Page 11 of 17
Re: TGD Build! Ask yo motherfuckin' questions here!
Posted: Fri Aug 03, 2012 4:11 pm
by MrMurderMittens
I want to put an analog VU meter on my pedals voltage sag/starve pot. Need help!
Re: TGD Build! Ask yo motherfuckin' questions here!
Posted: Fri Aug 03, 2012 11:57 pm
by MrMurderMittens
lance_r88 wrote:wait wait wait...got er workin'! Had to get it in the enclosure and it came alive!
Im having the same problem. Except mine is in the enclosure. I thought I might have damaged the guts some how, so I re-ordered a new board,res,caps, chip and socket(thanks Ben and Louise!). But I am getting the same results.
Sad face
All you did was place everything inside the enclosure and it worked?
Re: TGD Build! Ask yo motherfuckin' questions here!
Posted: Sun Sep 23, 2012 9:30 am
by jellyfishfuzz
wooooo for fuzz. Hey this is my first build and its freakin awesome. but i did put one of the capasitor on wrong and tried to desolder it and the pcb hole is full of solder and cant get it out. Thanks. aaaaaaaaaaahhhhhhhhhhhhhhhhhhhh
Re: TGD Build! Ask yo motherfuckin' questions here!
Posted: Sun Sep 23, 2012 8:03 pm
by jellyfishfuzz
I was trying to get the desolder out and fuck the solder pads came off both. Is there anything i can do or is it just fucked.
Re: TGD Build! Ask yo motherfuckin' questions here!
Posted: Mon Sep 24, 2012 10:00 pm
by jellyfishfuzz
Fixed it by following the pcb to the next wire. Very easy. This pedal is the craziest shit ever. Its nuts. Fuzzy Nuts.
Re: TGD Build! Ask yo motherfuckin' questions here!
Posted: Tue Sep 25, 2012 3:13 pm
by hbombgraphics
Just ordered one of these and super stoked about the build
Couldn't help but notice that they are all oriented sideways
any chance they can be oriented vertically with top mount jacks?
Re: TGD Build! Ask yo motherfuckin' questions here!
Posted: Tue Sep 25, 2012 3:23 pm
by Officer Bukowski
hbombgraphics wrote:Just ordered one of these and super stoked about the build
Couldn't help but notice that they are all oriented sideways
any chance they can be oriented vertically with top mount jacks?
You could do that no problem. You could even put it in a 125b with top jacks.
Do you have anything to drill a blank enclosure with?
Re: TGD Build! Ask yo motherfuckin' questions here!
Posted: Tue Sep 25, 2012 3:25 pm
by hbombgraphics
Officer Bukowski wrote:hbombgraphics wrote:Just ordered one of these and super stoked about the build
Couldn't help but notice that they are all oriented sideways
any chance they can be oriented vertically with top mount jacks?
You could do that no problem. You could even put it in a 125b with top jacks.
Do you have anything to drill a blank enclosure with?
yeah drilling shouldn't be an issue
was just wondering if their was a reason that people weren't doing that
Re: TGD Build! Ask yo motherfuckin' questions here!
Posted: Tue Sep 25, 2012 3:38 pm
by Officer Bukowski
Probably just because it comes with a predrilled enclosure.
If you've got a little step drill bit you're set.
Re: TGD Build! Ask yo motherfuckin' questions here!
Posted: Tue Sep 25, 2012 5:44 pm
by fuzzmax
here is my build......top left.
Re: TGD Build! Ask yo motherfuckin' questions here!
Posted: Tue Sep 25, 2012 6:33 pm
by hbombgraphics
that is so good dude
Re: TGD Build! Ask yo motherfuckin' questions here!
Posted: Wed Sep 26, 2012 1:36 pm
by sp3k
nice! can i borrow that graphic?
Re: TGD Build! Ask yo motherfuckin' questions here!
Posted: Sat Sep 29, 2012 2:26 pm
by fuzzmax
Aen sent me two of these....you want the other??
Re: TGD Build! Ask yo motherfuckin' questions here!
Posted: Mon Oct 01, 2012 10:18 am
by sp3k
If you could scan it i would appreciate it! I'm in portugal...
Re: TGD Build! Ask yo motherfuckin' questions here!
Posted: Wed Oct 03, 2012 10:48 pm
by aens_wife
I can just send the original art work if that would be helpful... Send me an email address if you still want it.