ilovefuzz.com

BEZFX wrote:
THIS IS THE WEEK!
Nameplates in today!

Circuit Boards and griptape are in Wednesday! (so you guys can finally SEE what the finished product looks like)

We're gonna start building the pre-orders immediately~ and we should have the HD demos up next week!

Still time to save 20% off your Street Sweeper, but scoop it up soon!


Thanks to all of you guys for believing in us and making this happen!

It look awesome.

More pedal porn on our facebook page!
http://www.facebook.com/bezfx


this is the unpainted casing, I just wanted to mock one up so you all could see, the grip tape came out PERFECTLY!


We're doing all the work making sure these are built to last,
Only 20 discounts left, come scoop yours up!
http://www.bezfx.com

Looks awesome!...but, remind me again...are they only available in the brushed-aluminum look?

I like pedal porn
And please, tell me this is serial number 3.

BEZFX wrote:this is the unpainted casing, I just wanted to mock one up so you all could see, the grip tape came out PERFECTLY!

I though you choose to keep it unpainted? What will be the finish?

BEZFX wrote:so far the buffed "chrome" looks the nicest/ is the cheapest/easiest/most consistent option, so I think that's where we're leanin' at the moment.

after we brush and polish, there's a clear layer of paint to preserve the shine~

currently it is the only planned finish...at least for the first run

Here is to wishing I had 200 bux right now!

Ah...so when you say "paint", it's really more..."clear-coat" I guess?

ah yes, I apologize for the non-clarity, I just meant there's still more to come,
I was just really happy with the griptape coming out so well, didn't want to wait to post the photo

Sorry for any confusion!

BEZFX wrote:ah yes, I apologize. for the non-clarity, I just meant there's still more to come, I was just really happy with the griptape coming out so well, didn't want to wait to post the photo

The wait is harder now...

I assure you we're doing everything we can to get them out ASAP :-D Closer every day!

That looks great, man.

Awesome

First, it look awesome... good job



1) First hole for output and second for the voice knob?
2) What it is?

Is there a led on the pedal?


Thanks!!

Those last two photos put it into perspective nicely
So this is in a standard wah-sized enclosure?

Hey Guys ~

actually Sylnau, actually this was pre-hole drilling~ (again I just wanted to show off the grip tape )

the first hole ("picture left" hole) is the output, and the other is actually the power
the intensity knob goes in front of the first hole, and then the switch is in front of the intensity knob ( all on the side you had pictured) so on the opposite side there is only the input hole.

the "what it is" is a knurled hinge pin, it will be hammered in, but once it goes in, it doesn't come out.
It keeps the two halves of the enclosure together, I was just using it to keep the pedal together for the photo.

there IS an LED which will be in front of the toe.

and StudioShutIn thank you very much! I wanted that last one to be the main photo but the other had more of a "money shot" with the glare as it were, and yes this is standard wah enclosure sized. not eating your board like them big morleys or a boss volume