ilovefuzz.com

@Officer: I used a dpdt if you can believe it! It acts normal/off when down, and when up lets the 50k pot in. I would have prefered to use a 3dpt toggle so I could have wired each lug of the pot to the board and had true switching between 50k and 100k, but I didn't have a 3dpt toggle on hand. I might end up eventually doing that though cause it makes more sense to me

Officer Bukowski wrote::hug:

I'll be starting when I get home from class, so expect a little update later today

Dude that is so flipping awesome, my quest for octaves continues!!

Yeah I've thought of doing that with a 3PDT before. It'd be coolest with a stomp since if you're gonna bend over to hit a toggle you might as well just turn the knob (then you don't have that preset factor though).

You could also probly just add a 50k resistor on a switch in series with the wiper huh? Dunno if that would have an adverse effect on the pot taper but you could probably make some interesting noises with it

Hbomb, I had the original Logic Fuzz and the octave was not very prominent, but the fuzz is really cool and texturey

Officer Bukowski wrote:Yeah I've thought of doing that with a 3PDT before. It'd be coolest with a stomp since if you're gonna bend over to hit a toggle you might as well just turn the knob (then you don't have that preset factor though).

You could also probly just add a 50k resistor on a switch in series with the wiper huh? Dunno if that would have an adverse effect on the pot taper but you could probably make some interesting noises with it

Hbomb, I had the original Logic Fuzz and the octave was not very prominent, but the fuzz is really cool and texturey

I already have prominent octave, now I just need hints of noise!!

Officer Bukowski wrote:Yeah I've thought of doing that with a 3PDT before. It'd be coolest with a stomp since if you're gonna bend over to hit a toggle you might as well just turn the knob (then you don't have that preset factor though).

You could also probly just add a 50k resistor on a switch in series with the wiper huh? Dunno if that would have an adverse effect on the pot taper but you could probably make some interesting noises with it

Hbomb, I had the original Logic Fuzz and the octave was not very prominent, but the fuzz is really cool and texturey

Yeah, I have a ton of ideas I want to try. I'll be doing a blend knob as well as the 3DPT stomp switch for the CaveDweller I'm building Excane, I'm sure I'll have to make one for myself with the same features after that hahahaha

This page is awesome but has a serious lack of boards,

Sweet, what's the Morley you're using?

That's an old power way boost volume. Sucked tone like mad

Bomes Electric Octa-Tron > Tym Guitars Bigg Mudd (Triangle V) > Paul Cochrane Tim > Moog Ring Mod > Empress Phaser > Endangered Audio EA4096 > Empress Superdelay

Fucking LOVE this set-up so much. I have been playing primarily ambient solo guitar stuff recently, just got the SD and the BM in the mail yesterday, and both were exactly what I needed. Lands me in the realm of these two Brian Eno/Robert Fripp records I love ("No Pussyfooting" and "Evening Star"), though of course I am 1/18 as talented and about 30 years too late but whatever. It's fun to play around and pretend I sound like that.

Big Mudd is the Muff I have always been looking for. Way lower gain, way cleaner, sounds awesome with the Octa-Tron running into it (which itself is a sleeper pedal I bet would be a hit here). Pedal GAS is currently abated.

insubordination wrote:

Bomes Electric Octa-Tron > Tym Guitars Bigg Mudd (Triangle V) > Paul Cochrane Tim > Moog Ring Mod > Empress Phaser > Endangered Audio EA4096 > Empress Superdelay

Fucking LOVE this set-up so much. I have been playing primarily ambient solo guitar stuff recently, just got the SD and the BM in the mail yesterday, and both were exactly what I needed. Lands me in the realm of these two Brian Eno/Robert Fripp records I love ("No Pussyfooting" and "Evening Star"), though of course I am 1/18 as talented and about 30 years too late but whatever. It's fun to play around and pretend I sound like that.

Big Mudd is the Muff I have always been looking for. Way lower gain, way cleaner, sounds awesome with the Octa-Tron running into it (which itself is a sleeper pedal I bet would be a hit here). Pedal GAS is currently abated.

That is one enviable delay set up

---

insubordination wrote:

Bomes Electric Octa-Tron > Tym Guitars Bigg Mudd (Triangle V) > Paul Cochrane Tim > Moog Ring Mod > Empress Phaser > Endangered Audio EA4096 > Empress Superdelay

Fucking LOVE this set-up so much. I have been playing primarily ambient solo guitar stuff recently, just got the SD and the BM in the mail yesterday, and both were exactly what I needed. Lands me in the realm of these two Brian Eno/Robert Fripp records I love ("No Pussyfooting" and "Evening Star"), though of course I am 1/18 as talented and about 30 years too late but whatever. It's fun to play around and pretend I sound like that.

Big Mudd is the Muff I have always been looking for. Way lower gain, way cleaner, sounds awesome with the Octa-Tron running into it (which itself is a sleeper pedal I bet would be a hit here). Pedal GAS is currently abated.

Yay!! I really love this one.
Not a fan of the Tim... but the rest of the board is awesome.
First time is heard of the Bomes Electric Octa-Tron... look very interesting.

ok the bomes pedals look awesome
the octa-tron looks sweet
and the ape delay looks insane

Cool!