Rattle Can Refin Project: Finished!

[JonnyAngle]

Bought a totally ducked guitar.

It's a yamaha EGV103C in Red. the finish has lots of dings. Here I will document the progress

https://reverb.com/item/32123420-yamaha ... c-red-rare

The above link is the victim.

https://www.amazon.com/dp/B01KG7ILCA/re ... UTF8&psc=1

i'm thinking turquiose sparkle

[JonnyAngle]

160D4833-4BA3-4F6A-8ABE-0BD6EA2F8DE7.jpeg (91.69 KiB) Viewed 6760 times

Oof. That paint is basically glitter and rubber cement. Does not come out evenly at all

Need a new paint. I want something with some depth, not a solid color.

[JonnyAngle]

guitar was delivered today/ will check the actual condish tonight

[Achtane]

Oh nice! I love these guitars.
I had good results with spraying the green glitter Rust-Oleum over a green base coat, but I had to return 2 cans that were totally clogged up or had no propellant
Looked like ass until the clear coat went on though.

[JonnyAngle]

Oh nice! I love these guitars.
I had good results with spraying the green glitter Rust-Oleum over a green base coat, but I had to return 2 cans that were totally clogged up or had no propellant
Looked like ass until the clear coat went on though.

Pics!!!!!???!?!??!!

[JonnyAngle]

think I'm going to go with the metallic green krylon instead.

[coldbrightsunlight]

Looking forward to pics of this.

[Achtane]

Oh nice! I love these guitars.
I had good results with spraying the green glitter Rust-Oleum over a green base coat, but I had to return 2 cans that were totally clogged up or had no propellant
Looked like ass until the clear coat went on though.

Pics!!!!!???!?!??!!

Not the best pic, but this is all I have right now. I was really surprised by how well it turned out. I left the can in some hot water for a few minutes before spraying, and just dusted it on. It runs easily if you spray very much on there.
It took 2 cans of clear coat and I still sanded into a few pieces of glitter. But overall it's pretty rad.

[JonnyAngle]

that looks sick!

the thing with clear is you have to do light coats because it's very watery. If it's too thick it will just drip off to the lowest point

[Achtane]

Thanks!
Yeah. It took a lot of fucking up over a long period of time to realize that you really aren't supposed to spray much on at any one time

[JonnyAngle]

Update on my project:

The neck was cracked upon arrival. So i glued that back together, polished the frets, fixed the wiring and put some new strings on it.

I have a few smaller projects to finish up around the jack shack and then I’ll get to it!

[JonnyAngle]

Got it all stripped down primed and first coat
Of
Paint on

3291D27A-D6B3-4A27-BA43-10C6E0101434.jpeg (72.84 KiB) Viewed 5544 times

[coldbrightsunlight]

oooooo. Love this body shape

[Paul_C]

At one time, I had sixteen of the similarly-shaped basses

I do have pictures to prove it, but don't want to spoil this thread.

[adamajah]

Got it all stripped down primed and first coat
Of
Paint on

3291D27A-D6B3-4A27-BA43-10C6E0101434.jpeg

Greeeen! Yes. Looking forward to seeing this come along