Let's see your PEDAL BOARD!

General Gear Discussion - effects, synths, etc.

Moderator: Ghost Hip

User avatar
hbombgraphics
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 8654
Joined: Tue Aug 17, 2010 2:39 pm
Location: Central NY

Re: Let's see your PEDAL BOARD!

Post by hbombgraphics »

just finished this up
waiting on an 8 inch stereo cable from amazon to connect my RC3 and the aux switch
It's just plywood from megaboard that I cut down to fit the spot under the bench in my office
this is small for me but with all the different sounds it doesn't feel small
one thing i think is stupid on the M5 is that some of the heavier drive sounds don't have a gate available
that has to be possible- other than that it has eliminated about 5 pedals from my old board


I think this gets me every sound I need
fits the space I have for a large board and is way more portable than megaboard
Ordered a keyboard bag from amazon that it will travel in if needed

order for those interested
Tone Repaer, dirge Comp, 4545, groove Regulator, Blunderbuss, PS6, Tap Trem, RV5, Monarch, EchoBox, Volume, Supernatural, PitchFactor, M5, Time Bender, Slicer, RC3

Monarch is running at 18 volts
The White switch is for the pitch Factor
The knob on the m5 is a T1M expression knob which allows for some awesome sounds and even shifts the entire eq and gain spectrum of a few distortions
I wanted the blunderbuss post PS6 but it was not responding well to the buffers ahead of it
Attachments
september big board 1.jpg
september big board.jpg
Gunner Recall wrote:This thread is bad and everyone in it should feel bad.
Iommic Pope wrote:This thread is mediocre at best, but I encourage everyone posting in it to feel as awesome as possible.
https://soundcloud.com/hbombgraphics
User avatar
skullservant
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 16575
Joined: Wed Dec 28, 2011 12:55 am

Re: Let's see your PEDAL BOARD!

Post by skullservant »

Holy crap man!
User avatar
hbombgraphics
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 8654
Joined: Tue Aug 17, 2010 2:39 pm
Location: Central NY

Re: Let's see your PEDAL BOARD!

Post by hbombgraphics »

yeah I had a very stressful week and this probably kept me from having a complete breakdown,
also: I got the zip ties at ollies 80s neon colors!!!!
Gunner Recall wrote:This thread is bad and everyone in it should feel bad.
Iommic Pope wrote:This thread is mediocre at best, but I encourage everyone posting in it to feel as awesome as possible.
https://soundcloud.com/hbombgraphics
User avatar
skullservant
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 16575
Joined: Wed Dec 28, 2011 12:55 am

Re: Let's see your PEDAL BOARD!

Post by skullservant »

YESSSSS NEON COLORS!!
User avatar
breitnersn
committed
committed
Posts: 201
Joined: Wed Jan 25, 2012 3:56 pm
Location: Alt-Treptow

Re: Let's see your PEDAL BOARD!

Post by breitnersn »

hbombgraphics wrote:clean to distorted trem sounds awesome

Loop gate sounds like a cool pedal to give dirt a clean blend or to blend two types of dirt, I almost had your setup traced out because of those sweet colored cables, but thanks for the explanation, loving the board


question, do you run a buffer somewhere on it?


The colored cables help to trace the signal flow while checking out setups. I will replace them with lava cables as soon as I'm satisfied with the pedal order. I think I'm getting closer...

You can't blend with the Loop Gate. It only offers a square wave for the alternation between "dry" signal and loop. Several wave forms, intensity or tap tempo would be killer.

The Loop Gate has a switchable buffer. I still don't get the physics of buffers. So I don't know if it acts only on the loop or the whole setup. Do you? In the end the dirt pedals seem not to be harmed in their function. At the moment this is a bedroom board. So I don't care too much about signal loss. Could be that I need to think about a quality buffer if I get to play in a band.

Edit: The Quantum Leap can also switch between true bypass and buffer for trailed delays. I actually don't know how it is setup at the moment :facepalm: I will check this later.

You have an impressive board!
User avatar
hbombgraphics
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 8654
Joined: Tue Aug 17, 2010 2:39 pm
Location: Central NY

Re: Let's see your PEDAL BOARD!

Post by hbombgraphics »

Thanks man
If the qantum leap has a buffer it is probably a good one.

I imagine the loop gate buffer works on the unaffected signal too. That just makes sense to me


Really like your setup. Para eq. Is a flipping awesome tone shaper
Gunner Recall wrote:This thread is bad and everyone in it should feel bad.
Iommic Pope wrote:This thread is mediocre at best, but I encourage everyone posting in it to feel as awesome as possible.
https://soundcloud.com/hbombgraphics
User avatar
breitnersn
committed
committed
Posts: 201
Joined: Wed Jan 25, 2012 3:56 pm
Location: Alt-Treptow

Re: Let's see your PEDAL BOARD!

Post by breitnersn »

Yep. The QL buffer should be high quality. I guess the Loop Gate buffer is also a good one. One would be enough anyway.

I used to have an MXR 10 band EQ. The world is so much better with a parametric EQ...
User avatar
hbombgraphics
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 8654
Joined: Tue Aug 17, 2010 2:39 pm
Location: Central NY

Re: Let's see your PEDAL BOARD!

Post by hbombgraphics »

yeah I had a KFK and then switched to the empress, now its just a few presets in the M5 when I need some EQ
Gunner Recall wrote:This thread is bad and everyone in it should feel bad.
Iommic Pope wrote:This thread is mediocre at best, but I encourage everyone posting in it to feel as awesome as possible.
https://soundcloud.com/hbombgraphics
User avatar
Spook Strickland
interested
interested
Posts: 14
Joined: Mon Sep 09, 2013 4:04 am
Location: Washington Coast
Contact:

Re: Let's see your PEDAL BOARD!

Post by Spook Strickland »

Here is my Pedal Board. I'm too cheap to buy a store bought one so I made this one out of Old Bed Slats and some Wood Screws. My Effects are: Phase 90, Boss CE2 Chorus, Homemade Boost Pedal, Homemade Fuzz, A Dano Chili Dog Octave, A Cry Baby and a Homemade Loop Switcher made out of a Ford Valve Cover.

Image
User avatar
skullservant
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 16575
Joined: Wed Dec 28, 2011 12:55 am

Re: Let's see your PEDAL BOARD!

Post by skullservant »

That loop switcher rules!!
User avatar
greyscales
IAMILF
IAMILF
Posts: 2101
Joined: Thu May 24, 2012 7:07 pm
Location: Tampa
Contact:

Re: Let's see your PEDAL BOARD!

Post by greyscales »

Image

Bass pedalboard v2-ish

First board that hasn't changed in a long, long time. Just perfect for my current needs.
Also doubles for my guitar board, but I usually like a couple more pedals. Would love another Nano for dedicated utility pedals (looper, tuner, splitter).
User avatar
hbombgraphics
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 8654
Joined: Tue Aug 17, 2010 2:39 pm
Location: Central NY

Re: Let's see your PEDAL BOARD!

Post by hbombgraphics »

is the expression pedal for the elements?

also: that valve cover looper is one of the coolest things to ever happen ever
Gunner Recall wrote:This thread is bad and everyone in it should feel bad.
Iommic Pope wrote:This thread is mediocre at best, but I encourage everyone posting in it to feel as awesome as possible.
https://soundcloud.com/hbombgraphics
User avatar
greyscales
IAMILF
IAMILF
Posts: 2101
Joined: Thu May 24, 2012 7:07 pm
Location: Tampa
Contact:

Re: Let's see your PEDAL BOARD!

Post by greyscales »

hbombgraphics wrote:is the expression pedal for the elements?


Yep! It controls the mix, very useful for bass. I usually don't like clean blends but the Elements sounds pretty good with it. Not that it lacks bass by any means.
Isher
involved
involved
Posts: 58
Joined: Wed Aug 15, 2012 9:51 pm

Re: Let's see your PEDAL BOARD!

Post by Isher »

As of last band practice.

Goes, Bass -> LS-2 set on A-B Mix

Loop A -> Para Driver, used for clean to and to keep lows when the dirt is kicked on.
Loop B -> Brassmaster -> Guv'nor -> Whammy -> PD-7 (Used on Clean) -> Tri-AC -> Delay.

Then the LS-2 goes out to the DI.

The Chorus is just there. It never gets used, hopefully that will change soon if I get another one.
Last edited by Isher on Mon Sep 09, 2013 10:54 pm, edited 1 time in total.
User avatar
skullservant
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 16575
Joined: Wed Dec 28, 2011 12:55 am

Re: Let's see your PEDAL BOARD!

Post by skullservant »

:thumb:

Image
Post Reply