here's the info I got on it so far.
In terms of specs, the Faye's Her has two independent circuits based
on the Faye Sing, each with the following controls:
-the four Faye Sing knobs: Rate, Range, Resonance, Balance
-an additional range control for the upper limit of the LFO sweep to
compliment the standard Range's control of the lower limit
-Sine/square/manual sweep switch
-Fast/slow switch
-4/6/8 stage switch
In addition, there's a toggle for the second phase circuit to use its
own LFO rate, sync to the first, or sync to the reverse of the first.
So, that's 10 knobs, seven switches, plus the footswitch on the pedal
itself. On top of that, there are jacks for stereo in/out that allow
for series or parallel circuit routing when run in mono.
There will also be two external controllers available. One has two
footswitches for individual toggling of the phase circuits as well as
CV/Exp inputs for rate control or manual sweep. The other has the two
footswitches along with two attached treadles for rate control/manual
sweep. The CV/Exp inputs will also be available on the Faye's Her
chassis itself for a small fee to suit those that need CV but not
external switching.
The price is going to fall in the $400 +-50 range, including a power
supply. I can't quote the exact number until the final prototype is
ready, though, which is also why I'm not running preorders yet. When
everything's ready, information and pricing will be available at least
a day before preorders open so nobody gets stuck at the end of the
preorder line because they were working or sleeping when the
announcement goes up.
should be landing soon!!!!
