Page 818 of 2753

Re: Let's see your PEDAL BOARD!

Posted: Thu Aug 30, 2012 6:21 pm
by bobcunningham
Gonna soon upgrade the Behringer which i use just for shimmer... but i'm seriously loving this setup:

Image

Re: Let's see your PEDAL BOARD!

Posted: Thu Aug 30, 2012 6:33 pm
by fungalattack
Where is ze fuzz? ;)

Re: Let's see your PEDAL BOARD!

Posted: Thu Aug 30, 2012 6:50 pm
by WeHuntKings
uhhh, he's got a LSTR, dood.

Re: Let's see your PEDAL BOARD!

Posted: Thu Aug 30, 2012 6:51 pm
by fungalattack
whoopsie when I first saw the pic i only saw the left half so i didn't see the LSTR and metal zone. ok pheeeeww i was scared for a sec. :)

Re: Let's see your PEDAL BOARD!

Posted: Thu Aug 30, 2012 7:00 pm
by kbit
loop wrote:Image


Holy shit, that's pretty. Also curious about the Moog, tall black one, and the two knober next to it.

Re: Let's see your PEDAL BOARD!

Posted: Thu Aug 30, 2012 7:33 pm
by loop
The black hammond is a box of rock distortion circuit I built on tag board.

smaller two knob pedal next to it is one of my (Upstate Analog) 1000hz fuzz
Image

The white Moog is a ring mod :hello:

Re: Let's see your PEDAL BOARD!

Posted: Thu Aug 30, 2012 8:33 pm
by bronzetalon
bobcunningham wrote:Gonna soon upgrade the Behringer which i use just for shimmer... but i'm seriously loving this setup:

Image


Seriously go for the stereo wet can have shimmer and will replace your hof too stick a 4545 at the end...soo good.

Re: Let's see your PEDAL BOARD!

Posted: Thu Aug 30, 2012 8:50 pm
by jrmy
loop wrote:The black hammond is a box of rock distortion circuit I built on tag board.

smaller two knob pedal next to it is one of my (Upstate Analog) 1000hz fuzz
Image

The white Moog is a ring mod :hello:


All right, I'll bite - is the 1000hz a Harmonic Percolator clone? Because that would be awesome.

And yep, that's a sexy-ass board.

Re: Let's see your PEDAL BOARD!

Posted: Thu Aug 30, 2012 9:49 pm
by Ancient Astronaught
I know I say this all the time but i seriously can't think of anything else i need for my board. I added the t1m controller for the space and swapped out the t1m mini buffer for the Dunwich one knob booster. I'm satisfied for the moment.

Polytune > Burial Chamber > Dr. Sci Elements > Timeline (w/ DMC3) > Space (w/ t1m E3D) > EB VPjr > Dunwich Boost :animal:

Image






loop wrote:Image


That is one hella sweet board, hows the muff?

Re: Let's see your PEDAL BOARD!

Posted: Thu Aug 30, 2012 10:12 pm
by loop
jrmy wrote:
loop wrote:The black hammond is a box of rock distortion circuit I built on tag board.

smaller two knob pedal next to it is one of my (Upstate Analog) 1000hz fuzz
Image

The white Moog is a ring mod :hello:


All right, I'll bite - is the 1000hz a Harmonic Percolator clone? Because that would be awesome.

And yep, that's a sexy-ass board.



it is and thanks! :hug:

Re: Let's see your PEDAL BOARD!

Posted: Thu Aug 30, 2012 10:16 pm
by loop
Ancient Astronaught wrote:I know I say this all the time but i seriously can't think of anything else i need for my board. I added the t1m controller for the space and swapped out the t1m mini buffer for the Dunwich one knob booster. I'm satisfied for the moment.

Polytune > Burial Chamber > Dr. Sci Elements > Timeline (w/ DMC3) > Space (w/ t1m E3D) > EB VPjr > Dunwich Boost :animal:

Image






loop wrote:Image


That is one hella sweet board, hows the muff?



as is yours!

the muff is incredible.. I didn't think anything would ever knock off my triangle clone. I put a lot of work into that one.. og transistors, components, same type enclosure, etc.. looks and sounds pretty damn close. Never thought it would happen but the "inky" managed to beat it out... at least for now. The low end is killer and unlike a lot of thicker sounding muff's this has really good clarity and punch which is why I normally lean toward the tri. I'm over the moon with it.. thanks again!

Re: Let's see your PEDAL BOARD!

Posted: Thu Aug 30, 2012 10:31 pm
by Ancient Astronaught
Thanks!!!

That's awesome! The low end is just insane on that pedal, but not in a muddying way I always like that about it. I'm glad it went to a good home! and no problem!

Re: Let's see your PEDAL BOARD!

Posted: Fri Aug 31, 2012 12:21 am
by spacelordmother
loop wrote:Image


A work of goddamned art, bro. :thumb:

Re: Let's see your PEDAL BOARD!

Posted: Fri Aug 31, 2012 10:36 am
by bronzetalon
Ancient Astronaught wrote:I know I say this all the time but i seriously can't think of anything else i need for my board. I added the t1m controller for the space and swapped out the t1m mini buffer for the Dunwich one knob booster. I'm satisfied for the moment.

Polytune > Burial Chamber > Dr. Sci Elements > Timeline (w/ DMC3) > Space (w/ t1m E3D) > EB VPjr > Dunwich Boost :animal:

Image



I gotta ask why do you have the DMC3 and the E3D? You can run the DMC3 into the space and the midi out on the space to your timeline and control patch changes simultaneously this also allows to you sync the tap tempo between the timeline and space.

Re: Let's see your PEDAL BOARD!

Posted: Fri Aug 31, 2012 11:04 am
by Silhouettaofaman
Zi6_0744.JPG
Zi6_0743.JPG
Well here it is. My first pedal(noboard). The wires are such a mess, and if I turn on all the pedals I can barely hear the guitar :p My shitty Dean Evo and Roland cube are there in the background. Nonetheless, it sounds fucking badass, and as soon as I can give it more power I am going to rip the floorboards off with the sound.

Guitar>Hyperion>Double Muff>Four Eyes Fuzz>Rocktek Chorus>Memory Toy

Moog Ep-2 is hooked to the Four Eyes.