Let's see your finished DIY projects!

[SoaringTortoise]

The Space Flamingo. Made from a Baldwin Panoramic tone unit spring tank.

[youtube]http://www.youtube.com/watch?v=s93RlX4xfRY[/youtube]

[Ben79]

Love it! What's the circuit? Do you have a schem for us?

[SoaringTortoise]

I used the original Baldwin circuit which I modified with the addition of an .027 uF input capacitor, a dual gange 100K mix control and an output volume control, as well as the switching. I also "upgraded" most of the signal passing caps and I had to build a power supply filter section as I think these units originally relied on the power filtering built into the organ. It was quite noisy without the addition of power filtering caps. I did not draw up a schematic for posterity but below you will find the original Baldwin patent schematic I used for reference.

[SoaringTortoise]

Oh, and I will add that the enclosure is made from wood which came from a salvage Wurlitzer organ.

[crochambeau]

I used the original Baldwin circuit which I modified with the addition of an .027 uF input capacitor, a dual gange 100K mix control and an output volume control, as well as the switching. I also "upgraded" most of the signal passing caps and I had to build a power supply filter section as I think these units originally relied on the power filtering built into the organ. It was quite noisy without the addition of power filtering caps. I did not draw up a schematic for posterity but below you will find the original Baldwin patent schematic I used for reference.

Beautiful work!

Thanks for the document too, love looking at well drafted patent files.

[SoaringTortoise]

I used the original Baldwin circuit which I modified with the addition of an .027 uF input capacitor, a dual gange 100K mix control and an output volume control, as well as the switching. I also "upgraded" most of the signal passing caps and I had to build a power supply filter section as I think these units originally relied on the power filtering built into the organ. It was quite noisy without the addition of power filtering caps. I did not draw up a schematic for posterity but below you will find the original Baldwin patent schematic I used for reference.

Beautiful work!

Thanks for the document too, love looking at well drafted patent files.

Thanks.

As to the patent document I especially like the "Tapered spring reverberation delay line device apparatus".

[nieh]

nothing to exciting, but I built this yesterday to scroll up and down presets on my nemesis without bending over.

[Chankgeez]

Your cat seems sorta impressed.

[nieh]

she seemed more impressed by the nemesis

[LaoWiz]

Finally finished a pedal!

https://postimg.org/image/rmsw9shjt/

[UglyCasanova]

Stunning work as always!

[TheTransient]

5E3 Tweed Deluxe. This was my first amp build. I put together the amp, didnt use a kit. I also built the cabinet. Pretty stoked about it

[crochambeau]

It's beautiful! Can we get gut shot?

[TheTransient]

Theres a thread detailing the entire build process here: http://www.guitargear.net.au/discussion ... ic=47223.0

[jrfox92]

Got around to doing some finishing this Thanksgiving.