Page 777 of 1757
Re: The spite, hate, rage, apathy and mild irritation thread
Posted: Sun Mar 31, 2013 4:39 am
by goosekevin
backwardsvoyager wrote:tomlane95 wrote:just went for a walk, it was very nice, rode around on my scooter, ran into a friend, anjoyed the sunshine, met a rad cat, saw some really gorgeous horses and decided i should learn how to ride and then i found $50 in the dirt!
Thats awesome dude
(I think you're in the wrong thread though
)
Whoops! Sorry dudes haha
Re: The spite, hate, rage, apathy and mild irritation thread
Posted: Sun Mar 31, 2013 10:33 am
by Saulo
goroth wrote:Get a nut file for a 24 and DIY it!
do people do it a lot? is it easy?
Re: The spite, hate, rage, apathy and mild irritation thread
Posted: Sun Mar 31, 2013 11:13 am
by goroth
It's nothing you can really go wrong with -,the nut is already shaped properly, so you don't have worry about that. If you buy/borrow a file then it'll be shaped properly so the string sits perfectly. But as Achtane said, sandpaper will do the trick. Dunno, I've never used it but maybe 180 grade? Achtane?
Just fold it over on itself to make an edge with sandpaper on both sides and take things slowly! Sand a bit, slot the string in and check it, sand a bit more.
Re: The spite, hate, rage, apathy and mild irritation thread
Posted: Sun Mar 31, 2013 11:44 am
by IEatCats
dubkitty wrote:i'm really glad that you're OK, Cats. seat belt, i assume?
Yeah. Apparently my car's airbags were broken and didn't go off. It's really amazing that today I only have a tiny bit of neck pain.
I rolled a canvas top car on a highway. I should probably be dead or in the hospital, but I'm not.
Re: The spite, hate, rage, apathy and mild irritation thread
Posted: Sun Mar 31, 2013 5:37 pm
by Saulo
goroth wrote:It's nothing you can really go wrong with -,the nut is already shaped properly, so you don't have worry about that. If you buy/borrow a file then it'll be shaped properly so the string sits perfectly. But as Achtane said, sandpaper will do the trick. Dunno, I've never used it but maybe 180 grade? Achtane?
Just fold it over on itself to make an edge with sandpaper on both sides and take things slowly! Sand a bit, slot the string in and check it, sand a bit more.
thanks y'all!
Re: The spite, hate, rage, apathy and mild irritation thread
Posted: Sun Mar 31, 2013 6:45 pm
by Achtane
goroth wrote:It's nothing you can really go wrong with -,the nut is already shaped properly, so you don't have worry about that. If you buy/borrow a file then it'll be shaped properly so the string sits perfectly. But as Achtane said, sandpaper will do the trick. Dunno, I've never used it but maybe 180 grade? Achtane?
Just fold it over on itself to make an edge with sandpaper on both sides and take things slowly! Sand a bit, slot the string in and check it, sand a bit more.
Yep, you got it. I just use whatever's handy. Actually I think the folded up piece in my box-of-guitar-techy-stuff is like 80-grit for maximum laziness.
Just make sure you only widen it, you don't wanna reduce the height of any of the strings.
Re: The spite, hate, rage, apathy and mild irritation thread
Posted: Sun Mar 31, 2013 8:20 pm
by psychedelicrelic
Counter Strike GO servers on ps3 have been down for a week an it's kinda pissing me off. Not sure if that DDOSing hubbalaboo is the cause but I want to punch valve in the crotch.
Is it true that if you approach George Clooney and tell him you saw Batman and Robin in theaters, He'll refund you $10?
Re: The spite, hate, rage, apathy and mild irritation thread
Posted: Sun Mar 31, 2013 8:24 pm
by snipelfritz
psychedelicrelic wrote:Is it true that if you approach George Clooney and tell him you saw Batman and Robin in theaters, He'll refund you $10?
THERE'S ONLY ONE WAY TO FIND OUT!!!
Re: The spite, hate, rage, apathy and mild irritation thread
Posted: Sun Mar 31, 2013 11:18 pm
by The4455
Achtane wrote:goroth wrote:It's nothing you can really go wrong with -,the nut is already shaped properly, so you don't have worry about that. If you buy/borrow a file then it'll be shaped properly so the string sits perfectly. But as Achtane said, sandpaper will do the trick. Dunno, I've never used it but maybe 180 grade? Achtane?
Just fold it over on itself to make an edge with sandpaper on both sides and take things slowly! Sand a bit, slot the string in and check it, sand a bit more.
Yep, you got it. I just use whatever's handy. Actually I think the folded up piece in my box-of-guitar-techy-stuff is like 80-grit for maximum laziness.
Just make sure you only widen it, you don't wanna reduce the height of any of the strings.
Yah, it's really easy. I used sandpaper to make the nut on my bullet bass bigger to accommodate a 105 gauge bass string.
Re: The spite, hate, rage, apathy and mild irritation thread
Posted: Mon Apr 01, 2013 5:53 pm
by RR Bigman
I think I hyperextended my shoulder helping my parents put their new fridge in, it pops whenever I move it forwards or backwards, rotation and moving it out doesn't seem to cause any pain or nasty sounds. Wonder if my subpar health insurance covers this shit.
Re: The spite, hate, rage, apathy and mild irritation thread
Posted: Mon Apr 01, 2013 9:54 pm
by IEatCats
I,Galactus wrote:Yeah, a rolled ragtop with no decapitation belongs in the happiness thread. Hope everything works out OK and glad you're still with us.
Thanks man.
Re: The spite, hate, rage, apathy and mild irritation thread
Posted: Mon Apr 01, 2013 10:03 pm
by kbit
This is the only thing that fooled me today.
It hurt so bad.
http://nefariousrealm.com/homenew/?p=14298
Re: The spite, hate, rage, apathy and mild irritation thread
Posted: Tue Apr 02, 2013 12:43 am
by Scruffie
Why did I get drunk and do that
Re: The spite, hate, rage, apathy and mild irritation thread
Posted: Tue Apr 02, 2013 1:44 am
by psychedelicrelic
Scruffie wrote:Why did I get drunk and do that
Re: The spite, hate, rage, apathy and mild irritation thread
Posted: Tue Apr 02, 2013 1:48 am
by Scruffie
psychedelicrelic wrote:Scruffie wrote:Why did I get drunk and do that
Hey, if anyone did the raping it was her, she started it and I was a whole lot drunker...
This is going to get awkward.