Custom Shit

skullservant · Post by **skullservant** » Thu Sep 26, 2013 9:12 am

BAM BAM BAM

jrmy · Post by **jrmy** » Thu Sep 26, 2013 1:36 pm

LaoWiz wrote:
image.jpg
First test for Matt/Idiotbox. He's an old homie I've known since 16. We were in a band for years. Nice to make stuff together!

This is awesome on so many levels. I am so tempted to get in on the preorders for one of these...

LaoWiz · Post by **LaoWiz** » Thu Sep 26, 2013 4:50 pm

jrmy wrote:
LaoWiz wrote:
image.jpg
First test for Matt/Idiotbox. He's an old homie I've known since 16. We were in a band for years. Nice to make stuff together!
This is awesome on so many levels. I am so tempted to get in on the preorders for one of these...

That demo of it is fierce! As well as the slaying ass sounds of his Dungeon Master!

LaoWiz · Post by **LaoWiz** » Mon Sep 30, 2013 1:12 am

Coming soon...

kbit · Post by **kbit** » Mon Sep 30, 2013 11:35 am

jrmy · Post by **jrmy** » Mon Sep 30, 2013 10:01 pm

LaoWiz wrote:
jrmy wrote:
LaoWiz wrote:
image.jpg
First test for Matt/Idiotbox. He's an old homie I've known since 16. We were in a band for years. Nice to make stuff together!
This is awesome on so many levels. I am so tempted to get in on the preorders for one of these...
That demo of it is fierce! As well as the slaying ass sounds of his Dungeon Master!

Yeah, man - the DM is NUTSO! Did you have a hand helping on that one too?

LaoWiz · Post by **LaoWiz** » Mon Sep 30, 2013 10:44 pm

jrmy wrote:
LaoWiz wrote:
jrmy wrote:
LaoWiz wrote:
image.jpg
First test for Matt/Idiotbox. He's an old homie I've known since 16. We were in a band for years. Nice to make stuff together!
This is awesome on so many levels. I am so tempted to get in on the preorders for one of these...
That demo of it is fierce! As well as the slaying ass sounds of his Dungeon Master!
Yeah, man - the DM is NUTSO! Did you have a hand helping on that one too?

Nah, that was his first etch. It's sounds pretty thick, man!

LaoWiz · Post by **LaoWiz** » Tue Oct 01, 2013 1:53 am

KB's is almost done. Gotta flip two wires but also replace a pot that's under the board. Yikes

AxAxSxS · Post by **AxAxSxS** » Tue Oct 01, 2013 3:27 am

Yikes indeed. I recycled some pots in a lp build I was working on and one was bad, took forever for me to figure out. That looks just a "bit" more complex

goroth · Post by **goroth** » Tue Oct 01, 2013 4:30 pm

What is it KB, that looks mad!

kbit · Post by **kbit** » Tue Oct 01, 2013 4:39 pm

goroth wrote:What is it KB, that looks mad!

Tone Machine -> Pharaoh
Footswitch for each circuit, the TM octave, and a master bypass.
Plus a separate tone control for the octave setting.

The master bypass is something I reeeeally wanted because TM->muff is the shit.

goroth · Post by **goroth** » Tue Oct 01, 2013 4:45 pm

Dude, that is an awful lot of wow.

LaoWiz · Post by **LaoWiz** » Tue Oct 01, 2013 5:39 pm

Yea, it sucks cause I only have full size 25Kb pots for the highs control on the Pharoah that wouldn't fit because of the control knob spacing so I threw in a 25Ka pot but it doesn't respond at all. The pot is probably bad so gotta replace it. It's under the board which means that I have to loosen a lot of the hardware to get it out. Minor problem out of a bunch of potential problems so it could be way worse. Pharoah with the diode lift sounds so killer!

LaoWiz · Post by **LaoWiz** » Wed Oct 02, 2013 1:16 am

Played with this setup for awhile last night. Some great space fuzz sounds! Gristelizer ---> Warthog ---> Multiplex ---> Pharoah/FTM

AxAxSxS · Post by **AxAxSxS** » Wed Oct 02, 2013 1:23 am

Damn, that'd be one hell of a board right there.

ilovefuzz.com

Custom Shit

Re: Custom Shit

Re: Custom Shit

Re: Custom Shit

Re: Custom Shit

Re: Custom Shit

Re: Custom Shit

Re: Custom Shit

Re: Custom Shit

Re: Custom Shit

Re: Custom Shit

Re: Custom Shit

Re: Custom Shit

Re: Custom Shit

Re: Custom Shit

Re: Custom Shit