E.V.A - C.V. Generator

Moderator: spruce_moose

Post Reply
User avatar
spruce_moose
committed
committed
Posts: 235
Joined: Thu Mar 14, 2013 6:38 pm
Location: Dunedin, NZ
Contact:
Contact spruce_moose

Re: E.V.A - C.V. Generator

Post by spruce_moose »

I got a bit carried away with the photoshop..

Image

Here's a bit more of an explanation..

-The E.V.A. is a rechargeable pocket sized device that contains the C.V. component of the the Lightning Wave Modulation Interface.

Modulation waveforms and step sequences can be created on the device using the fader to track in real-time or select sequential levels respectively.

The interface allows two modes to be selected:

Auto - this loops the recording as an LFO pattern

Manual - the recording is triggered one time by the "Tap" sensor or by plugging in a standard tap tempo pedal, adapted to a 3.5mm plug.

Additional specifications:

Output:

1x 3.5mm mono - C.V. 0-5V
1x 3.5mm mono - C.V. 0-5V inverted
1x 3.5mm mono - BPM sync - V/S-trig selectable

Input:

5V to 9V DC centre-negative 2.1mm pin

1x 1x 3.5mm mono - BPM sync - V/S-trig selectable

Tap sensor - capacitive - tapped for tempo or held for sequence recording

Sub-divisions selectable between 1-8

Bypass sensor - capacitive

Tempo dial - pressed to cycle presets, held to record modes

45mm Fader

Charging:

900mAh LiPol - Charge time 5 Hours

Battery life approx. 15 hours
Top
User avatar
DRodriguez
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 3666
Joined: Thu Apr 09, 2015 1:40 pm
Location: Brooklyn

Re: E.V.A - C.V. Generator

Post by DRodriguez »

Yesss. So sexy. Any idea on the release date?
Top
User avatar
Iommic Pope
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 11400
Joined: Tue Mar 05, 2013 8:41 pm
Location: Frimmin' on the Fram

Re: E.V.A - C.V. Generator

Post by Iommic Pope »

Shut up and take my money.
WWPD?
fcknoise wrote:You are all fucking tryhard effort posting nerds
Invisible Man wrote: I'm probably the most humble person I know. I feel good about smelling my own butthole.
Jesus Was a Robot wrote:Did you just assume Billy Corgan's dildo preference??
Top
User avatar
baremountain
FAMOUS
FAMOUS
Posts: 1164
Joined: Mon Jun 27, 2016 2:19 pm
Location: Dallas, TX
Contact:
Contact baremountain

Re: E.V.A - C.V. Generator

Post by baremountain »

Oh man this sounds great. I finished my CV amplifier too so I'm even more excited to have one of these on hand
Inner Vegas wrote:I don't think anyone is Obama
#wheresthebirthcertificate #obamahoax

solo tunes:
completed works || loosey goosey releases
associated acts:
Raab Zamboni (fake jazz/real noise//sax, modular synth, editing, misc) || Field Guide (my best friends//sax on 2 tracks)

I make t-shirts, patches, koozies, buttons, CDs, sometimes tapes, and eventually i'll start working on pedals again. DM me for pricing!
Top
User avatar
jrfox92
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 4674
Joined: Sun Jun 22, 2014 11:23 am

Re: E.V.A - C.V. Generator

Post by jrfox92 »

Iommic Pope wrote:Image
Since I always forget:
Inconuucl wrote:You can't kill Strymon, it'll just resurrect 3 days later.
BitchPudding wrote:Despite all my rage, I am still just eating tacos in a cage.
Inconuucl wrote:Welcome to ilf, we have three jokes and twelve posters. <3
Top
User avatar
Iommic Pope
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 11400
Joined: Tue Mar 05, 2013 8:41 pm
Location: Frimmin' on the Fram

Re: E.V.A - C.V. Generator

Post by Iommic Pope »

Thanks bud.
I was on mobile. :thumb:
WWPD?
fcknoise wrote:You are all fucking tryhard effort posting nerds
Invisible Man wrote: I'm probably the most humble person I know. I feel good about smelling my own butthole.
Jesus Was a Robot wrote:Did you just assume Billy Corgan's dildo preference??
Top
User avatar
spruce_moose
committed
committed
Posts: 235
Joined: Thu Mar 14, 2013 6:38 pm
Location: Dunedin, NZ
Contact:
Contact spruce_moose

Re: E.V.A - C.V. Generator

Post by spruce_moose »

I'm having Disaster Area mill the Lwave cases and do samples for the EVA. If the holes are in the right place I'll reorder again straight away, but should be able to get 3 together in the next few weeks. I really need to stop speculating shipping dates though as it always seems to take way longer than I guess.

The packaging is sorted but I still have to reconfigure the instruction manual, which might take me half a week or so too..
Top
User avatar
Iommic Pope
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 11400
Joined: Tue Mar 05, 2013 8:41 pm
Location: Frimmin' on the Fram

Re: E.V.A - C.V. Generator

Post by Iommic Pope »

MOAR SPECULATION!
MOAR INTUITIVE CONTROLS!
LESS INSTRUCTION MANUALS, AND THEREFORE INFORMED OPERATION DELIVERING QUALITY AND FULL POTENTIAL FUNCTIONALITY!
WWPD?
fcknoise wrote:You are all fucking tryhard effort posting nerds
Invisible Man wrote: I'm probably the most humble person I know. I feel good about smelling my own butthole.
Jesus Was a Robot wrote:Did you just assume Billy Corgan's dildo preference??
Top
User avatar
Iommic Pope
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 11400
Joined: Tue Mar 05, 2013 8:41 pm
Location: Frimmin' on the Fram

Re: E.V.A - C.V. Generator

Post by Iommic Pope »

Jonny from 80 Tape personally sent me the instruction manual for my Limbo Proto.
I still don't know how to use it properly.
:picard:
WWPD?
fcknoise wrote:You are all fucking tryhard effort posting nerds
Invisible Man wrote: I'm probably the most humble person I know. I feel good about smelling my own butthole.
Jesus Was a Robot wrote:Did you just assume Billy Corgan's dildo preference??
Top
User avatar
spruce_moose
committed
committed
Posts: 235
Joined: Thu Mar 14, 2013 6:38 pm
Location: Dunedin, NZ
Contact:
Contact spruce_moose

Re: E.V.A - C.V. Generator

Post by spruce_moose »

Haha I was ranting about how hard it is to write instruction manuals to him the other night. You should tag him :)
Top
User avatar
Iommic Pope
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 11400
Joined: Tue Mar 05, 2013 8:41 pm
Location: Frimmin' on the Fram

Re: E.V.A - C.V. Generator

Post by Iommic Pope »

:lol:
He did good, I'm just a neanderthal.
WWPD?
fcknoise wrote:You are all fucking tryhard effort posting nerds
Invisible Man wrote: I'm probably the most humble person I know. I feel good about smelling my own butthole.
Jesus Was a Robot wrote:Did you just assume Billy Corgan's dildo preference??
Top
colourofsound
involved
involved
Posts: 88
Joined: Thu Jan 26, 2017 6:17 am
Contact:
Contact colourofsound

Re: E.V.A - C.V. Generator

Post by colourofsound »

So is this basically a cooler, smaller more function-rich 8 Step Program? But with like, 255 steps instead of 8? ;) Very appealing
Music Person, Computer Person, Outdoor Person. Not always in that order :!!!:
https://christianwalker.me/
If you want mixing/mastering or session guitar work, I know about 1000 people on reddit who'll do that for nothing
Top
User avatar
Iommic Pope
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 11400
Joined: Tue Mar 05, 2013 8:41 pm
Location: Frimmin' on the Fram

Re: E.V.A - C.V. Generator

Post by Iommic Pope »

Im super keen on this, but is there a way to do power/voltage range to suit dwarfcraft shit?
WWPD?
fcknoise wrote:You are all fucking tryhard effort posting nerds
Invisible Man wrote: I'm probably the most humble person I know. I feel good about smelling my own butthole.
Jesus Was a Robot wrote:Did you just assume Billy Corgan's dildo preference??
Top
User avatar
UglyCasanova
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 12534
Joined: Mon Jul 28, 2014 6:47 am
Location: Norway

Re: E.V.A - C.V. Generator

Post by UglyCasanova »

My body/MS-20m is ready! :zen:
Top
User avatar
spruce_moose
committed
committed
Posts: 235
Joined: Thu Mar 14, 2013 6:38 pm
Location: Dunedin, NZ
Contact:
Contact spruce_moose

Re: E.V.A - C.V. Generator

Post by spruce_moose »

I'm not sure what the Dwarftcraft input range is. I use it on a ms10 that specifies +/-5V and still get plenty of range by only sending 0 to +5V.. Boss expression pedals appear to work between 0-3V it seems.
Top
Post Reply

Return to “Lightning Wave”