Re: TGD Build! Ask yo motherfuckin' questions here!
Posted: Mon Nov 26, 2012 4:45 pm
Ausome
Page 17 of 17
Re: TGD Build! Ask yo motherfuckin' questions here!
Posted: Thu Dec 20, 2012 11:46 pm
Ok question for you- I've got the kit here, the board has a total of 16 pins, but my chip is 14 pins, leaving two empty. So which way do I orient the chip?
Re: TGD Build! Ask yo motherfuckin' questions here!
Posted: Fri Dec 21, 2012 10:53 pm
the IC? sounds like you got the wrong one
Re: TGD Build! Ask yo motherfuckin' questions here!
Posted: Fri Dec 21, 2012 11:06 pm
Yeah. I sorted it out with Aen a little earlier today! It's all built up waiting for the new chip!
Re: TGD Build! Ask yo motherfuckin' questions here!
Posted: Sun Jan 20, 2013 3:00 pm
Im having some of the same problems as other people. I have never done anything like this, and haven't even used a soldering iron before so its all really sloppy. It will bypass fine, but when I turn it on it hisses, and does the helicopter noise. And to be clear pretty much no guitar sound comes through. Here is a pic.
I have triple checked to make sure no wires were touching each other or the enclosure, and I have tried re-soldering everything. So here is a video of the pedal in action.
http://youtu.be/Vf0w_3QQ8ss
oh yeah and the LED doesn't work but I don't care about that
I have triple checked to make sure no wires were touching each other or the enclosure, and I have tried re-soldering everything. So here is a video of the pedal in action.
http://youtu.be/Vf0w_3QQ8ss
oh yeah and the LED doesn't work but I don't care about that
Re: TGD Build! Ask yo motherfuckin' questions here!
Posted: Sun Jan 27, 2013 2:59 pm
Just compared my wiring to yours and it looks wired fine. Maybe your joints are cold. I'd definitely redo the in and out jacks. Looks like the wire is quite exposed.