Page 191 of 323
Re: Sunday GAS Party(pressure treated or cedar?)
Posted: Wed Apr 29, 2015 1:07 pm
by Strange Tales
Probably, I'm not as well versed on the Judder as I should be considering how high it is on my GAS list. The demo of the new one didn't exactly gird my loins though. Will still pick one up and if it ends up doing what I want I'll dump the Raptio. No idea when it'll actually be available though.
Re: Sunday GAS Party(pressure treated or cedar?)
Posted: Wed Apr 29, 2015 1:09 pm
by neonblack
Yeah, they aren't great about updates. Makes it hard to plan for a purchase.
Re: Sunday GAS Party(pressure treated or cedar?)
Posted: Wed Apr 29, 2015 9:58 pm
by Strange Tales
Stupid question, but this black goop stuff is glue right? Cause if so, dude fucking gooped the goddamn PCB to the pedal and I can't see where the footswitch is wired in at.
Re: Sunday GAS Party(pressure treated or cedar?)
Posted: Wed Apr 29, 2015 10:07 pm
by neonblack
Basically yeah. If you try to remove it you run the risk of fucking the pedal up.
However some of the craftier fellows around here might know how to fix it.
Re: Sunday GAS Party(pressure treated or cedar?)
Posted: Wed Apr 29, 2015 10:30 pm
by ryan summit
uh oh
gooped into a mod corner
Re: Sunday GAS Party(pressure treated or cedar?)
Posted: Wed Apr 29, 2015 11:19 pm
by Inconuucl
Superego+Goatkeeper or Superego+Possessed, depends on how controlled you want the glitching to be.
Re: Sunday GAS Party(pressure treated or cedar?)
Posted: Thu Apr 30, 2015 8:37 am
by Strange Tales
Can the Superego just do quick bursts? I really like being able to constantly alternate between my signal and a full wet Raptio in half second bursts.
Also really thinking of using my Sonic Crayon savings fund to buy a Seppuku EcoMod, I don't know what to do anymore it's like Strange Tales Top Wants Explosion 2k15.
Re: Sunday GAS Party(pressure treated or cedar?)
Posted: Thu Apr 30, 2015 9:36 am
by Inconuucl
Yeah, it has a speed knob for that. It won't sound the same, mind you, as it's a different method to get the glitching, but it sounds better IMHO.
Re: Sunday GAS Party(pressure treated or cedar?)
Posted: Thu Apr 30, 2015 9:41 am
by Strange Tales
Hm, maybe in the future if someone wants to let me try theirs I'll have to give it a whirl to see if I like it more. I really love the Raptio for this super specific function, but it's sort of worthless outside of that
Re: Sunday GAS Party(pressure treated or cedar?)
Posted: Thu Apr 30, 2015 10:06 am
by Inconuucl
Any choppy trem will do the trick too.
Re: Sunday GAS Party(pressure treated or cedar?)
Posted: Sat May 02, 2015 2:24 pm
by UglyCasanova
Yummy!
[youtube]http://www.youtube.com/watch?v=EMlapw0XMf4[/youtube]
Re: Sunday GAS Party(pressure treated or cedar?)
Posted: Sat May 02, 2015 2:51 pm
by Uncle Grandfather
All it's missing is the Sound on Sound of the EP-3 and I'd be all over this.
Re: Sunday GAS Party(pressure treated or cedar?)
Posted: Sat May 02, 2015 3:02 pm
by coldbrightsunlight
Man, that sounds super great.
Really miss having a tape echo sometimes, maybe I shouldn't have sold mine...
Re: Sunday GAS Party(pressure treated or cedar?)
Posted: Sat May 02, 2015 8:26 pm
by Jwar
Strange Tales wrote:Stupid question, but this black goop stuff is glue right? Cause if so, dude fucking gooped the goddamn PCB to the pedal and I can't see where the footswitch is wired in at.
I took a razor blade and cut it on the Rapito. No issue. That goop isn't very strong. Just be a bit careful and you'll be fine.
Re: Sunday GAS Party(pressure treated or cedar?)
Posted: Sat May 02, 2015 10:04 pm
by Strange Tales
I've already sold the Raptio so it's not that big of an issue for me any more
. Honestly the DD-6 warp is close enough for me, and I think I'll try the Superego Latch while running shit through it. In the end, I think I'll be happier with the Judder whenever I get that.