ilovefuzz.com

skullservant wrote:All done:D

EBVPjr-> Korg Pitch Black -> Blackout Effectors Very Special Twosome-> 70's DMM (Thanks Pumpkin!)-> DD7-> Sunn Sceptre (Reverb on 3, mid boost off)

this is fucking perfect.

ALL I NEED BABY

skullservant wrote:Thanks buddy

And it's not super super lofi when I crank it, but there is some chip noise which I would expect. I'd be curious to hear yours! Where'd you get it from again??

hey how much did you pay for that vintage DMM?

Pumpkin hooked him up, no doubt.

snipelfritz wrote:Pedalboard as of today.




Plans: Swap Fender tuner for Pitchblack; Swap DE-7 for Dispatch Master; Get tremolo for that gap up top, maybe Hummingbird.

shout at me when you get rid of that DE-7 I have traded away 2 of them and keep kicking myself for it

skullservant wrote:Thanks buddy

And it's not super super lofi when I crank it, but there is some chip noise which I would expect. I'd be curious to hear yours! Where'd you get it from again??

Mine is somehow not really noisy or anything (at least not that I notice) but the repeats get all fucked up at the max delay time (which isn't very long). I'll record you a clip tomorrow or something when I can make some noise.

I got it here in the b/s/t from Phengren Oswald. I got it for like $45 since honestly it needs a lot of work to be board-worthy. It works though and it sounds rad!

Thats awesome Officer!

And yeah, me and Pumpkin worked out a deal with the DMM- I sent him a Gloom Drive for part of it! He's a rad dude

Skull - you gonna keep your tuner and volume permanently off the board?

Nah. I'm meeting up with Ancient on Thursday and swapping my PT-1 for a PT-Jr again. That way I can have everything including power supply on my board again! The DMM dominates too much space for the plank haha

My DMM is huge - I swap it out for my 616 all the time and I'm always amazed at home much space is there....

I've always had some attraction to bizarrely large pedals for whatever reason. GIVE ME A WHOLE BOARD OF DELUXE MEMORY MAN SIZED PEDALS>>>>

skullservant wrote:Nah. I'm meeting up with Ancient on Thursday and swapping my PT-1 for a PT-Jr again. That way I can have everything including power supply on my board again! The DMM dominates too much space for the plank haha

hahaha seems we're both trading to be able to fit volume pedals on our boards My PTjr is perfect to fit all my pedals except my volume pedal, and the PT-1 is perfect, same depth as the jr but wider, just enough to fit a VPjr.

Here's my current state of affairs, Pt-1 on the left is my bass board and the PTjr (until thursday) is my guitar board.


Guitar board close up (and not as blurry )

All I'm waiting on is a DMC-3 timeline controller, and mounting the volume pedal and i'm done.

Bass board close up: (also not so blurry)

This one's waiting on a pedaltrain 3 pedal riser, and a Dunwich Boost pedal (clean boost / 250hz boost switchable), and then mounting my a/b box at the front so we can run a bass synth through it when necessary.


Aaaaaaaaan for shits n giggles an amp rig shot.... (this is the gigging rig)

Those Monoliths.... WANT.

I missed the one on the bay yesterday. BUMMED.

excane wrote:Those Monoliths.... WANT.

I missed the one on the bay yesterday. BUMMED.

I them on bass, huge low end, sound great with active and passive basses, and more true to vintage tones but with a wider range. The superfuzz side of the tectonic shift with the octave switch on is the heaviest velcro bass sound evah! The BMP on the left I now have dialed in the tone almost full CCW and the Sustain at like 4 and it's super synthy. I have the Big Muff side of the TS setup up for a classic hi-gain muff tone and it fits the bill spot on.

Ancient Astronaught wrote:

skullservant wrote:Nah. I'm meeting up with Ancient on Thursday and swapping my PT-1 for a PT-Jr again. That way I can have everything including power supply on my board again! The DMM dominates too much space for the plank haha

hahaha seems we're both trading to be able to fit volume pedals on our boards My PTjr is perfect to fit all my pedals except my volume pedal, and the PT-1 is perfect, same depth as the jr but wider, just enough to fit a VPjr.

Here's my current state of affairs, Pt-1 on the left is my bass board and the PTjr (until thursday) is my guitar board.


Guitar board close up (and not as blurry )

All I'm waiting on is a DMC-3 timeline controller, and mounting the volume pedal and i'm done.

Bass board close up: (also not so blurry)

This one's waiting on a pedaltrain 3 pedal riser, and a Dunwich Boost pedal (clean boost / 250hz boost switchable), and then mounting my a/b box at the front so we can run a bass synth through it when necessary.


Aaaaaaaaan for shits n giggles an amp rig shot.... (this is the gigging rig)

fuck. me.

hly. sht.

wow.

fuck.