Could some one help me....
on this circuit. www.home-wrecker.com/bazz.html
the diode 1n914 if it was replaced with a 2m2 resistor with a .0047 cap parallel. what would this produce sound and function wise
also if the .0047 cap was replace with an orange LED what would this produce.....????
hey devi????
working on a design
Moderator: Ghost Hip
Forum rules
The DIY forum is for personal projects (things that are not for sale, not in production), info sharing, peer to peer assistance. No backdoor spamming (DIY posts that are actually advertisements for your business). No clones of in-production pedals. If you have concerns or questions, feel free to PM admin. Thanks so much!
The DIY forum is for personal projects (things that are not for sale, not in production), info sharing, peer to peer assistance. No backdoor spamming (DIY posts that are actually advertisements for your business). No clones of in-production pedals. If you have concerns or questions, feel free to PM admin. Thanks so much!
-
metalmariachi
- IAMILFFAMOUS
- Posts: 3079
- Joined: Sun Nov 26, 2006 6:46 am
- Location: Maryland
Re: working on a design
The led will give you softer clipping
You should get a volume boost with the 2.2m rester, experiment with different values.
Also try different values of caps both in parallel and series with that resister.
you could put a 1m pot and the cap in there which will adjust the resonance of the NFB.
Replace the 100k vol with a 500k for more volume out.
use the 100k pot in series with the 100 k resister from B+ to create a starve circuit.
Ok now you completely built another pedal.
MM
You should get a volume boost with the 2.2m rester, experiment with different values.
Also try different values of caps both in parallel and series with that resister.
you could put a 1m pot and the cap in there which will adjust the resonance of the NFB.
Replace the 100k vol with a 500k for more volume out.
use the 100k pot in series with the 100 k resister from B+ to create a starve circuit.
Ok now you completely built another pedal.
MM
金属マリアッチ
MARIATCHIMETARU
"First we have to make you pretty"
MARIATCHIMETARU
"First we have to make you pretty"
-
23F
- interested
- Posts: 28
- Joined: Mon Dec 22, 2008 12:47 pm
Re: working on a design
Im interested in the 1m pot and cap, what sounds would be produced when the resonance of the NFB is played with? Im trying to figure out how to draw up a schem on paint and post it.....thanks
-
23F
- interested
- Posts: 28
- Joined: Mon Dec 22, 2008 12:47 pm
Re: working on a design
by the way this is just the front end of the unit Im building and the rest i would have to draw....