team awesome! fuzzmachine settings - post them here!



Moderator: smallsnd/bigsnd

Re: team awesome! fuzzmachine settings - post them here!

Postby goosekevin » Sun Aug 11, 2013 7:01 am

I fucking love the TAFM so hard Brian
When I am rich and famous I am going to need to buy 5 or so to cop all the tones I want at any time
At the moment really liking some of the lower gain sounds on guitar and then hitting the gate to max out the fuzz :omg:
I love the first setting, for heavy keyboards on bass as well, so thick and full of low end
Rad pedal
Derelict78 wrote:That probably sounds awful in the best possible way.
goosekevin

User avatar
Supporter
Supporter
 
Posts: 2236
Joined: Tue Jul 10, 2012 10:25 pm
Location: NSW Australia

Re: team awesome! fuzzmachine settings - post them here!

Postby chillerthanmost » Thu Oct 10, 2013 1:10 pm

I never knew how awesome the TAFM does low-mid gain fuzz! I usually have the fuzz full blast and set as a huge wall sound but recently I have it set as more of a dirty, low gain fuzz and it sounds SO good! In line before my ABY then into each amp with a Sparkle Motion to one and a Fuck to the other. Re-assured me it's still my favorite fucking fuzz.

Volume switch: dirty
Mids switch: boosted
Clean volume: noon
Fuzz volume: 9pm
Shape: 3pm
Fuzz: 10:45
Input: 11:45 (CCW. Are they all CCW?)

:love:
chillerthanmost

User avatar
Supporter
Supporter
 
Posts: 1134
Joined: Mon May 17, 2010 3:02 am
Location: Salinas, CA

Re: team awesome! fuzzmachine settings - post them here!

Postby blindrabbit » Thu Dec 18, 2014 3:08 pm

This is VERY close to what I had my TAFM set to and used for the same purpose, a low gain OD more so than a fuzz.

Anyway, I just got a Mini yesterday and was tweaking away at it until I got a sound that I liked (which wasn't hard to do), and then I A/B'd between the TAFM with this setting and the Mini...very very VERY close to the point of being tough to tell the difference between the two pedals.

chillerthanmost wrote:I never knew how awesome the TAFM does low-mid gain fuzz! I usually have the fuzz full blast and set as a huge wall sound but recently I have it set as more of a dirty, low gain fuzz and it sounds SO good! In line before my ABY then into each amp with a Sparkle Motion to one and a Fuck to the other. Re-assured me it's still my favorite fucking fuzz.

Volume switch: dirty
Mids switch: boosted
Clean volume: noon
Fuzz volume: 9pm
Shape: 3pm
Fuzz: 10:45
Input: 11:45 (CCW. Are they all CCW?)

:love:
blindrabbit

User avatar
experienced
experienced
 
Posts: 857
Joined: Tue Feb 28, 2012 5:05 pm
Location: Calgary, Alberta, Canada

Re: team awesome! fuzzmachine settings - post them here!

Postby smallsnd/bigsnd » Thu Jan 15, 2015 10:31 am

blindrabbit wrote:This is VERY close to what I had my TAFM set to and used for the same purpose, a low gain OD more so than a fuzz.

Anyway, I just got a Mini yesterday and was tweaking away at it until I got a sound that I liked (which wasn't hard to do), and then I A/B'd between the TAFM with this setting and the Mini...very very VERY close to the point of being tough to tell the difference between the two pedals.


that's pretty interesting considering how different they are, circuit-wise. i guess there's always more than one way to arrive at the same sound...
smallsnd/bigsnd

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 3981
Joined: Sat Nov 29, 2008 12:57 pm

Re: team awesome! fuzzmachine settings - post them here!

Postby blindrabbit » Tue Jan 20, 2015 12:07 am

smallsnd/bigsnd wrote:
blindrabbit wrote:This is VERY close to what I had my TAFM set to and used for the same purpose, a low gain OD more so than a fuzz.

Anyway, I just got a Mini yesterday and was tweaking away at it until I got a sound that I liked (which wasn't hard to do), and then I A/B'd between the TAFM with this setting and the Mini...very very VERY close to the point of being tough to tell the difference between the two pedals.


that's pretty interesting considering how different they are, circuit-wise. i guess there's always more than one way to arrive at the same sound...


Yeah, I thought it was pretty interesting too. Both pedals obviously go places that the other one cannot, but it definitely seems as though they share a range of similarity. The way to tell them apart though (IMO) is that the Mini always seems to sound bassier, and the TAFM always seems to have more note definition.
blindrabbit

User avatar
experienced
experienced
 
Posts: 857
Joined: Tue Feb 28, 2012 5:05 pm
Location: Calgary, Alberta, Canada

Re: team awesome! fuzzmachine settings - post them here!

Postby neonblack » Tue Jan 20, 2015 12:22 am

I have the newest TAFM and I probably use it more than any other pedal.

My settings are:
Fuzz - max
Shape - 10 o-clock
Pregain - zero
Fuzz volume - 10-11 o clock
Clean volume - Noon-ish. Unity.
Mids up
Boost down

I pretty much leave the gate on all the time. Alone, this gives me a very bass-heavy but still defined synthy fuzz. Especially with the tone rolled back on the bass. I also use it to Awesome-ize everything else. I run it last before my delays and everything that runs into it turns...awesome.
neonblack

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 8090
Joined: Fri Feb 28, 2014 12:00 am
Location: Wilmington, NC

Re: team awesome! fuzzmachine settings - post them here!

Postby Ev_O))) » Mon Jun 22, 2015 10:59 pm

Just sold my Buzzz to buy a TAFM. This thread will prove to be a valuable resource I have no doubt.
I make noise, droney music: http://blasariusyonder.com
Joel Korte wrote:It's always your fucking fault
Ev_O)))

User avatar
experienced
experienced
 
Posts: 958
Joined: Tue Mar 18, 2014 7:53 am
Location: Melbourne, Australia

Re: team awesome! fuzzmachine settings - post them here!

Postby smallsnd/bigsnd » Wed Jun 24, 2015 2:02 am

Ev_O))) wrote:Just sold my Buzzz to buy a TAFM. This thread will prove to be a valuable resource I have no doubt.


DAMN YO should've kept em all :hobbes:
smallsnd/bigsnd

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 3981
Joined: Sat Nov 29, 2008 12:57 pm

Re: team awesome! fuzzmachine settings - post them here!

Postby Ev_O))) » Sat Jun 27, 2015 12:34 am

smallsnd/bigsnd wrote:
Ev_O))) wrote:Just sold my Buzzz to buy a TAFM. This thread will prove to be a valuable resource I have no doubt.


DAMN YO should've kept em all :hobbes:



I wish. Between the real estate and the $ I just couldn't swing it :(

TAFM recieved though!

Image
I make noise, droney music: http://blasariusyonder.com
Joel Korte wrote:It's always your fucking fault
Ev_O)))

User avatar
experienced
experienced
 
Posts: 958
Joined: Tue Mar 18, 2014 7:53 am
Location: Melbourne, Australia

Re: team awesome! fuzzmachine settings - post them here!

Postby smallsnd/bigsnd » Sat Jun 27, 2015 6:29 pm

Ev_O))) wrote:
smallsnd/bigsnd wrote:
Ev_O))) wrote:Just sold my Buzzz to buy a TAFM. This thread will prove to be a valuable resource I have no doubt.


DAMN YO should've kept em all :hobbes:



I wish. Between the real estate and the $ I just couldn't swing it :(



all good! :thumb:
smallsnd/bigsnd

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 3981
Joined: Sat Nov 29, 2008 12:57 pm

Re: team awesome! fuzzmachine settings - post them here!

Postby neonblack » Sat Jun 27, 2015 6:44 pm

^^ Just snagged a TAFM just like that one.

This is my...third one?

I think I've learned my lesson. I can't quit you, Team Awesome.
neonblack

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 8090
Joined: Fri Feb 28, 2014 12:00 am
Location: Wilmington, NC

Re: team awesome! fuzzmachine settings - post them here!

Postby goosekevin » Thu Sep 03, 2015 6:50 am

this is my regular check in to say the tafm is the fuzz love of my life
Volume switch: down
Mids switch: down
Clean volume: 9
Fuzz volume: 12
Shape: 11
Fuzz: 1
Input: 12

my faaaavourite sound, especially being fed a bunch of reverb and/or other effects
hit the gate for a sweet fuzz boost

so good
Derelict78 wrote:That probably sounds awful in the best possible way.
goosekevin

User avatar
Supporter
Supporter
 
Posts: 2236
Joined: Tue Jul 10, 2012 10:25 pm
Location: NSW Australia

Re: team awesome! fuzzmachine settings - post them here!

Postby ogguitar » Mon Nov 02, 2015 4:59 am

Just got mine and think I might have found a favorite setting

Fuzz: 1:00
Shape: 12:00
Volume: 10:00
Mids: Up
Vol switch: Down
Gain: 7:00
Clean: 12:30
ogguitar

involved
involved
 
Posts: 98
Joined: Sun Dec 22, 2013 3:23 am

Re: team awesome! fuzzmachine settings - post them here!

Postby Ev_O))) » Tue Nov 03, 2015 8:30 pm

Image

Sup. Gate on or off, depending on what else is going on.
I make noise, droney music: http://blasariusyonder.com
Joel Korte wrote:It's always your fucking fault
Ev_O)))

User avatar
experienced
experienced
 
Posts: 958
Joined: Tue Mar 18, 2014 7:53 am
Location: Melbourne, Australia

Re: team awesome! fuzzmachine settings - post them here!

Postby smallsnd/bigsnd » Wed Nov 04, 2015 3:38 pm

Ev_O))) wrote:Sup. Gate on or off, depending on what else is going on.


i love that you're using the phase toggle up and getting those weird octave up tones. :)* :)* :)*
smallsnd/bigsnd

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 3981
Joined: Sat Nov 29, 2008 12:57 pm

PreviousNext

Return to smallsound/bigsound



Who is online

Users browsing this forum: No registered users and 8 guests


Sponsored Ad. (Please no inflated/repetitive clicking. Thanks!)



ilovefuzz.com is not responsible for user-submitted content. Users participate at their own discretion and risk.