15, 2014 5:54 pm
Thought of you immediately, Psyre...
Page 3 of 4
Re: marr jag
Posted: Fri Aug 22, 2014 3:55 pm
Johnny is a small man.
Re: marr jag
Posted: Fri Aug 22, 2014 3:57 pm
Too bad this isn't a Jazzmaster.
Re: marr jag
Posted: Fri Aug 22, 2014 5:26 pm
fuck.
sherwood.
fuuuuuuuuuuck.
sherwood.
fuuuuuuuuuuck.
Re: marr jag
Posted: Fri Aug 22, 2014 10:34 pm
No fucking joke…I don't understand the way Fender is managing that product…make some dope colors…do em LTD even…Holy Schnikes wrote:Too bad this isn't a Jazzmaster.
Re: marr jag
Posted: Fri Sep 05, 2014 12:47 pm
I like the Marr Jaguar.
Im going to wire my Kurt Cobain Jaguar like the Marr Jag, but with humbuckers and add coil tapping.
Im going to wire my Kurt Cobain Jaguar like the Marr Jag, but with humbuckers and add coil tapping.
Re: marr jag
Posted: Mon Feb 09, 2015 11:07 pm
i'm having a hum/buzz issue when i press down the trem arm.
it sounds like the typical single coil buzz.
but.
it stops when i touch my foot to anything metal on my pedalboard!? like a pedals foot switch.
i plugged straight into my amp. and press down the trem arm .. the buzz is still there.
so. it seems like some kind of shielding issue with the guitar/ pickups/ trem arm cavity.
any help?
it sounds like the typical single coil buzz.
but.
it stops when i touch my foot to anything metal on my pedalboard!? like a pedals foot switch.
i plugged straight into my amp. and press down the trem arm .. the buzz is still there.
so. it seems like some kind of shielding issue with the guitar/ pickups/ trem arm cavity.
any help?
Re: marr jag
Posted: Tue Feb 10, 2015 8:04 am
It sounds like maybe the bridge ground wire is coming loose when you use the trem. That's where I would start anyway.
Re: marr jag
Posted: Tue Feb 10, 2015 10:47 am
thanks MEC! going to check it when i get homeMEC wrote:It sounds like maybe the bridge ground wire is coming loose when you use the trem. That's where I would start anyway.
Re: marr jag
Posted: Tue Feb 10, 2015 7:09 pm
You can use copper shielding tape and tape the ground wire to the bottom of the bridge
and then screw it back down. That should keep it from moving around when you wang out.
and then screw it back down. That should keep it from moving around when you wang out.
Re: marr jag
Posted: Wed Feb 11, 2015 4:32 pm
i'll try it .. on the Guitar tooMEC wrote:That should keep it from moving around when you wang out.
Re: marr jag
Posted: Fri Feb 13, 2015 7:54 pm
Allegedly, there were only 200 sherwood green Marr jaguars available worldwide. Here's mine
Because just one isn't enough
Because just one isn't enough
Re: marr jag
Posted: Fri Feb 13, 2015 8:02 pm
Dude.
Re: marr jag
Posted: Fri Feb 13, 2015 8:14 pm
Ive always liked the Olympic white ones.
If they would make a black and turquoise one, I would sell my kidney for it.
However, I'm totally envying you.
If they would make a black and turquoise one, I would sell my kidney for it.
However, I'm totally envying you.
Re: marr jag
Posted: Tue Feb 17, 2015 4:15 pm
lost a Bridge screw whilst inspecting things 
so. gotta fix that.
which reminds me.
i really like the Mastery bridge i put on a tele!
it's a new guitar now
i've thought about putting a Mastery on the Jagmarr. But ..
they're not cheap.
and. i can tell it will really change the sound of the Jag.
( take away some of the plinky jag magic
)
the bridge on the Jagmarr is good. but. it's just a mustang bridge with staytrem bushings.
the mastery would feel - more solid.
has anyone put a Mastery on a Jag?
likes/ dislikes ?
so. gotta fix that.
which reminds me.
i really like the Mastery bridge i put on a tele!
it's a new guitar now
i've thought about putting a Mastery on the Jagmarr. But ..
they're not cheap.
and. i can tell it will really change the sound of the Jag.
( take away some of the plinky jag magic
)the bridge on the Jagmarr is good. but. it's just a mustang bridge with staytrem bushings.
the mastery would feel - more solid.
has anyone put a Mastery on a Jag?
likes/ dislikes ?