Fri Aug 16, 2019 12:00 am
Fri Aug 16, 2019 12:11 pm
hotfat wrote:(edited) Something that I found that sounds like it *may* be part of what you're describing is that the number of repeats associated with the "P1, 2 and 3" of an "Nx" may be turned up and possibly at the same pitch without having them spread out using the "Delta" (triangle) knob. When the repeats are "stacked up" rather than staggered or spread out, their volume is additive so that each iteration makes it louder. If you have all 16 iterations (turning the REP knob to max) piled on top of each other it can be really loud. I don't know if this is clear ... I hope so. The Repeats can't really be heard as such without having Delta turned up so that the individual repeats are spaced out in time. This really confused me at the start.
Fri Aug 16, 2019 12:38 pm
cosmicevan wrote:Makes perfect sense and I've experienced that at times as well, but mostly I experience audio cancellation when I have too much going on. When I will have N2 up with some repeats and then try to bring N3 up (I like to set up the repeats and space between and all that jazz before raising the gain so it fades in as madness), I won't hear N3 at all until I start lowering N2. Usually this results in a really obvious jump in the music as N2 and N3 are usually pretty different from each other so N2 will suddenly cut out and N3 will start playing (usually with a volume jump because I've cranked the gain on N3 and it doesn't show up until I fade N2 to almost off).
Thu Aug 22, 2019 10:33 pm
Fri Aug 23, 2019 12:19 am
Fri Aug 23, 2019 10:16 am
multi_s wrote:All the parameters in the N parenthesis on the control layout are unique to each layer.
Load/save is global, the record mode is global. The timing controls with N1 selected control the beat clock, the tempo controls with N2 or N3 are jsut for that layer but are calculated based on the master beat clock.
Fri Aug 23, 2019 12:13 pm
Tue Aug 27, 2019 3:43 pm
Tue Aug 27, 2019 4:02 pm
Tue Aug 27, 2019 4:17 pm
cosmicevan wrote:Curious if there is a way to set the device to default settings as when first powered up? I would like a way to quickly return to default settings after working w a loop. If I set a preset after powering on, will that work or the preset will align the knob settings when clicked?
Still curious about recommended default settings for knobs and if I need to set them for all the Ns individually or if there is a quick way to reset every N.
Thu Aug 29, 2019 7:51 pm
multi_s wrote:Not sure what you mean by "Still curious about recommended default settings for knobs" though
Sun Sep 01, 2019 9:29 pm
Mon Sep 16, 2019 7:38 pm
Tue Sep 17, 2019 6:31 pm
cosmicevan wrote:The stride function is the single greatest thing of all time. That is all.
Wed Sep 18, 2019 1:01 pm