Baritone Telemaster Build - Fucking Finally



Moderator: Ghost Hip

Re: Baritone Telemaster Build - Phase 1: Planning

Postby CyaNitrate » Sat Sep 05, 2015 11:21 pm

neonblack wrote:I wonder if this body would be more trouble than its worth. There aren't any contours and the holes in the back look crooked.


Not that it matters at this point, but that Wilkinson bridge is both string through and top loading, so unless you were set on through body, the crooked holes wouldn't have mattered. Plug and fill them,sand some body contours, and finish.
jwar wrote:BRO! There is only one order! Bass>fuzz>fuzz>fuzz>fuzz>overdriven amp. :)

goroth wrote:Come up here and fuzz party. Yes. Fuzz party. It is a legit verb.
CyaNitrate

User avatar
experienced
experienced
 
Posts: 882
Joined: Wed Jun 26, 2013 11:24 pm
Location: The Desert

Re: Baritone Telemaster Build - Phase 2: Buying/Waiting

Postby neonblack » Sat Sep 05, 2015 11:37 pm

Yeah, I was just hesitant to take a risk. I'm just a nervous Nelly. :lol:

I'm getting that Wilkinson humbucker bridge for this one. Thanks for showing those to me. Ill definitely remember the other one for any future builds.
neonblack

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 8090
Joined: Fri Feb 28, 2014 12:00 am
Location: Wilmington, NC

Re: Baritone Telemaster Build - Phase 2: Buying/Waiting

Postby CyaNitrate » Sun Sep 06, 2015 4:43 am

Of course! You've got me wanting to build now...
jwar wrote:BRO! There is only one order! Bass>fuzz>fuzz>fuzz>fuzz>overdriven amp. :)

goroth wrote:Come up here and fuzz party. Yes. Fuzz party. It is a legit verb.
CyaNitrate

User avatar
experienced
experienced
 
Posts: 882
Joined: Wed Jun 26, 2013 11:24 pm
Location: The Desert

Re: Baritone Telemaster Build - Phase 2: Buying/Waiting

Postby neonblack » Tue Oct 06, 2015 12:49 am

Hey! This is still happening. Just very slowly, as I predicted.

I have the bari jazzmaster neck in my possession. The body has been so much trouble. One guy backed out on building it, and the other guy is having some trouble with his PayPal account, so he can't take my money, so the build can't continue for the moment. :picard:

Anyways, if it gets worked out, the body will be routed for a single coil neck and a bridge humbucker and I'm pretty sure I'm going to skip the volume and put the tone cap on a switch. Straight riff machine.
neonblack

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 8090
Joined: Fri Feb 28, 2014 12:00 am
Location: Wilmington, NC

Re: Baritone Telemaster Build - Phase 2: Buying/Waiting

Postby CyaNitrate » Wed Oct 07, 2015 12:43 pm

Do you have a volume pedal or a kill switch pedal? Cause if not you might want one with no volume on the guitar.
jwar wrote:BRO! There is only one order! Bass>fuzz>fuzz>fuzz>fuzz>overdriven amp. :)

goroth wrote:Come up here and fuzz party. Yes. Fuzz party. It is a legit verb.
CyaNitrate

User avatar
experienced
experienced
 
Posts: 882
Joined: Wed Jun 26, 2013 11:24 pm
Location: The Desert

Re: Baritone Telemaster Build - Phase 2: Buying/Waiting

Postby neonblack » Wed Oct 07, 2015 12:45 pm

I have a tuner that mutes. I was thinking instead of a volume knob just have a killswitch on the guitar. Not sure yet about all that.
neonblack

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 8090
Joined: Fri Feb 28, 2014 12:00 am
Location: Wilmington, NC

Re: Baritone Telemaster Build - Phase 2: Buying/Waiting

Postby CyaNitrate » Wed Oct 07, 2015 2:00 pm

That'd be cool. The only drawback would be no cleanup, or oscilation control on certain fuzzies, like AB-synth and the like. But I have a feeling those won't be a problem for you.

In the past, I've wired and SG and a Dot Studio for vol/vol, with no tone, cause I always kept it cranked anyways. However, I find myself actually using the tone knobs on my tele and strat.
jwar wrote:BRO! There is only one order! Bass>fuzz>fuzz>fuzz>fuzz>overdriven amp. :)

goroth wrote:Come up here and fuzz party. Yes. Fuzz party. It is a legit verb.
CyaNitrate

User avatar
experienced
experienced
 
Posts: 882
Joined: Wed Jun 26, 2013 11:24 pm
Location: The Desert

Re: Baritone Telemaster Build - Phase 2: Buying/Waiting

Postby neonblack » Wed Oct 07, 2015 2:16 pm

I use the tone either full blast or all the way back and I'm finding that I'd rather flick a switch for control over it.

I didn't think about oscillating fuzzes. I've been meaning to get a volume pedal anyways.
neonblack

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 8090
Joined: Fri Feb 28, 2014 12:00 am
Location: Wilmington, NC

Re: Baritone Telemaster Build - Phase 2: Buying/Waiting

Postby lordgalvar » Wed Oct 07, 2015 2:41 pm

I actually prefer the tone switching too. The switching on my Welson is pretty awesome...two basic sounds (lead/rhythm), then a bass and treble mix or either, and one for either bass or treble in either mode. So like 6 different tone sounds with really different sounds on all of them.

Really neat to see what you come up with man!
-Ring Mods!
"I make you chocolate"
    -comesect69-via-Majin Buu-by-way-of-Dirge/mtl.asm and special consideration from CA Anderton
lordgalvar

User avatar
Supporter
Supporter
 
Posts: 6165
Joined: Fri Nov 14, 2014 5:59 pm
Location: Somewhere between ignore and the OC

Re: Baritone Telemaster Build - Phase 2: Crying/Waiting

Postby neonblack » Mon Oct 12, 2015 5:53 pm

Well this is stalling in the worst way. Took a chance on this guitar builder but it doesn't look good. Even if this body turns out perfect, the communication is so bad you'd think it's a Seppuku brand guitar.

Oh and the money is all tied up so i can't order one of the other guitar bodies I want. FUCK.
neonblack

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 8090
Joined: Fri Feb 28, 2014 12:00 am
Location: Wilmington, NC

Re: Baritone Telemaster Build - Phase 2: Crying/Waiting

Postby skullservant » Mon Oct 12, 2015 6:11 pm

Ah that's shitty dude. I hope it gets sorted out. Can you file a claim?
skullservant

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 16575
Joined: Wed Dec 28, 2011 12:55 am

Re: Baritone Telemaster Build - Phase 2: Crying/Waiting

Postby neonblack » Mon Oct 12, 2015 8:52 pm

Yeah, not through Reverb where I placed the order, but through PayPal. Sucks cause theres a single pickup jag body for like $80+shipping that I would totally jump on if i could
neonblack

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 8090
Joined: Fri Feb 28, 2014 12:00 am
Location: Wilmington, NC

Re: Baritone Telemaster Build - Phase 2: Crying/Waiting

Postby Chankgeez » Mon Oct 12, 2015 9:24 pm

neonblack wrote:… it's a Seppuku brand guitar.


Image
psychic vampire. wrote:The important take away from this thread: Taoism and Ring Modulators go together?
…...........................…
Sweet dealin's: here
"Now, of course, Strega is not a Minimoog… and I am not Sun Ra" - dude from MAKENOISE
#GreenRinger
Chankgeez

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 41887
Joined: Tue Oct 11, 2011 1:40 am
Location: https://www.youtube.com/watch?v=FGhbeHujNZQ youtube.com/watch?v=V-2l7kkBURc

Re: Baritone Telemaster Build - Phase 2: Crying/Waiting

Postby neonblack » Mon Oct 12, 2015 9:40 pm

The SS Bass?
neonblack

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 8090
Joined: Fri Feb 28, 2014 12:00 am
Location: Wilmington, NC

Re: Baritone Telemaster Build - Phase 2: Crying/Waiting

Postby Chankgeez » Mon Oct 12, 2015 9:44 pm

Ja.
psychic vampire. wrote:The important take away from this thread: Taoism and Ring Modulators go together?
…...........................…
Sweet dealin's: here
"Now, of course, Strega is not a Minimoog… and I am not Sun Ra" - dude from MAKENOISE
#GreenRinger
Chankgeez

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 41887
Joined: Tue Oct 11, 2011 1:40 am
Location: https://www.youtube.com/watch?v=FGhbeHujNZQ youtube.com/watch?v=V-2l7kkBURc

PreviousNext

Return to Guitar Tech & Projects



Who is online

Users browsing this forum: No registered users and 8 guests


Sponsored Ad. (Please no inflated/repetitive clicking. Thanks!)



ilovefuzz.com is not responsible for user-submitted content. Users participate at their own discretion and risk.