Gasalcoholics anonymous? whoever said this was a help group?

[BlindtoFaith]

I thought those were based on the Big Muff? I don't have a lot of money and I enjoy building pedals so I'm just going to make myself one. I'm checking out the PigeonFx stuff and their Supa Fuzz "kit" looks really cool. I think I'm gonna get one.

Scarab Deluxe



This is a "Deluxe" version of the Scarab with more control over "feel" and adjustments in bias.

This version adds in a couple knobs over the 3 knob version.

Read the Scarab description below for the main attributes.

BIAS:
Tonebender type circuits vary depending on the bias of the 3rd transistor. Gritty gated tones on one end of the dial, sustaining lead tones in the middle and sweet lower gain tones at the other end of the rotation. Bias affects tone and gain.

FAT:
The low end at the input of the circuit affects fuzz amount and saturation. The feel of the pedal can be adjusted from a saturated slower responding "fat fuzz" to a snappy, fast responding, slightly less gain fuzz that has the feel of a distortion or overdrive. This helps dial in a single coil to be fat or a humbucker to clear up a bit and be more senitive to dynamic picking.

[Zounds Perspex]

Box Of War kills, btw. This is a Muff I can love!

[behndy]

woof. i KNOW. Matt at Wren & Cuff just builds some ANGRY stuff doesn't he?

the awesome pedal store near me asked what are some fuzzes and stuff to check out, i brought in a bunch of loot and left it for a weekend for them to play with. when i picked up the stuffs they said they'd be carrying W&C because the PPB sounded GREAT and they had 2 people ask to buy it while they were playing around with it.

they can't keep the stuff in stock. good shits.

[Moustache_Bash]

^^ the best way would probably be to take a DMM and measure each trimpot and make a note so you can set it back exactly how it was if you want.

Could you possibly explain a little more? Like, would I want to measure the voltage drop across the trimpots?

[Kellanium]

^^ the best way would probably be to take a DMM and measure each trimpot and make a note so you can set it back exactly how it was if you want.

Not as easy as it sounds, you'd have to measure the voltage drop and know where the trimmer would go to get that exact voltage. To measure resistance requires disconnection of the component in question from the circuit otherwise the DMM will measure the entire circuit's DCR.

[bronzetalon]

Out: Valve Klipper

Incoming: These boys (the silvery guy is a fuzz face with a input cap blend)

[MaxMaps]

Out: Valve Klipper

Incoming: These boys (the silvery guy is a fuzz face with a input cap blend)

I think that's a fair trade.

Is that a Spooky Tooth FF?

[bronzetalon]

Naw it was done by a guy here on the boards.

[devnulljp]

^^ the best way would probably be to take a DMM and measure each trimpot and make a note so you can set it back exactly how it was if you want.

Not as easy as it sounds, you'd have to measure the voltage drop and know where the trimmer would go to get that exact voltage. To measure resistance requires disconnection of the component in question from the circuit otherwise the DMM will measure the entire circuit's DCR.

It's really finnicky and I've seen so many cool old delays completely fucked because people think they're going to get 120 ms delay time out of a DM-2 for example, and all that happens is it now goes PING! behind every distorted delayed note. I think it's worse with analog delays, and I know your Digitech is digital, but it's really hard to put the trimpots back exactly where they need to be without an oscilloscope -- I find it hard even with a scope.

[futuresailors]

Out: Valve Klipper

Incoming: These boys (the silvery guy is a fuzz face with a input cap blend)

dibs.

[devnulljp]

Incoming Trace Elliot

Someone nicked my old Trace rig years ago so I'm stoked to get this.

[BlindtoFaith]

Finally got an El Cap back in the stable. Feels good! I feel like I could rock this setup forever and be happy!

[sylnau]

Feels good! I feel like I could rock this setup forever and be happy!

Looking at all your GAS posts... hmmm... I don't beleave you.

[new05002]

yea he moves gear so quick, i doubt it will be any way for any bit of time

[insubordination]

Finally got an El Cap back in the stable. Feels good! I feel like I could rock this setup forever and be happy!

Holy fuck that got there fast! I think your stuff came today but I have been in a library for seven hours, so I don't know for sure.

p.s. flip that El Cap back to me if you need to unload it please. I miss it already.