Page 1732 of 2752
Re: Let's see your PEDAL BOARD!
Posted: Fri Feb 27, 2015 11:41 pm
by Jwar
Thanks dude! I'm ashamed to admit this, but it changed already! HAHAHAHAHAHAHAHAHA
I pulled the RM1 and am doing a temp/permanent trade because of the fact that it's clearly not digging my other stuff for whatever reason. So weird, but I tried it with two of them (I have Excane's) and same results. So it's probably if I had to guess the Echoczar. Dunno why, but what can I do? lol
So I put the ILFDD in it's place and took the grind fuzz off and put the Magnetar back on. It's sooooooooooo good. I can't get rid of it.
Plus I have a few smaller footprint pedals coming that I may want to squeeze or I may just get a Grande or custom board. I like having them spaced out like this. It was so much easier playing today.
Re: Let's see your PEDAL BOARD!
Posted: Sat Feb 28, 2015 1:15 am
by OddKnowledge
I need S p a c e. I don't trust myself to hit the correct switch on a cramped board while I'm rocking out.
Re: Let's see your PEDAL BOARD!
Posted: Sat Feb 28, 2015 2:39 am
by Hyphen Nation
jwar wrote:I also removed 3 pedals to space them out and hope that the noise issue is gone. If it's not, I will lose my mind and sell all my pedals and smash my bass with a sledge hammer.


Dude, so sex. So dope. So delay. So BILF.
Tell me about that Echoczar…or maybe don't…
Re: Let's see your PEDAL BOARD!
Posted: Sat Feb 28, 2015 7:44 am
by Invisible Man
hbombgraphics wrote:holy crap
that is sick
once again top mounted jacks make everything more awesome!!!!
How hard was it to sync everything up?
Keep in mind I am Midi Challenged
Top mount jacks FTW.
Not hard to sync; had to send the Boomerang in for an update so that it accepts MIDI clock, though. I run that Tempode into a 4-way splitter (under the riser next to the power brick), and then run a cable to each of the MIDI-enabled pedals. They all read clock pulses automatically, so there's no programming. That'd be too complicated for me!
Re: Let's see your PEDAL BOARD!
Posted: Sat Feb 28, 2015 7:59 am
by pgallagher716
jwar wrote:pgallagher716 wrote:jwar wrote:
One sexy board. Can't wait to hear all those Chumbawamba covers.
Wait...I don't get it. LOL
With those sweet, sweet pedals I was trying to think of the last possible band on earth they would be used to cover. I could of easily of said Kajagoogoo.
Re: Let's see your PEDAL BOARD!
Posted: Sat Feb 28, 2015 10:43 am
by RumoRazzi
Work in progress...
Re: Let's see your PEDAL BOARD!
Posted: Sat Feb 28, 2015 11:46 am
by tuj
I worked really hard to get to this.
TIMMY!
Fuzz hugger Magic Meter
Blackout Effectors Seriously Special Twosome
EHX Freeze
Wilson Freaker wah
WMD Super Fatman
Fuzzhugger Algal Bloom
Mooer Mod Factory
Malekko Phase
Mooer Trelicopter
Mooer Baby Tuner
Mooer Pro Reecho
2x Joyo Power Supply 2 isolated supplies under the shelf.

Fender MIJ Jag-stang and Rondo Tele into Fender SF Champ.
Re: Let's see your PEDAL BOARD!
Posted: Sat Feb 28, 2015 11:47 am
by skullservant
You guys are making me gas for a holey board
Re: Let's see your PEDAL BOARD!
Posted: Sat Feb 28, 2015 12:13 pm
by doommeow
tuj wrote:I worked really hard to get to this.
TIMMY!
Fuzz hugger Magic Meter
Blackout Effectors Seriously Special Twosome
EHX Freeze
Wilson Freaker wah
WMD Super Fatman
Fuzzhugger Algal Bloom
Mooer Mod Factory
Malekko Phase
Mooer Trelicopter
Mooer Baby Tuner
Mooer Pro Reecho
2x Joyo Power Supply 2 isolated supplies under the shelf.

Fender MIJ Jag-stang and Rondo Tele into Fender SF Champ.
How's the Mooer Pro? Especially interested in any comparisons to the Echo Park / Echo Machine....
Re: Let's see your PEDAL BOARD!
Posted: Sat Feb 28, 2015 12:15 pm
by odontophobia
skullservant wrote:You guys are making me gas for a holey board
If you had a Holey Board what would you do with all the free velcro from B/S/T?
Re: Let's see your PEDAL BOARD!
Posted: Sat Feb 28, 2015 12:43 pm
by Jero
I would have to buy vast quantities of zipties
Re: Let's see your PEDAL BOARD!
Posted: Sat Feb 28, 2015 12:58 pm
by hbombgraphics
I love zip ties. Still don't understand though how you hold down things like a whammy of volume with a holey
Re: Let's see your PEDAL BOARD!
Posted: Sat Feb 28, 2015 1:08 pm
by tuj
If you use thin zip ties the treadle pedal travel isn't affected at all.
The Mooer Pro is really cool I scored it new for $130 so you can't beat that. I liked the first Mooer Reecho so I gave the pro a try. It's perfect for me.
Re: Let's see your PEDAL BOARD!
Posted: Sat Feb 28, 2015 3:18 pm
by PeteeBee
odontophobia wrote:skullservant wrote:You guys are making me gas for a holey board
If you had a Holey Board what would you do with all the free velcro from B/S/T?
Quoted because

Re: Let's see your PEDAL BOARD!
Posted: Sat Feb 28, 2015 3:25 pm
by Sparrow
i got really tired of my core x2 cable cutting out/ having a weak sketchy signal.
so i got a new cable. NE cable co. cable. i little more stiff than the core. and the Evidence audio.
but. Well made. i got some patch cables too. for .. MORE Pedals


i want to fill up the top row a bit more
but. this order works Really well for me. everything plays nice and stacks well.
Elements into Improbability Drive .. makes the ID get Octave Glitches in really Crazy ways
TAFM is prbly the best at the End of the chain Fuzz i've used.
the clean volume/ fuzz volume blend knobs let you set it a lot of different ways.
EP boost at the end .. for that TGP swag!
but. i do like it to make things FAT. mostly - when playing clean.
and. it does make delay and verb "pop" a bit more.
i don't care for the mid bump it has though. and i would like something similar in it's spot. but. it's cheap. and Good.