PAIA Roctave Divider



Moderator: LaoWiz

PAIA Roctave Divider

Postby LaoWiz » Thu Mar 27, 2014 12:43 am

image.jpg
image.jpg (124.38 KiB) Viewed 5589 times


Here's a proto enclosure for a PAIA Roctktave Divider. Haven't tested the board yet but it provides fuzz, octave down, 2 octaves down, and a rotary switch for several intervals of octave down. It's a huge board in a huge enclosure. I'm gonna test the board tomorrow. Once I finish mine I'll report back. Another beast to behold...
LaoWiz

User avatar
Supporter
Supporter
 
Posts: 1868
Joined: Wed Apr 14, 2010 4:03 pm

Re: PAIA Roctave Divider

Postby nevada » Thu Mar 27, 2014 12:59 pm

Heavy!
Good deals with PumpkinPieces, hazelwould, PetZounds, Steelyeye, DannDubbleEwe (x3), skullservant (x3), ChetMagongalo, leaves turn, Helter, EvilCatBucky, OddKnowledge, vanderholm, Phengren Oswald, Uncle Grandfather, decomposing, MrNovember, multi_s (x2), smallsoundbigsound (x2), Dandolin, Strangle Tales who is a good dude
nevada

User avatar
experienced
experienced
 
Posts: 760
Joined: Mon Sep 09, 2013 2:09 pm
Location: Cleveland

Re: PAIA Roctave Divider

Postby skullservant » Thu Mar 27, 2014 1:01 pm

Stoked to see yours come together! Let me know what it was on that PCB!
DIRGE ELECTRONICS.
90+ good dealings: HERE

cobascis wrote:pre-wedding dirge is vintage dirge

spacelordmother wrote: ILF DIRGE KVLT
skullservant

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 16556
Joined: Wed Dec 28, 2011 12:55 am
Location: BALTIMORE

Re: PAIA Roctave Divider

Postby intothegroove » Thu Mar 27, 2014 1:21 pm

:drool: :love: :joy: :omg: :!!!: I'm sure it's going to rip some heads off! Awesome!
intothegroove

User avatar
FAMOUS
FAMOUS
 
Posts: 1669
Joined: Thu Jul 08, 2010 6:05 pm
Location: The Junction

Re: PAIA Roctave Divider

Postby LaoWiz » Thu Mar 27, 2014 1:32 pm

skullservant wrote:Stoked to see yours come together! Let me know what it was on that PCB!


I felt lazy to debug so I etched another board. Gonna debug that on in the future!
LaoWiz

User avatar
Supporter
Supporter
 
Posts: 1868
Joined: Wed Apr 14, 2010 4:03 pm

Re: PAIA Roctave Divider

Postby skullservant » Thu Mar 27, 2014 2:05 pm

Sweeeet!
DIRGE ELECTRONICS.
90+ good dealings: HERE

cobascis wrote:pre-wedding dirge is vintage dirge

spacelordmother wrote: ILF DIRGE KVLT
skullservant

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 16556
Joined: Wed Dec 28, 2011 12:55 am
Location: BALTIMORE

Re: PAIA Roctave Divider

Postby jrmy » Fri Mar 28, 2014 1:56 pm

Duuuuuuude... so is this going to be an ongoing offering? Maybe?
I'm more like a mids-ist than a bassist.
"The main rule on ILF is don't be an asshole." - Tom Dalton
I can't wait to annoy the shit out of you with my mountain of mids. - bigchiefbc
https://thewirechimes.bandcamp.com/releases
http://crotchthrottle.bandcamp.com/
https://www.instagram.com/jrmyfuzz/
jrmy

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 10603
Joined: Fri Mar 21, 2008 11:09 am

Re: PAIA Roctave Divider

Postby LaoWiz » Fri Mar 28, 2014 3:38 pm

jrmy wrote:Duuuuuuude... so is this going to be an ongoing offering? Maybe?


Yes, definitely. I just 5 minutes ago debugged mine and its now fully functional. Pretty awesome. Lots of sounds. I'll need to upload or link to the original PAIA article. A couple of mods have been added so far and there's one other that I'm going to try. Will add up the parts and come up with price.

Skully, after some head scratching I found where my signal was dropping out. On your board and my new one we had a diode oriented the wrong way. From tracing the schematic I discovered this so the board you sent me may functional once that's fixed.....
LaoWiz

User avatar
Supporter
Supporter
 
Posts: 1868
Joined: Wed Apr 14, 2010 4:03 pm

Re: PAIA Roctave Divider

Postby skullservant » Sat Mar 29, 2014 9:01 am

Wuuuuuuuuuuuut. At least you were able to figure it out! Thats awesome!!
DIRGE ELECTRONICS.
90+ good dealings: HERE

cobascis wrote:pre-wedding dirge is vintage dirge

spacelordmother wrote: ILF DIRGE KVLT
skullservant

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 16556
Joined: Wed Dec 28, 2011 12:55 am
Location: BALTIMORE

Re: PAIA Roctave Divider

Postby LaoWiz » Sun Mar 30, 2014 5:25 pm

Original Craig Anderton PAIA Roctave Divider article via Mark Hammer:

http://hammer.ampage.org/files/rocktave.pdf
LaoWiz

User avatar
Supporter
Supporter
 
Posts: 1868
Joined: Wed Apr 14, 2010 4:03 pm

Re: PAIA Roctave Divider

Postby LaoWiz » Sun Mar 30, 2014 5:34 pm

image.jpg
image.jpg (154.22 KiB) Viewed 5500 times
LaoWiz

User avatar
Supporter
Supporter
 
Posts: 1868
Joined: Wed Apr 14, 2010 4:03 pm

Re: PAIA Roctave Divider

Postby Chankgeez » Sun Mar 30, 2014 5:36 pm

Nice. Super cray.
"You can't copyright circuits really." - Ed Sanner …………….0.............
"The effects market was really nothing more than a bunch of beggars and thieves, all building off one another's work." - Dan Armstrong…...........................…
Sweet dealin's: here
"...a benevolent dictatorship can be O.K. for as long as the benevolence lasts…” - Hardy Green
#GreenRinger
Chankgeez

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 38774
Joined: Tue Oct 11, 2011 1:40 am
Location: youtube.com/watch?v=V-2l7kkBURc

Re: PAIA Roctave Divider

Postby LaoWiz » Sun Mar 30, 2014 5:47 pm

image.jpg
image.jpg (174.7 KiB) Viewed 5455 times


All done. If anyone wants these, I will most likely add text for the controls and toggles and church up the rotary art some.

I've added a toggle to switch between stock Rocktave and the modded version which offers several divided intervals via the rotary control up top. There's also a toggle that adds a cap to the compander that gives a kinda gross brassier blown out sound. Probably will add one more switch for another mod to alter the envelope of the divided sounds' envelope decay.

These will be $175 shipped CONUS.
LaoWiz

User avatar
Supporter
Supporter
 
Posts: 1868
Joined: Wed Apr 14, 2010 4:03 pm

Re: PAIA Roctave Divider

Postby skullservant » Sun Mar 30, 2014 6:05 pm

Awesome!!!
DIRGE ELECTRONICS.
90+ good dealings: HERE

cobascis wrote:pre-wedding dirge is vintage dirge

spacelordmother wrote: ILF DIRGE KVLT
skullservant

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 16556
Joined: Wed Dec 28, 2011 12:55 am
Location: BALTIMORE

Re: PAIA Roctave Divider

Postby intothegroove » Sun Mar 30, 2014 8:26 pm

UNREAL!!! :omg: :!!!: :drool: :love: :animal:
intothegroove

User avatar
FAMOUS
FAMOUS
 
Posts: 1669
Joined: Thu Jul 08, 2010 6:05 pm
Location: The Junction

Next

Return to The Out Sound



Who is online

Users browsing this forum: No registered users and 1 guest


Sponsored Ad. (Please no inflated/repetitive clicking. Thanks!)

Advertisements help support ILF


ilovefuzz.com is not responsible for user-submitted content. Users participate at their own discretion and risk.