Let's see your AMP!

[JTurbide]

Wow that EGC + YBA combo

[fuzzonaut]

Got a H&K Bass Master for home noodling, it's perfect!

The routing possibilities.

[Sardocasm]

Newest addition. Such a pretty clean sound to start with that the gross and evil sounds are that much better.

[adamajah]

I just upgraded my stereo amp setup from this finicky 90's Crate to this Imperial. Good god it's sounding

Went to go check it out and the seller turned out to be a nice fella from MW.

[The Eristic]

Yeah, I'd say that's an upgrade! Also I'd looooove to have a Sportsman to go with my Rambler.

This 115LB with EVM15 I snagged from the GC site just showed up, completes my '80s metal box mini-stack with the 408LGS. Now I just need to find a 2100sel head!

[nogodsnobedtimes]

Yeah, I'd say that's an upgrade! Also I'd looooove to have a Sportsman to go with my Rambler.

This 115LB with EVM15 I snagged from the GC site just showed up, completes my '80s metal box mini-stack with the 408LGS. Now I just need to find a 2100sel head!

GK shit is always so sexy

[The Eristic]

Yeah, they've always had a really particular vibe going. The ones with the vaporwave logos (as my student calls them) like that are crazy values, too. They usually have legit Celestion/EV/etc OEM drivers inside but go for next to nothing. I paid ~$100 shipped for that 1x15 and $90 for the 4x8.

[adamajah]

Yeah, I'd say that's an upgrade! Also I'd looooove to have a Sportsman to go with my Rambler.

This 115LB with EVM15 I snagged from the GC site just showed up, completes my '80s metal box mini-stack with the 408LGS. Now I just need to find a 2100sel head!

Yes I was stalking the Sportsman as well before I got the Imperial.

[nad]

I've posted these a few times, but I finally got a chance to see all 4 in the same room. Usually one is at home, another at the rehearsal space, the third with my repair guy, and a fourth shunned in a corner for being naughty. All in varying rotation, depending on their mood.

Speaking of that, the SVT-II crapped out again tonight. Fun while it lasted, alas. Anyhow, when functioning, I run any of them through an Ampeg 8x10" or Bergantino 4x12" cab. I used to go through a pair of Bag End 1x12" cabs but kept blowing speakers. GEE I WONDER WHY.

[nogodsnobedtimes]

Yeah, they've always had a really particular vibe going. The ones with the vaporwave logos (as my student calls them) like that are crazy values, too. They usually have legit Celestion/EV/etc OEM drivers inside but go for next to nothing. I paid ~$100 shipped for that 1x15 and $90 for the 4x8.

Damn dude, for real?!

How does the 4x8 pair with the 1x15? That's a set up I always wanted to try, but never made it happen.

[The Eristic]

With the EV and small ported box, it's a fairly tight and balanced 15" that isn't really performing sub duties (it only goes down to 50hz in a TL606, and this box is much smaller), so it hangs surprisingly well with the super fast 8"s. I think I want to move it to the top, though, to see if its midrange will hit the ear a little better.

[KingNed]

So my setup is a bit weird. It's two 9.5" rack preamps I built running into a stereo power amp (QSC RMX1450) into two cabs - a Blackstar Artisan 2x12 with V30's and a Peavey Black Widow 1x15. The Peavey sounds a bit muffled to me so I might get something different at some point.
The two preamps are emulations of a Model-T and a Marshall Super Lead. This is an all solid state setup. Housed in a custom 3u rack case built by Zilla cabs.

[BetterOffShred]

Pretty rad

[hbombgraphics]

So my setup is a bit weird. It's two 9.5" rack preamps I built running into a stereo power amp (QSC RMX1450) into two cabs - a Blackstar Artisan 2x12 with V30's and a Peavey Black Widow 1x15. The Peavey sounds a bit muffled to me so I might get something different at some point.
The two preamps are emulations of a Model-T and a Marshall Super Lead. This is an all solid state setup. Housed in a custom 3u rack case built by Zilla cabs.

This is killer looking,

Did you build the preamps from a kit?

I used to run something similar but I ran a preamp into a kustom PA head, yours looks much cooler and more reliable.

[KingNed]

This is killer looking,

Did you build the preamps from a kit?

I used to run something similar but I ran a preamp into a kustom PA head, yours looks much cooler and more reliable.

Not a kit per-say. It was my own concept of execution, but the circuit boards are a GuitarPCB Sunn-T (with a JFET buffer before the volume pot), and a Runoffgroove Thunderbird on a PCB by 1776 effects. I bought the components and populated them myself. They're meant to be built in regular pedal enclosures but I wanted them in a rack configuration. I guess they're not proper 'preamps' as the output impedance isn't exactly what you'd get from a 'real' one but they sound great regardless.
The cases I bought are from a UK company called Allmetalparts.co.uk. They do this range of 'half rack' cases in various sizes and configurations. I just bought two of the most basic ones with blank panels, marked out the holes I needed, and took them to a metal workshop where they drilled the holes for me. Wired them both up in a day and then gigged it the next night.