ilovefuzz.com

Are the 2hp modules shallow enough for the Pods? I figured they would be too deep, but I have no experience with them.

greyscales wrote:Are the 2hp modules shallow enough for the Pods? I figured they would be too deep, but I have no experience with them.

They might be but so would the Zadar I think. I'll most likelyuse some kind of washer or raisers to fake a deeper case. I could even use wood pannels, silicon or whatever to put between the actual railings and the modules and screw right through them. I'd figure something ou trust me might look weird as fuck but would be functional. Hell I could even unscrew the whole power supply and build a deeper wood case. Putting like 3-5 washers between each modules and the rails would probably work too.

That look like a functional setup ? Anything I would be missing or should replace?

True but that does’nt cover using guitar/ line level signals for fm etc.

I could also always buy a hungry robot modular output module ? Maybe a desktop mixer to boost signal back up to go the other way (back to modular) ?

Hungry robot is something I am very interested in too!

I was already going insane after like 2 days because I couldn't stop thinking about how to maximize space so I've just ordered a powered pod32. That gives me 92hp, which I AM NOT GOING FOR MORE, I AM NOT GOING FOR MORE, I AM....

Now I think (probably not) I can relax a bit and stop worrying so much about space and just wait for my modules to arrive and build this slowly without overthinking this too much. Again, probably not...

vidret wrote:To be honest, the only way to know is to get it and play with it.

But if you want to play with levels and instruments get a swestopol.

Just getting some stuff (but not like 11 million things at once) is the best way to learn, for sure. And as you'll do that you'll think, oh I need xyz.

vidret wrote:

JTurbide wrote:I was already going insane after like 2 days because I couldn't stop thinking about how to maximize space so I've just ordered a powered pod32. That gives me 92hp, which I AM NOT GOING FOR MORE, I AM NOT GOING FOR MORE, I AM....

Now I think (probably not) I can relax a bit and stop worrying so much about space and just wait for my modules to arrive and build this slowly without overthinking this too much. Again, probably not...

you and coldbrightsunlight would make a great power-enabled-duo

#

Hey now! I had an 84hp case for 3-4 years friend.

D.o.S. wrote:

vidret wrote:To be honest, the only way to know is to get it and play with it.

But if you want to play with levels and instruments get a swestopol.

Good module!

I'm kinda debating getting either a utemps or uO_C. What is the difference between the two ? Which one should I get if I don't plan on getting pams (at least for now) ?

Also will most likely get a plaits and I think I'd really like Zadar

I also kinda hate the computer things from what I have tried So I'd say keep it simple till you're really sure WHY you particularly want one of them? i.e. "I need to do this exact thing it does and nothing does it better".

That said that is my take, it may not be yours.

Yeah I understand, thanks for the headsup. However I've seen both on ann annie and lightbath (for examples) channel and both been compared in some ways to pams. I was wondering what are the differences between both? Which one would make more sence considering I have pachinko which may (from my understanding) overlap a bit with both? If only Divkid made a video on both

Temps seems to be compared to pams more so I might want to go with this one over O_c, at least for now...

tempi is "just" a clock source so it is quite different to PNW/O_c etc. It's a very good clock source! but that's all it does haha. It is compared to Pam's because obviously that is still sort of the "core" of PNW but also the original Pamela's Workout was also only clocks till they heavily updated it and added all the other stuff. This is not intended to do Tempi down, it looks great it is just a bit more limited (but seems like it does what it does very very well)

lol

Not sure if you made a typo or thought I was talking about make noise tempi, but I was asking about Temps_Utile and O_c.

I saw "temps" and read Tempi. Because I'm clever. Shut up.

Hahaha. I actually think you were not far from the actual answer. Temps_utile seems like it is mostly a clock generator/divider/multiplier and maybe some kind of sequencer. I think with Pachinko and Temps I'd be set for everything clock and sequencing related. O_c seems like it is more about cv, namely lfo and quantizing and random... I might be set on these with Pachinko, Ochd and the possibility that I get Zadar (which would do envelopes and vco but also lfo). Then I just need a filter, maybe another 4-6hp vco, some vcas, maybe another small envelope/function generator and finally some mixing stuff.

Here's an example: belgrad filter, electrosmith oscillator and everything vca/mixing/panning is random and could easily be changed but it gives an idea. I tried not to put 2hp/pico or other super small modules with tiny knobs just to see if I could do without them.


Even with a crazy-ass huge filter I might be good ?