Can we talk about modular synths?

MrNovember · Post by **MrNovember** » Mon Oct 23, 2017 9:39 pm

Dark Barn wrote:Ah man, I got 4 free knurlies with a module. They look so good but I’m afraid to open up the baggie and fall in love. How much do they cost MrNovember? I used to ignore them because my case was 4-40, now I’m m3...

I mean considering they're just screws, they're pretty damned expensive! $40USD for a pack of 100 on Perfect Circuit, which is like 4x to 10x the cost of any other screw on their site! That being said, they're a little more than "just" screws; the convenience of being able to finger tighten them and the included washers are phenomenal and totally worth it in my books

Dark Barn · Post by **Dark Barn** » Mon Oct 23, 2017 9:53 pm

Ahhhh! It’s so tempting!

behndy · Post by **behndy** » Mon Oct 23, 2017 9:58 pm

murph. i just counted and it's 126 screws on the rack i want to do. that's $80 on screws, compared to the $9 i spent on about 150 each silver and black hex screws. those Knurlies ARE sexy though. someday mebbe.

also, the Malekko Gate Delay looks DOPE.

popvulture · Post by **popvulture** » Mon Oct 23, 2017 11:10 pm

dozicusmaximus wrote:I saw someone here was possibly interested in the RCD. I have one and the Expander if your interested and in the US.

Haha I was, but you can blame Behndy for getting me thinking about Pamela

oscillateur · Post by **oscillateur** » Tue Oct 24, 2017 1:14 am

I kinda want a Rings now, I've been playing the modular physically through my Mikrophonie (and I have the Kommander + quNexus in addition), and Rings would be perfect to do this a bit further. I modified my 7U planning/adjustments (the case is full but I want to change some modules bit by bit)...

I'm also going to get a Digiverb 1U with my 7U softcase when my local retailer gets them next month, I've been using my picoDSP for reverb lately but freeing it for other duties would be nice (and having reverb at other points in each patch's signal chain too).

raj007 · Post by **raj007** » Tue Oct 24, 2017 8:09 am

Ok stop w the elite screw talk. That is waaayyyyyy to bourgeoise for this guy.

It's a god damn screw. I don't care what you say

popvulture · Post by **popvulture** » Tue Oct 24, 2017 8:24 am

Haha yep a damn fine looking screw, but I am not paying for that

And Osc yes the Rings looks amazing, been kinda in love with its sounds for a little bit now, eventually would love to get one. Post some stuff if you get one?

dozicusmaximus · Post by **dozicusmaximus** » Tue Oct 24, 2017 8:45 am

popvulture wrote:
dozicusmaximus wrote:I saw someone here was possibly interested in the RCD. I have one and the Expander if your interested and in the US.
Haha I was, but you can blame Behndy for getting me thinking about Pamela

Ahh, ok. Yeah, that's what I replaced it with haha.

Ruiner · Post by **Ruiner** » Tue Oct 24, 2017 9:21 am

Man, i never want to move stuff because of screws.... ordered the knurlies.

Also, INNNNNNNNNNN

mr. sound boy king · Post by **mr. sound boy king** » Tue Oct 24, 2017 11:26 am

Ruiner wrote:Man, i never want to move stuff because of screws.... ordered the knurlies.

Also, INNNNNNNNNNN

That thing looks super rad. Look forward to a report on how you like it.

baremountain · Post by **baremountain** » Tue Oct 24, 2017 11:39 am

popvulture wrote:And Osc yes the Rings looks amazing, been kinda in love with its sounds for a little bit now, eventually would love to get one. Post some stuff if you get one?

Got mine in yesterday!!!
I spent a little time with it as an osc and *very* little time with it as a processor. It's super gorgeous. Immediately I was able to get a pure Rhodes tone without any of the clackiness of the mallet. I've got a short clip on my instagram story (@EvanGordon) you can see for the next ~12 hours, but I'll post a longer one that'll stick around soon enough!

popvulture · Post by **popvulture** » Tue Oct 24, 2017 12:02 pm

baremountain wrote:
popvulture wrote:And Osc yes the Rings looks amazing, been kinda in love with its sounds for a little bit now, eventually would love to get one. Post some stuff if you get one?
Got mine in yesterday!!!
I spent a little time with it as an osc and *very* little time with it as a processor. It's super gorgeous. Immediately I was able to get a pure Rhodes tone without any of the clackiness of the mallet. I've got a short clip on my instagram story (@EvanGordon) you can see for the next ~12 hours, but I'll post a longer one that'll stick around soon enough!

Dude, that's awesome! Sounds like upright bass! I fucking looooove that plucky sound I've heard coming out of the Rings, makes me wanna just disappear in to a cave of wanna be Steve Reichness and never come out.

behndy · Post by **behndy** » Tue Oct 24, 2017 2:52 pm

ALWAYS. LOVE. RINGS.

also, E950 should be here Thursday. so excite. much much.

iiiiii love the Troika but she's just too big (giggety). i think i'm going to swap her for an E950, Twin Waves and Zed3000. same space, more options.

annnnnnnd if i lurv the E950 as much as i think i'm going to, have to figure out how to fit the Expander too. because SO HAWT.

Strange Tales · Post by **Strange Tales** » Tue Oct 24, 2017 2:54 pm

All this Rings love is getting to me because I'm starting to get really tired of mine altogether. I'm getting the same feeling I got with the Telharmonic after a long time with it. The sounds aren't as inventive anymore and anytime I patch it I'm immediately stuck in a rut with everything.

...Anyone want a Rings?

Ruiner · Post by **Ruiner** » Tue Oct 24, 2017 2:56 pm

Strange Tales wrote:All this Rings love is getting to me because I'm starting to get really tired of mine altogether. I'm getting the same feeling I got with the Telharmonic after a long time with it. The sounds aren't as inventive anymore and anytime I patch it I'm immediately stuck in a rut with everything.

...Anyone want a Rings?

Was considering selling my Elements to get a Rings instead..... hmmmm.

ilovefuzz.com

Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?