Let's see your finished DIY projects!

[Invisible Man]

finished this pedal for my nemesis, outer two foot switches go to one 1/4" jack to change presets, middle goes to the other 1/4" and 1/8" jacks for tap tempo for the nemesis and my tremolo.

Read this as though you'd made a pedal for your nemesis (like your enemy). Was thinking that was mighty generous of you...

[jrfox92]

That verb enclosure looks great! You mentioned doing that with spray paint and other tools right?

Yeah, first I spray it black, then splatter paint with several different colors, let dry, cover with tape, cut out shapes, spray a bunch of colors on top of each other (like street artists that do those space paintings), lay crumpled up newspaper on top of it and lift up for the swirly-ish effect.

Very cool. Is it a vertical 1590dd?

Yep.
I did that mostly so I'd have room to screw up.

It's funny, it's a lot quieter than the Reverb Machine is supposed to be, apparently.
I'm gonna try building it without dwell knob next time to see how it differs.

[cherler]

Yeah that's what I thought it looked like, I really like it!

[JonnyAngle]

After BILF I'll post some other stuff I've made recently.

But this was pretty cool. I really like the arcade button in the freeze. I'm not sure that I would like it on a B3k, for example, but it fits well here.

IMG_2440.JPG (42.85 KiB) Viewed 5870 times

[cherler]

I was just looking at a bunch of those buttons on Adafruit after looking at the bananana pedals, you don't feel like it's a little fragile?

[DRodriguez]

Arcade buttons are built to take a beating. You can abuse them pretty hard. The actual mechanism is super simple too, and if for whatever reason it breaks, it's really easy to replace it with a new one.

[cherler]

Arcade buttons are built to take a beating. You can abuse them pretty hard. The actual mechanism is super simple too, and if for whatever reason it breaks, it's really easy to replace it with a new one.

....yeah you right doh

[JonnyAngle]

It's plastic, but the actual switch can go lower than the outer housing so you'd need to literally shank it in order to break it

[cherler]

Oh cool, so if I stood on it like an asshole it would be fine. That's actually exactly what I was worried about haha

[Chuckchuck]

https://imgur.com/gallery/f3ODY
P bass

[tabcantab]

Yeah, I built a MIDI keyboard using arcade buttons I play (clumsily) with my feet which I've posted on here before. The buttons are by far the part I'm least likely to break. My neck, however...

[dminner]

Made this with Mike (flanagan0718 on here, who did the wiring).

[cherler]

[imJonWain]

Cleaned up the wiring inside my Laney AOR a bit, they are kind of a rats nest from the factory. I was surprised how much quieter the amp is now too, it always had a mild but audible constant hum with all the volumes off and now you have to be basically against the speaker to hear it. I also changed the reverb drive and recovery circuits a little bit so I get more of a fendery verb and less hiss but the tank still picks up wicked transformer hum unless I move it a foot or so away....Gotta figure out a plan for that still... I'm also thinking of adding a switch to bypass the effects loop/reverb section (the combos have a buffered effects loop unlike the heads and I ran it without the loop while I was doing the work and really liked the sound, it sounded more "open" and louder to me).

[comesect2.0]

finished frag, 1/8 this time...makes rattles and has a spring..now to test on some peddalll&synthzz.