Page 14 of 45
Re: Pest Tattern: It's What's Happening
Posted: Mon Aug 31, 2020 5:02 am
by ALLisNOISE
Jero wrote:One of these is randomly going to have NOS parts in it. Just cause.
Just for the sacrilege

Re: Pest Tattern: It's What's Happening
Posted: Mon Aug 31, 2020 5:09 am
by fcknoise
this is the noise i need to have brought to my life
Re: Pest Tattern: It's What's Happening
Posted: Mon Aug 31, 2020 9:15 am
by Jero
Should I toss a handful of random resistors together and haphazardly place them on the bias, so everyone's is different?

Re: Pest Tattern: It's What's Happening
Posted: Mon Aug 31, 2020 9:54 am
by oldangelmidnight
You could just hide a trimpot in there somewhere and set every one a little different.
Re: Pest Tattern: It's What's Happening
Posted: Mon Aug 31, 2020 9:57 am
by BetterOffShred
It has a starve pot ..
Re: Pest Tattern: It's What's Happening
Posted: Mon Aug 31, 2020 5:33 pm
by Eivind August
Jero wrote:Should I toss a handful of random resistors together and haphazardly place them on the bias, so everyone's is different?


Re: Pest Tattern: It's What's Happening
Posted: Mon Aug 31, 2020 7:38 pm
by Jero
Big box of parts arrived today! Enclosures most importantly.
Going to start drilling them tonight
Re: Pest Tattern: It's What's Happening
Posted: Mon Aug 31, 2020 8:08 pm
by BetterOffShred
Hell yeah man. This is great. Glad this all came together! Are you using MPSA18s or some of the other usual suspects like BC550 or 5088/89?
Re: Pest Tattern: It's What's Happening
Posted: Mon Aug 31, 2020 8:35 pm
by Dandolin
Re: Pest Tattern: It's What's Happening
Posted: Mon Aug 31, 2020 9:14 pm
by Jero
Meant to post this before...
[youtube]http://www.youtube.com/watch?v=GuRK1bA9hcQ[/youtube]
BetterOffShred wrote:Hell yeah man. This is great. Glad this all came together! Are you using MPSA18s or some of the other usual suspects like BC550 or 5088/89?
Mpsa18 all the way. Still not 100% which I want to use for the pnp's though.
Re: Pest Tattern: It's What's Happening
Posted: Mon Aug 31, 2020 9:27 pm
by AZX309
Eivind August wrote:Jero wrote:Just so you all know...there's a VERY good reason Evan just made an appearance...
This is turning into the ILF Cinematic Universe, and I am loving it.

We all have ridiculously expensive CGI facial hair.
Re: Pest Tattern: It's What's Happening
Posted: Mon Aug 31, 2020 10:02 pm
by Chankgeez
Re: Pest Tattern: It's What's Happening
Posted: Mon Aug 31, 2020 10:29 pm
by MaxMaps
This thread is amazing.
That is all
Re: Pest Tattern: It's What's Happening
Posted: Mon Aug 31, 2020 10:58 pm
by BetterOffShred
Jero wrote:Meant to post this before...
[youtube]http://www.youtube.com/watch?v=GuRK1bA9hcQ[/youtube]
BetterOffShred wrote:Hell yeah man. This is great. Glad this all came together! Are you using MPSA18s or some of the other usual suspects like BC550 or 5088/89?
Mpsa18 all the way. Still not 100% which I want to use for the pnp's though.
Looks rad. I didn't like 3905s nearly as much as the 2907s.. I tried a couple other things like 5087 and 4403, everything over about 250 hfe sounded the same to me.. I even tried some mp42b

Re: Pest Tattern: It's What's Happening
Posted: Tue Sep 01, 2020 12:46 am
by Jero
2907's are what I preferred in the breadboard
