Mammoth-related discussion of pedal parts, questions, and DIY builds!
Thu Nov 10, 2011 3:12 pm
Jero wrote:jfrey wrote:Here's one I just thought of. Pedal-sized cardboard boxes for diyers to put their builds in. Would be good for shipping/storage.
Yea, I actually need to find a place I can get these in bulk. I know PPP has them for $1 each.
I get mine off ebay
Thu Nov 10, 2011 7:32 pm
Jero wrote:jfrey wrote:Here's one I just thought of. Pedal-sized cardboard boxes for diyers to put their builds in. Would be good for shipping/storage.
Yea, I actually need to find a place I can get these in bulk. I know PPP has them for $1 each.
http://www.uline.com/BL_1407/Kraft-Indestructo-MailersThat's what I use.
5x3x2 for MXR sized, and 4x6x2 for BB. The bigger box is wider than needed (to accommodate extra stuff sticking out the sides-- plus I don't think there's a smaller one that would work).
They're boxes!
Last edited by
McSpunckle on Thu Dec 22, 2011 8:26 pm, edited 1 time in total.
Fri Nov 11, 2011 12:01 am
Thanks fellers!
Mon Nov 14, 2011 12:05 am
photoresistors!!!!!!!!
Mon Nov 14, 2011 5:45 pm
sparkle pink enclosures
Fri Nov 18, 2011 12:29 pm
We've compiled some lists of the suggestions you guys have, and we're filtering through it with our purchasing dpt. Things you'll see very soon:
Clear rubber feet
Pedal Shipping Boxes
Pink, Purple, Copper, and some other powdercoat colors
MAX1044 charge pumps (those are already up)
Vero Board
A bunch of other stuff. And more soon after that!
Fri Nov 18, 2011 12:36 pm
That's awesome.
Fri Nov 18, 2011 5:48 pm
Add to that in the next week:
New Jacks:
Neutrik
Amphenol
Switchcraft
Waterslide Decal Paper
Tue Nov 29, 2011 4:23 pm
It's been said once, but:
Transistor sockets!
Wed Nov 30, 2011 8:57 am
1790NS ENCLOSURES - or equivalent-sized enclosures - commonly used for larger projects like the Meatsphere, 4-knob RAT, Tap-tempo delay, Electric Mistress, Neovibe, and Echo Base.
EDIT:
I looked into the 1590DD and the 1590BB but I couldn't make the standard knob layouts / PCB layout for the above projects work. Blake, if your buyer can find a source for the 1790NS, I think it would fill a much-needed niche.
Thu Dec 08, 2011 11:26 am
I would like to see:
- VeroBoard - cut to size, not just "enclosure specific" --->EDIT--->Nevermind, seems you have that coming soon!
- IC 741
- 22M metal film resistors
- Transistor Sockets - I know it has been mentioned before, but it bears repeating
- Jacks by the "name brands" like Switchcraft, Neutrik, Amphanol - not a deal breaker for me (I think they're overrated myself) but others swear by them
- Custom Drilling options - customer specified drilling layouts, or at least additional options like LED over the footswitch ala MXR style effects
- 500K Rev Audio Taper Pots (16mm Alphas)
- A 1590LB sized enclosure
- LED PCB for easily mounting LED and Voltage Limiting resistor - I have seen these in some Boutique moders work and they make for a very neat final product
- Mod kits for popular pedals - DIYers don't just build them, they mod them too
- WaterSlide Decal Paper - Laser, Inkjet, clear, white
- Some basic DIY tools - esspecially Standard and Metric Uni-Bits (Metrics are hard to find)
In all, I am very please with the selection at Mammoth electronics and the customer support is top notch. The list above is just some things that would make Mammoth all the more a One-Stop-Shop for me and hopefully others.
Keep up the great work.
Mon Dec 12, 2011 1:26 am
i second those 9mm alpha pots.
Sun Dec 18, 2011 1:39 pm
Im glad i found the mammoth electronics site...it has pretty much everything i need for diy effect pedal project...but a few things i did not find on the site below...
-PCB standoff's
-Rubber feet
Thu Dec 22, 2011 8:25 pm
McSpunckle wrote:Jero wrote:jfrey wrote:Here's one I just thought of. Pedal-sized cardboard boxes for diyers to put their builds in. Would be good for shipping/storage.
Yea, I actually need to find a place I can get these in bulk. I know PPP has them for $1 each.
http://www.uline.com/BL_1407/Kraft-Indestructo-MailersThat's what I use.
4x3x2 for MXR sized, and 4x6x2 for BB. The bigger box is wider than needed (to accommodate extra stuff sticking out the sides-- plus I don't think there's a smaller one that would work).
They're boxes!
So, hey! I made an error here... it's 5x3x2 that fits the MXR boxes. Sorry if any (more) of you dudes bought the smaller ones. : /
I fixed the first post.
Sun Jan 01, 2012 7:26 pm
1790NS Enclosures
pot condoms
trimpots in a few more standard values
PCB-mount 3PDT stompswitches
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.