Fri May 11, 2018 3:38 pm
Fri May 11, 2018 9:29 pm
Fri May 11, 2018 9:38 pm
Sat May 12, 2018 12:37 am
Sat May 12, 2018 7:28 am
Sat May 12, 2018 7:30 am
Sat May 12, 2018 8:28 am
Sat May 12, 2018 10:58 am
Sat May 12, 2018 12:11 pm
Chankgeez wrote::lol: Was gonna comment on it earlier. Can't really decide what I'd do.
I like it other than the chiseling. That pickguard's gotta go though.
adamajah wrote:I like what you did to the horn. I'd leave the shape alone now, but ditch the bad relic job look. Sticker it up, and/or paint that baby pink. The mirror pickguard could work if you vandalize it somehow.
goroth wrote:Or less stupidly.
Goldfoils.
Or wind your own.
imJonWain wrote:You need to sand or use a heat gun to get the finish off.
Sat May 12, 2018 12:32 pm
gnomethrone wrote:Visual: Just spray slime green over the body as is and do one coat of matte black paint on the pick guard so as you play it your pick scrapes will be reflective.
Guts: got any pickups laying around? Also carve out more room under the pickguard and put a delay in there so you can either twist a knob to change delay time or mash an arcade button as tap tempo and make sweet laser noises.
Tue May 15, 2018 5:33 pm
Sun May 20, 2018 12:55 pm
BetterOffShred wrote:Fill those ruts with some titebond and sawdust and sand flush when dry it's only a Squire but no point in tempting a cracked pocket. I think some rudely obnoxious color pattern and arcade buttons could be dope too for sure
Sun May 20, 2018 1:05 pm
Jero wrote:
what if I did one of my "drip" finishes on the pick guard...coming out the pickup holes!
Sun May 20, 2018 4:50 pm
Mudfuzz wrote:BetterOffShred wrote:Fill those ruts with some titebond and sawdust and sand flush when dry it's only a Squire but no point in tempting a cracked pocket. I think some rudely obnoxious color pattern and arcade buttons could be dope too for sure
Titebond while a great glue that I use all the time is IMOP not the best application for that as the way it is suppose to be used to dry properly, epoxy or superglue work better because that will dry harder and are easier to sand smooth and finish over later.
I think you should wait it pink and green, put a music master bass bridge on it, put a single SD invader in the middle spot and tune it tenor
Chankgeez wrote:Jero wrote: what if I did one of my "drip" finishes on the pick guard...coming out the pickup holes!
Drap finish is an excellent
Mon Jun 11, 2018 12:39 pm