Let's see your finished DIY projects!



Moderator: Ghost Hip

Forum rules
The DIY forum is for personal projects (things that are not for sale, not in production), info sharing, peer to peer assistance. No backdoor spamming (DIY posts that are actually advertisements for your business). No clones of in-production pedals. If you have concerns or questions, feel free to PM admin. Thanks so much!

Re: Let's see your finished DIY projects!

Postby cosmicevan » Fri Jan 14, 2022 3:18 pm

SO HAWT
•○• cosmically yours •○•
cosmicevan

User avatar
FAMOUS
FAMOUS
 
Posts: 1361
Joined: Tue Feb 12, 2019 9:18 pm
Location: at the edge of oscillation, NY

Re: Let's see your finished DIY projects!

Postby imJonWain » Sat Feb 05, 2022 6:56 pm

"finished" my reworked Epiphone Electar Tube 10 by finally getting a control plate made. Making it open back was a bit of a hackjob but I think I am going to leave it, add character lol. It's single 12ax7 preamp into a SE KT88 output section. I really like the kinda raw trashy distortion of such a simple preamp.


Image

Image

Image

Image
To my lay mind, the lobster's behavior in the kettle appears to be the expression of a preference; and it may well be that an ability to form preferences is the decisive criterion for real suffering.
http://www.TFRelectronics.com
https://oshpark.com/profiles/TFRelectronics
imJonWain

User avatar
FAMOUS
FAMOUS
 
Posts: 1672
Joined: Sun Apr 27, 2014 8:56 pm
Location: Boston Area

Re: Let's see your finished DIY projects!

Postby gila_crisis » Sat Feb 12, 2022 6:20 am

After a long time, it was about time to undust a bit my soldering skills. And here I am with this sweet LAL 88 Oscillo-Fuzz clone!
PCB by Dead End FX, the Switchblade project (big kudos guys!).

I also noticed I have laying around 2 pcbs by Fuzzdog for the Shin-Ei CompanionFuzz and a Univox Square Wave... what will happen if I put these together in the same enclosure in series?!???? :!!!:

7E1E38A9-8571-4DC6-A2ED-F9BC5A5787F4.jpeg
7E1E38A9-8571-4DC6-A2ED-F9BC5A5787F4.jpeg (97.37 KiB) Viewed 2050 times


FD0381D8-CC23-4D55-A6EC-8A2500E64A32.jpeg
FD0381D8-CC23-4D55-A6EC-8A2500E64A32.jpeg (126.57 KiB) Viewed 2050 times
Last edited by gila_crisis on Tue Feb 15, 2022 11:31 am, edited 1 time in total.
gila_crisis

User avatar
experienced
experienced
 
Posts: 665
Joined: Wed Apr 24, 2013 1:37 pm
Location: Switzerland

Re: Let's see your finished DIY projects!

Postby LaoWiz » Mon Feb 14, 2022 11:33 pm

So much awesome stuff on these last few pages. I am going to have to try one of those LAL 88 Oscillo-Fuzz boards. When I was first getting into effects that was one I really wanted to buy but went with a DBA fuzz war instead and then got into DIY.

Here's one I finished up this weekend. Since I learned Eagle and figured out how to get boards made at fab houses I haven't etched a PCB in ages. Having a Zonk Machine on breadboard and finally getting it to sound amazing I wanted to get it in a pedal fast so whipped up a board in Eagle for etching last week. The first one came out with the right orientation but with the tracks face side up so I had to do it again. I also didn't have enough clearance between the tracks and the ground plane so fixed that in Eagle and went at it again. Board came out right but still the clearance to the ground plane was pretty close so took a blade and carved around the tracks just in case. Built up the board using lots of mojo parts that I have in my collection from estate sale digs. Didn't fire up and the voltages were off so had to debug. I double checked my schematic to the Zonk machine one I pulled off the web, all good. Checked continuity on all of the parts on the board and everything was connected just right. I was suspicious of a couple of the caps and replaced those. No dice and then busted out my readers that are 3X or so and inspected all of the traces and pads. Found one super super tiny spec of copper that was causing a short to one of the resistors to ground and took the blade to it. Bingo! Fuzz city. Or at least that what I thought. Got it working but it was later in the night and couldn't really crank it too loud. The next day I got to full volume and I just didn't sound as good as the breadboard version which I used to find the best transistor combo. I had made a last minute switcharoo in my transistor configuration and put an OC44 in Q2 and it sounded great on the breadboard but maybe I wasn't playing loud enough that night. Put back in the transistors I was playing for a week that sounded amazing (but a little noise) and it sounds incredible. After over 10 years of DIY I only tried the Zonk a couple of years ago but the board failed and it really didn't sound too impressive but luckily I have a crap load of various GE trannies in my stash and was able to revisit this circuit and it's really quite amazing but was tough to get the right transistor combo. I probably spent 2-3 hours swapping out transistors on the breadboard. Got lots of great sounding variations in fuzz but what I settled on really knocked it out of the park. What a great sounding fuzz. Highly recommended for those who like germanium fuzzes. I have only built a handful of those old circuits - MKII, MKIII, Dizzytone, Buzzaround - love them all but the Zonk seems to have something a little extra special. I have a rotary switch for the input caps and think the second position basically makes it a MKI but I prefer the sizzling 1000pf input cap on the Zonk. Not too bright for me.

Image

Image

Image

Image
LaoWiz

User avatar
Supporter
Supporter
 
Posts: 1945
Joined: Wed Apr 14, 2010 4:03 pm

Re: Let's see your finished DIY projects!

Postby Dandolin » Tue Feb 15, 2022 9:22 am

Luvvit :joy: nice addition to throw the input caps on a rotary :thumb:
I Fuzz
Dandolin

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 10712
Joined: Thu Oct 15, 2009 2:33 pm
Location: On the pharm in PA

Re: Let's see your finished DIY projects!

Postby Chankgeez » Tue Feb 15, 2022 9:42 am

:)*
psychic vampire. wrote:The important take away from this thread: Taoism and Ring Modulators go together?
…...........................…
Sweet dealin's: here
"...a benevolent dictatorship can be O.K. for as long as the benevolence lasts…” - Hardy Green
#GreenRinger
Chankgeez

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 41051
Joined: Tue Oct 11, 2011 1:40 am
Location: youtube.com/watch?v=V-2l7kkBURc

Re: Let's see your finished DIY projects!

Postby LaoWiz » Wed Feb 16, 2022 2:36 pm

Dandolin wrote:Luvvit :joy: nice addition to throw the input caps on a rotary :thumb:


I likely will only use the Zonk machine input cap as I tend to like things more on the bright end but not bad to go a little thicker from time to time :joy:
LaoWiz

User avatar
Supporter
Supporter
 
Posts: 1945
Joined: Wed Apr 14, 2010 4:03 pm

Re: Let's see your finished DIY projects!

Postby LaoWiz » Wed Feb 16, 2022 11:16 pm

Chankgeez wrote::)*


:hug:
LaoWiz

User avatar
Supporter
Supporter
 
Posts: 1945
Joined: Wed Apr 14, 2010 4:03 pm

Re: Let's see your finished DIY projects!

Postby gila_crisis » Sat Feb 19, 2022 6:18 am

Next: this is a Hizumitas clone!
I built it with the shika fuzz pcb by pedalPCB.
I was very curious about this muff variant, and when I saw the pcb I decided to give it a try.
I installed also a mid knob on the tone section, to have a bit more versatility.
It sounds very cool indeed, it's thick and slugdy as a good muff should be and there's a lot of clarity also with the tone knob fully on the bass side.
I also did an AB comparison with my mighty Earthbound Supercollider and.... the SC can be set to sound like the Hizumitas!
There are some different nuances, but they are so close that I think in a live context you won't notice which is which!
There is only one main thing that's amazing about Hizumitas: it has tooooooons of output volume!!!
Unity is already around 9 o'clock, while on the SC it's around 2 o'clock.

19C4D69D-5D03-42D9-8FA0-36AD3659A967.jpeg
19C4D69D-5D03-42D9-8FA0-36AD3659A967.jpeg (138.51 KiB) Viewed 1871 times
gila_crisis

User avatar
experienced
experienced
 
Posts: 665
Joined: Wed Apr 24, 2013 1:37 pm
Location: Switzerland

Re: Let's see your finished DIY projects!

Postby digi2t » Sat Feb 19, 2022 7:02 pm

Decided to build another Dumble, so pedal builds have been slim of late. Did manage to get these two built today while I wait for parts for the amp...

Gnawty. Copy of the Big Tone Brewery Royal Beaver. 'Cuz we all know, too much Muff is never enough. This one goes to 11.

Image

Image

Dekadent. Preamp section of the Peavey Decade mini amp. Apparently, it's a "thing" now.

Image

Image
"Turn down the amp, strum harder." - PRR

http://www.deadendfx.com/
digi2t

User avatar
experienced
experienced
 
Posts: 741
Joined: Sat Jun 09, 2012 7:07 am

Re: Let's see your finished DIY projects!

Postby imJonWain » Sat Feb 19, 2022 7:32 pm

How are you liking the Dumble build you did? Are they worth the hype?
To my lay mind, the lobster's behavior in the kettle appears to be the expression of a preference; and it may well be that an ability to form preferences is the decisive criterion for real suffering.
http://www.TFRelectronics.com
https://oshpark.com/profiles/TFRelectronics
imJonWain

User avatar
FAMOUS
FAMOUS
 
Posts: 1672
Joined: Sun Apr 27, 2014 8:56 pm
Location: Boston Area

Re: Let's see your finished DIY projects!

Postby digi2t » Sat Feb 19, 2022 10:46 pm

imJonWain wrote:How are you liking the Dumble build you did? Are they worth the hype?


Loving it. Built a #183 last winter, and I'm putting together a #124 to compliment it. The things to keep in mind however;

- They tend to be tailor made to a specific tonal taste.
- As such, they are not "swiss army knife" amps.

They do one thing, but they do it better than most, if not all. I still remember the first time I plugged into my 183 and ran it through it's paces, my ears just went "WOW!". The tonal quality, and harmonic content are just off the charts. And this coming from a guy that's never been a big EL34 fan. A lesson I learned from my Traynor YBA-3, I'm running 6CA7's in it, which I find to sound rounder and sweeter, especially in the low end.

For the 124, I'll be using 7581A's, which are my go to for all my 6L6 amps. There are some subtle differences in the preamp section, so I'll be looking forward to hearing the result. The 183 I equipped with Hammond iron, while the 124 will be pumping Edcor iron. This is the first time I'm using Edcor, so another thing I'll be listening out for.
"Turn down the amp, strum harder." - PRR

http://www.deadendfx.com/
digi2t

User avatar
experienced
experienced
 
Posts: 741
Joined: Sat Jun 09, 2012 7:07 am

Re: Let's see your finished DIY projects!

Postby gila_crisis » Sun Feb 27, 2022 4:12 am

Built a second 88 super oscillo fuzz for a friend.
2A64BAD5-9A00-4A71-A168-3193B5FA5BAE.jpeg
2A64BAD5-9A00-4A71-A168-3193B5FA5BAE.jpeg (101.35 KiB) Viewed 1662 times
gila_crisis

User avatar
experienced
experienced
 
Posts: 665
Joined: Wed Apr 24, 2013 1:37 pm
Location: Switzerland

Re: Let's see your finished DIY projects!

Postby Dandolin » Sun Feb 27, 2022 10:34 am

:love: beautiful
I Fuzz
Dandolin

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 10712
Joined: Thu Oct 15, 2009 2:33 pm
Location: On the pharm in PA

Re: Let's see your finished DIY projects!

Postby mcatano » Wed Mar 02, 2022 7:44 pm

Just boxed up this circuit I've been tinkering with for the past couple of weeks on breadboard. Turned out pretty cool, but have to sort out some switch popping...

Image

A sick ms paint block diagram is worth a thousand words...

Image

Because of all the switches and wiring in and out, I figured it would be easier to break everything down into discrete circuit fragments than to try and do one huge vero layout for the whole thing.

Image

The voice switch selects between 3 different resistors to ground in a big muff tone control which gives 3 pretty different EQ plots:

Image
Image
Image
mcatano

committed
committed
 
Posts: 291
Joined: Sat Apr 29, 2017 9:59 am

PreviousNext

Return to DIY Effects



Who is online

Users browsing this forum: No registered users and 0 guests


Sponsored Ad. (Please no inflated/repetitive clicking. Thanks!)



ilovefuzz.com is not responsible for user-submitted content. Users participate at their own discretion and risk.