Page 755 of 3279
Re: What is in the post? The thread of and for GAS!
Posted: Sat Sep 29, 2012 5:23 pm
by WeHuntKings
finally getting an algal bloom. i've wanted one ever since i joined up here.
Re: What is in the post? The thread of and for GAS!
Posted: Sat Sep 29, 2012 5:42 pm
by coldbrightsunlight
WeHuntKings wrote:finally getting an algal bloom. i've wanted one ever since i joined up here.
Yesss. Sure you'll love it, it's an awesome pedal! Gnarly as fuck and note clarity at the same time.
Re: What is in the post? The thread of and for GAS!
Posted: Sat Sep 29, 2012 5:54 pm
by WeHuntKings
monkeydancer wrote:WeHuntKings wrote:finally getting an algal bloom. i've wanted one ever since i joined up here.
Yesss. Sure you'll love it, it's an awesome pedal! Gnarly as fuck and note clarity at the same time.
which is what i need from a fuzz these days, i'm playing too many weird chords that turn to mud through a muff or other such fuzzes. it should pair well with my scarab
that being said, i still reeeeaaalllyyy want a super puzzle...
Re: What is in the post? The thread of and for GAS!
Posted: Sat Sep 29, 2012 6:33 pm
by Mudfuzz
Coming: Sobbat DB-BASS, EQD humming bird, Organizer.
Going: Whetstone, OK
Re: What is in the post? The thread of and for GAS!
Posted: Sat Sep 29, 2012 6:33 pm
by mathias
I ordered the Ampeg 1x12 speaker cab that matches my new Ampeg head, because there's a $75 rebate until tomorrow, and that makes it way cheaper than even the Avatar stuff.
Comes loaded with a Celestion Vintage 30. Should be here next week.

I'm such an impulse buyer

Re: What is in the post? The thread of and for GAS!
Posted: Sat Sep 29, 2012 7:24 pm
by ryan summit
mathias wrote:I'm such an impulse buyer

but dont it feel so good
Re: What is in the post? The thread of and for GAS!
Posted: Sat Sep 29, 2012 7:44 pm
by skullservant
Well, this guy showed up today:

At first I was a little hesitant because it's a Muff, and in my stubborn little eyes and all my experimentation nothing quite has what my Sovtek does. But then I started actually experimenting with my FX chain, and with the settings in general and I dig. I DIG HARD. I usually keep it in tone bypass so it cuts a little more and acts more raw like a distortion. But I've got the settings with the tone rolled all the way back (low pass'd) for when the tone bypass isn't on, so I can loop a bass tone with the bypass off, then click the bypass on for guitar stuff. It's all stuff that I've done before in muffs, just not executed this awesomely.
Re: What is in the post? The thread of and for GAS!
Posted: Sat Sep 29, 2012 10:04 pm
by sylnau
Out:
Dr. Scientist, Cosmichorus v2
I wish I could have keep it.
Pre-Ordered:
Dr. Scientist, Cosmichorus v3

Re: What is in the post? The thread of and for GAS!
Posted: Sat Sep 29, 2012 10:13 pm
by coldbrightsunlight
WeHuntKings wrote:monkeydancer wrote:WeHuntKings wrote:finally getting an algal bloom. i've wanted one ever since i joined up here.
Yesss. Sure you'll love it, it's an awesome pedal! Gnarly as fuck and note clarity at the same time.
which is what i need from a fuzz these days, i'm playing too many weird chords that turn to mud through a muff or other such fuzzes. it should pair well with my scarab
that being said, i still reeeeaaalllyyy want a super puzzle...
You are going to fucking love the AB, it's the fucking shit. Stacks like a bitch too.
Re: What is in the post? The thread of and for GAS!
Posted: Sat Sep 29, 2012 10:52 pm
by FancyMike
skullservant wrote:Well, this guy showed up today:

At first I was a little hesitant because it's a Muff, and in my stubborn little eyes and all my experimentation nothing quite has what my Sovtek does. But then I started actually experimenting with my FX chain, and with the settings in general and I dig. I DIG HARD. I usually keep it in tone bypass so it cuts a little more and acts more raw like a distortion. But I've got the settings with the tone rolled all the way back (low pass'd) for when the tone bypass isn't on, so I can loop a bass tone with the bypass off, then click the bypass on for guitar stuff. It's all stuff that I've done before in muffs, just not executed this awesomely.
What you got a ect too? Nice dude. I've had very little time with mine yet but it's real good so far
Re: What is in the post? The thread of and for GAS!
Posted: Sat Sep 29, 2012 10:55 pm
by skullservant
Yeah I'm digging mine a lot. We really are twins. Might get Dan to etch it after I spend some more time with it
Re: What is in the post? The thread of and for GAS!
Posted: Sat Sep 29, 2012 11:14 pm
by kbit
Fuck yeah all these ECT's in here. I LOVE THAT FUZZ SO MUCH.
Re: What is in the post? The thread of and for GAS!
Posted: Sun Sep 30, 2012 1:06 am
by Rygot
Achtane wrote:Aw man, looks nice. What's the delay time like?
Lately...it feels like all my wacky sounds just up and left. I dig my pedalboard, but there's too much dirt and not enough "wat". Phaser lasers and a delay just isn't...isn't...
[youtube]http://www.youtube.com/watch?v=wflQ_0fkkog[/youtube]
Wait, I have a devious plan for my cassette deck once a power cable arrives though.
The delay time isn't bad, definitely more of a slapback type thing. Cool though because thats really all I plan on using it for, and messing with the playback stuff.
Helter wrote:Rygot wrote:So this came in today.
...So good.
Univox??
Unicord, but same difference, made in the same place.
Re: What is in the post? The thread of and for GAS!
Posted: Sun Sep 30, 2012 1:29 am
by Achtane
All you guys and your fancy loopin' pedals...
I've got somethin' good going on now. Don't know where to post this stupid thing


Hell yeah.
Found this jawn in the garage and recently got power and RCA-to-1/4 cables for it. Plus, tonight I added a toggle on the back that bypasses the "erase" head, so you can record shit on top of shit, as opposed to it clearing while recording. Then when the tape gets saturated or you're bored, switch it back to normal mode and erase/redo.
I think that if I make a copy of the looped tape and play that while recording new layers onto the other one, so I can hear what's going on, it'll be...you know, kinda like the most labor-intensive looper.
Gonna mess around with little 6-second tape loops and such too. But I have a way better mod planned...just not for 1:30 AM.
THIS IS WHAT HAPPENS WHEN THERE'S A SEVERE LACK OF GEAR FUNDS
CRAZY SHIT HAPPENS
Re: What is in the post? The thread of and for GAS!
Posted: Sun Sep 30, 2012 2:38 am
by Big Mon
Achtane wrote:All you guys and your fancy loopin' pedals...
I've got somethin' good going on now. Don't know where to post this stupid thing


Hell yeah.
Found this jawn in the garage and recently got power and RCA-to-1/4 cables for it. Plus, tonight I added a toggle on the back that bypasses the "erase" head, so you can record shit on top of shit, as opposed to it clearing while recording. Then when the tape gets saturated or you're bored, switch it back to normal mode and erase/redo.
I think that if I make a copy of the looped tape and play that while recording new layers onto the other one, so I can hear what's going on, it'll be...you know, kinda like the most labor-intensive looper.
Gonna mess around with little 6-second tape loops and such too. But I have a way better mod planned...just not for 1:30 AM.
THIS IS WHAT HAPPENS WHEN THERE'S A SEVERE LACK OF GEAR FUNDS
CRAZY SHIT HAPPENS
The FUCK...

That's insane!
incoming: a pedal
